diff options
| author | Mark <cableguy67@gmail.com> | 2019-05-25 00:18:57 +0300 |
|---|---|---|
| committer | Drashna Jaelre <drashna@live.com> | 2019-05-24 14:18:57 -0700 |
| commit | 4f1537b879366664c94faaef22190c2828115a26 (patch) | |
| tree | c10cdabbecc968523c3941617f287ba28231226f | |
| parent | a1e2d51712385a12bba7d592e391200742be5ad7 (diff) | |
| download | qmk_firmware-4f1537b879366664c94faaef22190c2828115a26.tar.gz qmk_firmware-4f1537b879366664c94faaef22190c2828115a26.zip | |
[Keyboard] Fix formatting on keyboard to micro connection table (#5968)
* Fix formatting on keyboard to micro connection table
* Add whitespace to make more readable
| -rw-r--r-- | keyboards/converter/palm_usb/readme.md | 7 |
1 files changed, 4 insertions, 3 deletions
diff --git a/keyboards/converter/palm_usb/readme.md b/keyboards/converter/palm_usb/readme.md index 17ba329da..850005d9e 100644 --- a/keyboards/converter/palm_usb/readme.md +++ b/keyboards/converter/palm_usb/readme.md | |||
| @@ -23,9 +23,10 @@ qmk because the Arduino softserial library uses different pins from QMK. | |||
| 23 | 23 | ||
| 24 | I've wired the pro micro hardware as follows. | 24 | I've wired the pro micro hardware as follows. |
| 25 | 25 | ||
| 26 | Label| TX0,RX1,GND,GND,2 ,3 ,4 ,5 ,6 ,7 | 26 | | Label | TX0 | RX1 | GND | GND | 2 | 3 | 4 | 5 | 6 | 7 | |
| 27 | Palm | , , * ,GND,VCC,RX ,NC ,RTS,nc ,DCD | 27 | | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | |
| 28 | MCU | ,D1 ,D0 , ,C6 , ,E6 | 28 | | Palm | | | * | GND | VCC | RX | NC | RTS | NC | DCD | |
| 29 | | MCU | | | | | D1 | D0 | | C6 | | E6 | | ||
| 29 | 30 | ||
| 30 | \* The RX line from the keyboard should be conected to a ~10K ohm pull down resistor to ground. | 31 | \* The RX line from the keyboard should be conected to a ~10K ohm pull down resistor to ground. |
| 31 | RX --|--3 | 32 | RX --|--3 |