[Keyboard] Added Abstract Ellipse Rev1 (#5939)

* mostly done with first version of Ellipse Rev1 software

* mostly done, error with backlight breathing

* more testing and changing default keymaps

* ready for first release attempt

* fix newline in readme

* fix copyright and extraneous declarations and symbols

* remove more excess backslashes

* fixed more formatting

14 files changed, 620 insertions, 0 deletions

diff --git a/keyboards/abstract/ellipse/info.json b/keyboards/abstract/ellipse/info.json
new file mode 100644
index 000000000..8ad50e6ca
--- /dev/null
+++ b/keyboards/abstract/ellipse/info.json
@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "Ellipse", 
+    "url": "https://abstractkb.tk/product/ellipse-rev1", 
+    "maintainer": "AbstractKB", 
+    "width": 3, 
+    "height": 2.25, 
+    "layouts": {
+        "LAYOUT": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":0, "y":1.25}, {"x":1, "y":1.25}, {"x":2, "y":1.25}]
+        }
+    }
+}
\ No newline at end of file
diff --git a/keyboards/abstract/ellipse/keymaps/abstractkb/config.h b/keyboards/abstract/ellipse/keymaps/abstractkb/config.h
new file mode 100644
index 000000000..3bc66cd9b
--- /dev/null
+++ b/keyboards/abstract/ellipse/keymaps/abstractkb/config.h
@@ -0,0 +1,23 @@
+/* Copyright 2019 AbstractKB
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define BACKLIGHT_BREATHING
+#define BREATHING_PERIOD 2
+#define RGBLIGHT_ANIMATIONS
+
+// place overrides here
diff --git a/keyboards/abstract/ellipse/keymaps/abstractkb/keymap.c b/keyboards/abstract/ellipse/keymaps/abstractkb/keymap.c
new file mode 100644
index 000000000..8d649419d
--- /dev/null
+++ b/keyboards/abstract/ellipse/keymaps/abstractkb/keymap.c
@@ -0,0 +1,66 @@
+/* Copyright 2019 AbstractKB
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+/*enum custom_keycodes {
+  MYKEY = SAFE_RANGE
+};*/
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT( /* Base */
+    KC_MUTE,  RGB_TOG,  BL_TOGG,
+    RGB_M_SW,  RGB_M_P, BL_BRTG
+  )
+};
+
+/*bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}*/
+
+/*void matrix_init_user(void) {
+
+}*/
+
+/*void matrix_scan_user(void) {
+
+}*/
+
+/*void led_set_user(uint8_t usb_led) {
+
+}*/
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+        if (index == 0) { /* First encoder */
+                if (clockwise) {
+                        tap_code(KC_VOLU);
+                } else {
+                        tap_code(KC_VOLD);
+                }
+        } else if (index == 1) { /* Second encoder */
+                if (clockwise) {
+                        rgblight_increase_hue_noeeprom();
+                } else {
+                        rgblight_decrease_hue_noeeprom();
+                }
+        } else if (index == 2) { /* Third encoder */
+                if (clockwise) {
+                        backlight_increase();
+                } else {
+                        backlight_decrease();
+                }
+        }
+}
\ No newline at end of file
diff --git a/keyboards/abstract/ellipse/keymaps/abstractkb/readme.md b/keyboards/abstract/ellipse/keymaps/abstractkb/readme.md
new file mode 100644
index 000000000..5db2eb647
--- /dev/null
+++ b/keyboards/abstract/ellipse/keymaps/abstractkb/readme.md
@@ -0,0 +1,3 @@
+# My keymap
+
+This was used for testing lights but will become my personal keymap
\ No newline at end of file
diff --git a/keyboards/abstract/ellipse/keymaps/abstractkb/rules.mk b/keyboards/abstract/ellipse/keymaps/abstractkb/rules.mk
new file mode 100644
index 000000000..54a2685bf
--- /dev/null
+++ b/keyboards/abstract/ellipse/keymaps/abstractkb/rules.mk
@@ -0,0 +1 @@
+BACKLIGHT_ENABLE = yes
\ No newline at end of file
diff --git a/keyboards/abstract/ellipse/keymaps/default/config.h b/keyboards/abstract/ellipse/keymaps/default/config.h
new file mode 100644
index 000000000..e406c488b
--- /dev/null
+++ b/keyboards/abstract/ellipse/keymaps/default/config.h
@@ -0,0 +1,19 @@
+/* Copyright 2019 AbstractKB
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here
diff --git a/keyboards/abstract/ellipse/keymaps/default/keymap.c b/keyboards/abstract/ellipse/keymaps/default/keymap.c
new file mode 100644
index 000000000..ac1ec986b
--- /dev/null
+++ b/keyboards/abstract/ellipse/keymaps/default/keymap.c
@@ -0,0 +1,66 @@
+/* Copyright 2019 AbstractKB
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+/*enum custom_keycodes {
+  MYKEY = SAFE_RANGE
+};*/
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT( /* Base */
+    KC_A,       RGB_TOG,        KC_C,
+    KC_X,       KC_Y,           KC_Z
+  )
+};
+
+/*bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}*/
+
+/*void matrix_init_user(void) {
+
+}*/
+
+/*void matrix_scan_user(void) {
+
+}*/
+
+/*void led_set_user(uint8_t usb_led) {
+
+}*/
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+        if (index == 0) { /* First encoder */
+                if (clockwise) {
+                        tap_code(KC_O);
+                } else {
+                        tap_code(KC_P);
+                }
+        } else if (index == 1) { /* Second encoder */
+                if (clockwise) {
+                        rgblight_increase_hue_noeeprom();
+                } else {
+                        rgblight_decrease_hue_noeeprom();
