Merge pull request #529 from CommandLineDesign/CMD60-newKeymap

Added CMD60 keymap

6 files changed, 364 insertions, 0 deletions

diff --git a/keyboards/handwired/CMD60/CMD60.c b/keyboards/handwired/CMD60/CMD60.c
new file mode 100644
index 000000000..799848e34
--- /dev/null
+++ b/keyboards/handwired/CMD60/CMD60.c
@@ -0,0 +1,8 @@
+#include "CMD60.h"
+
+void matrix_init_kb(void) {
+        // put your keyboard start-up code here
+        // runs once when the firmware starts up
+
+        matrix_init_user();
+}
diff --git a/keyboards/handwired/CMD60/CMD60.h b/keyboards/handwired/CMD60/CMD60.h
new file mode 100644
index 000000000..f90871fc7
--- /dev/null
+++ b/keyboards/handwired/CMD60/CMD60.h
@@ -0,0 +1,20 @@
+#ifndef CMD60_H
+#define CMD60_H
+
+#include "quantum.h"
+
+#define KEYMAP( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
+    K40, K41, K42,           K45,                     K4A, K4B, K4C, K4D  \
+    ) { \
+  {  K00,  K01,  K02,  K03,    K04,    K05,  K06,    K07,    K08,    K09,  K0A,  K0B,  K0C,  K0D  },  \
+  {  K10,  K11,  K12,  K13,    K14,    K15,  K16,    K17,    K18,    K19,  K1A,  K1B,  K1C,  K1D  },  \
+  {  K20,  K21,  K22,  K23,    K24,    K25,  K26,    K27,    K28,    K29,  K2A,  K2B,  K2C,  K2D  },  \
+  {  K30,  K31,  K32,  K33,    K34,    K35,  K36,    K37,    K38,    K39,  K3A,  K3B,  K3C,  K3D  },  \
+  {  K40,  K41,  K42,  KC_NO,  KC_NO,  K45,  KC_NO,  KC_NO,  KC_NO,  KC_NO,K4A,  K4B,  K4C,  K4D  }   \
+}
+
+#endif
\ No newline at end of file
diff --git a/keyboards/handwired/CMD60/Makefile b/keyboards/handwired/CMD60/Makefile
new file mode 100644
index 000000000..711759917
--- /dev/null
+++ b/keyboards/handwired/CMD60/Makefile
@@ -0,0 +1,73 @@
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes        # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no            # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no            # MIDI controls
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6
+
+ifndef QUANTUM_DIR
+        include ../../../Makefile
+endif
+
+
diff --git a/keyboards/handwired/CMD60/README.md b/keyboards/handwired/CMD60/README.md
new file mode 100644
index 000000000..83e371543
--- /dev/null
+++ b/keyboards/handwired/CMD60/README.md
@@ -0,0 +1,35 @@
+CMD60 keyboard firmware
+======================
+
+##CMD60
+
+This layout has been designed to optimize use of the left-hand, and it focussed specifically on programmers who work
+with text editors like SublimeText and Atom. It utilizes the power of Space_fn, and features a caps lock swap for Fn2
+and enter key on tap. These features allow you to keep your right hand on the mouse more and should enable you to
+achieve a higher level of productivity if you take the time to learn its function layers.
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent readme.md](/doc/readme.md).
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboards/handwired/CMD60 folder.
+Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use
+the Teensy Loader to program your .hex file.
+
+Depending on which keymap you would like to use, you will have to compile slightly differently.
+
+### Default
+
+To build with the default keymap, simply run `make`.
+
+### Other Keymaps
+
+To build the firmware binary hex file with a keymap just do `make` with `keymap` option like:
+
+```
+$ make keymap=[default|jack|<name>]
+```
+
+Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`
diff --git a/keyboards/handwired/CMD60/config.h b/keyboards/handwired/CMD60/config.h
new file mode 100644
index 000000000..27eb400b8
--- /dev/null
+++ b/keyboards/handwired/CMD60/config.h
@@ -0,0 +1,162 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    cmd
+#define PRODUCT         CMD60
+#define DESCRIPTION     Advanced Programming Keeb Layout
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { F0, F4, F5, F6, F7 }
+#define MATRIX_COL_PINS { B0, B1, B2, B3, B7, D0, D1, D2, D3, C6, D7, B4, B5, B6 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/handwired/CMD60/keymaps/default/keymap.c b/keyboards/handwired/CMD60/keymaps/default/keymap.c
new file mode 100644
index 000000000..9f9cbcd66
--- /dev/null
+++ b/keyboards/handwired/CMD60/keymaps/default/keymap.c
@@ -0,0 +1,66 @@
+#include "CMD60.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = KEYMAP( /* CMD60 - QWERTY */
+      KC_ESC,   KC_1,     KC_2,     KC_3,    KC_4,     KC_5,     KC_6,     KC_7,    KC_8,  KC_9,     KC_0,     KC_MINS,  KC_EQL,   KC_BSPC,  \
