From dd31d0207ba2acebfb65400e916a624a57c638a4 Mon Sep 17 00:00:00 2001 From: Federico Igne Date: Sat, 23 May 2020 11:01:36 +0100 Subject: Add applied patches to README.md --- README.md | 43 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 README.md (limited to 'README.md') diff --git a/README.md b/README.md new file mode 100644 index 0000000..195f6f3 --- /dev/null +++ b/README.md @@ -0,0 +1,43 @@ +# A personal fork of st - the suckless terminal + +## Patches + +Look at the commit history for more details on how/why these patches +were applied. + ++ [font2](https://st.suckless.org/patches/font2/) - allows the + definition of fallback fonts; ++ [desktopentry](https://st.suckless.org/patches/desktopentry/) - add + desktop entry during installation; ++ [scrollback](https://st.suckless.org/patches/scrollback/) - enables + buffer scrollback. + +Requirements +------------ +In order to build st you need the Xlib header files. + + +Installation +------------ +Edit config.mk to match your local setup (st is installed into +the /usr/local namespace by default). + +Afterwards enter the following command to build and install st (if +necessary as root): + + make clean install + + +Running st +---------- +If you did not install st with make clean install, you must compile +the st terminfo entry with the following command: + + tic -sx st.info + +See the man page for additional details. + +Credits +------- +Based on Aurélien APTEL bt source code. + -- cgit v1.2.3