+                }
+        } else if (index == 2) {
+                if (clockwise) {
+                        tap_code(KC_M);
+                } else {
+                        tap_code(KC_R);
+                }
+        }
+}
\ No newline at end of file
diff --git a/keyboards/abstract/ellipse/keymaps/default/readme.md b/keyboards/abstract/ellipse/keymaps/default/readme.md
new file mode 100644
index 000000000..e14c0c8bd
--- /dev/null
+++ b/keyboards/abstract/ellipse/keymaps/default/readme.md
@@ -0,0 +1,6 @@
+# The default keymap for Ellipse
+
+This keymap allows for basic testing of the keypad once assembled.
+Each knob and key outputs a different standard letter keycode,
+except for the middle knob which changes the hue of the RGB LEDs and when
+pressed down turns off the RGB LEDs
\ No newline at end of file
diff --git a/keyboards/abstract/ellipse/keymaps/default/rules.mk b/keyboards/abstract/ellipse/keymaps/default/rules.mk
new file mode 100644
index 000000000..e69de29bb
--- /dev/null
+++ b/keyboards/abstract/ellipse/keymaps/default/rules.mk
diff --git a/keyboards/abstract/ellipse/readme.md b/keyboards/abstract/ellipse/readme.md
new file mode 100644
index 000000000..973d36f44
--- /dev/null
+++ b/keyboards/abstract/ellipse/readme.md
@@ -0,0 +1,19 @@
+# EllipseRev1
+
+![EllipseRev1](http://abstractkb.tk/wp-content/uploads/2019/03/ellipsetop.jpg)
+
+A small keypad with more knobs than ever before!  3 Knobs and 3 MX-style switches on one little board.
+
+At this time there are 2 small known issues with the Rev 1.  One of which is that backlight breathing does not work,
+and the other issue that has been encountered is that the post_init_user function does not seem to be called.
+Hopefully these issues can be resolved soon; this QMK file is being released as orders have started to ship and they need to be configurable.
+
+Keyboard Maintainer: [AbstractKB](https://github.com/abstractkb)  
+Hardware Supported: The Abstract Ellipse Rev1  
+Hardware Availability: https://abstractkb.tk
+
+Make example for this keyboard (after setting up your build environment):
+
+    make abstract/ellipse/rev1:default:dfu
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/abstract/ellipse/rev1/config.h b/keyboards/abstract/ellipse/rev1/config.h
new file mode 100644
index 000000000..4fcf96eb3
--- /dev/null
+++ b/keyboards/abstract/ellipse/rev1/config.h
@@ -0,0 +1,245 @@
+/*
+Copyright 2019 AbstractKB
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0001
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    AbstractKB
+#define PRODUCT         EllipseRev1
+#define DESCRIPTION     The Ellipse Macropad
+
+/* key matrix size */
+#define MATRIX_ROWS 2
+#define MATRIX_COLS 3
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D3, C7 }
+#define MATRIX_COL_PINS { F0, B6, B5 }
+#define UNUSED_PINS { B0, D0, D1, D2, D4, D6, D7, F1, F4, F5, F6, F7 }
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN C6
+//#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 15
+
+#define RGB_DI_PIN E6
+#ifdef RGB_DI_PIN
+   #define RGBLED_NUM 3
+   #define RGBLIGHT_HUE_STEP 8
+   #define RGBLIGHT_SAT_STEP 8
+   #define RGBLIGHT_VAL_STEP 8
+   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/*#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)*/
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0
+
+#define NUMBER_OF_ENCODERS 3
+#define ENCODERS_PAD_A { B2, B3, D5 }
+#define ENCODERS_PAD_B { B1, B7, B4 }
+#define ENCODER_RESOLUTION 2
diff --git a/keyboards/abstract/ellipse/rev1/rev1.c b/keyboards/abstract/ellipse/rev1/rev1.c
new file mode 100644
index 000000000..ae7aa640e
--- /dev/null
+++ b/keyboards/abstract/ellipse/rev1/rev1.c
@@ -0,0 +1,43 @@
+/* Copyright 2019 AbstractKB
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "rev1.h"
+
+/*void matrix_init_kb(void) {
+        // put your keyboard start-up code here
+        // runs once when the firmware starts up
+
+        matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+        // put your looping keyboard code here
+        // runs every cycle (a lot)
+
+        matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+        // put your per-action keyboard code here
+        // runs for every action, just before processing by the firmware
+
+        return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+        // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+        led_set_user(usb_led);
+}*/
\ No newline at end of file
diff --git a/keyboards/abstract/ellipse/rev1/rev1.h b/keyboards/abstract/ellipse/rev1/rev1.h
new file mode 100644
index 000000000..de8b9bacb
--- /dev/null
+++ b/keyboards/abstract/ellipse/rev1/rev1.h
@@ -0,0 +1,36 @@
+/* Copyright 2019 AbstractKB
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    K00, K01, K02, \
+    K10, K11, K12   \
+) \
+{ \
+    { K00, K01,   K02 }, \
+    { K10, K11,   K12 }, \
+}
+
diff --git a/keyboards/abstract/ellipse/rev1/rules.mk b/keyboards/abstract/ellipse/rev1/rules.mk
new file mode 100644
index 000000000..880d40e49
--- /dev/null
+++ b/keyboards/abstract/ellipse/rev1/rules.mk
@@ -0,0 +1,81 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no             # Enable support for HD44780 based LCDs (+400)
+ENCODER_ENABLE = yes            # Enable support for rotary encoders