+      KC_TAB,   KC_Q,     KC_W,     KC_E,    KC_R,     KC_T,     KC_Y,     KC_U,    KC_I,  KC_O,     KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS,  \
+      LT(3, KC_ENT),  KC_A,     KC_S,     KC_D,    KC_F,     KC_G,     KC_H,     KC_J,    KC_K,  KC_L,     KC_SCLN,  KC_QUOT,  KC_NO,    KC_ENT,   \
+      KC_LSFT,  KC_Z,    KC_X,     KC_C,    KC_V,     KC_B,     KC_N,     KC_M,    KC_COMM,  KC_DOT,  KC_SLSH,   KC_NO,  KC_NO,    KC_RSFT,  \
+      KC_LCTL,  KC_LGUI,  KC_LALT,                     LT(2, KC_SPC),                                       MO(3),  MO(4),  MO(5),  TG(1) \
+  ),
+  [1] = KEYMAP( /* CMD60 - GameMode */
+      KC_TRNS,   KC_TRNS,     KC_TRNS,     KC_TRNS,    KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_TRNS,    KC_TRNS,  KC_TRNS,     KC_TRNS,     KC_TRNS,  KC_TRNS,   KC_TRNS,  \
+      KC_TRNS,   KC_TRNS,     KC_TRNS,     KC_TRNS,    KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_TRNS,    KC_TRNS,  KC_TRNS,     KC_TRNS,     KC_TRNS,  KC_TRNS,  KC_TRNS,  \
+      KC_CAPS,  KC_TRNS,  KC_TRNS,     KC_TRNS,    KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_TRNS,    KC_TRNS,  KC_TRNS,     KC_TRNS,  KC_TRNS,  KC_NO,    KC_TRNS,   \
+      KC_LSFT,  KC_TRNS,    KC_TRNS,     KC_TRNS,    KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_TRNS,    KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_NO,  KC_NO,    KC_RSFT,  \
+      KC_TRNS,  KC_NO,  KC_TRNS,                     KC_SPC,                                       KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS \
+  ),
+  [2] = KEYMAP( /* CMD60 - Arrows */
+      KC_GRV,   KC_F1,     KC_F2,     KC_F3,    KC_F4,     KC_F5,     KC_F6,     KC_F7,    KC_F8,  KC_F9,     KC_F10,     KC_F11,  KC_F12,   KC_DEL,  \
+      KC_TRNS,   KC_BSPC,     KC_UP,     KC_DEL,    KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_BSPC,    KC_UP,  KC_DEL,     KC_PSCR,     KC_SLCK,  KC_PAUS,  KC_TRNS,  \
+      KC_TRNS,  KC_LEFT,  KC_DOWN,     KC_RIGHT,    KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_LEFT,    KC_DOWN,  KC_RIGHT,     KC_TRNS,  KC_TRNS,  KC_NO,    KC_TRNS,   \
+      KC_TRNS,  KC_TRNS,    KC_TRNS,     KC_TRNS,    KC_SPC,     KC_TRNS,     KC_TRNS,     KC_TRNS,    KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_NO,  KC_NO,    KC_TRNS,  \
+      KC_TRNS,  KC_TRNS,  KC_TRNS,                     KC_TRNS,                                       KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS \
+  ),
+  [3] = KEYMAP( /* CMD60 - Functions */
+      KC_GRV,   KC_F1,     KC_F2,     KC_F3,    KC_F4,     KC_F5,     KC_F6,     KC_F7,    KC_F8,  KC_F9,     KC_F10,     KC_F11,  KC_F12,   KC_DEL,  \
+      KC_AUDIO_MUTE,   KC_BSPC,     KC_PGUP,     KC_DEL,    KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_PGUP,    KC_UP,  KC_PGDN,     KC_TRNS,     KC_PAUSE,  KC_SLCK,  KC_PSCREEN,  \
+      KC_TRNS,  KC_HOME,  KC_PGDN,     KC_END,    KC_TRNS,     KC_TRNS,     KC_HOME,     KC_LEFT,    KC_DOWN,  KC_RIGHT,     KC_TRNS,  KC_INSERT,  KC_NO,    KC_TRNS,   \
+      KC_TRNS,  KC_TRNS,    KC_TRNS,     KC_TRNS,    KC_TRNS,     KC_TRNS,     KC_END,     KC_TRNS,    KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_NO,  KC_NO,    KC_TRNS,  \
+      KC_TRNS,  KC_TRNS,  KC_TRNS,                     KC_TRNS,                                       KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS \
+  ),
+  [4] = KEYMAP( /* CMD60 - Mouse */
+      KC_SYSTEM_SLEEP,   KC_TRNS,     KC_TRNS,     KC_TRNS,    KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_TRNS,    KC_TRNS,  KC_TRNS,     KC_TRNS,     KC_TRNS,  KC_TRNS,   KC_TRNS,  \
+      KC_TRNS,   KC_TRNS,     KC_TRNS,     KC_TRNS,    KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_TRNS,    KC_MS_BTN1,  KC_MS_UP,     KC_MS_BTN2,     KC_TRNS,  KC_TRNS,  KC_TRNS,  \
+      KC_TRNS,  KC_TRNS,  KC_TRNS,     KC_TRNS,    KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_TRNS,    KC_MS_LEFT,  KC_MS_DOWN,     KC_MS_RIGHT,  KC_TRNS,  KC_NO,    KC_TRNS,   \
+      KC_TRNS,  KC_TRNS,    KC_TRNS,     KC_TRNS,    KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_TRNS,    KC_MS_WH_UP,  KC_MS_BTN3,  KC_MS_WH_DOWN,   KC_NO,  KC_NO,    KC_TRNS,  \
+      KC_TRNS,  KC_TRNS,  KC_TRNS,                     KC_TRNS,                                       KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS \
+  ),
+  [5] = KEYMAP( /* CMD60 - Media */
+      KC_SYSTEM_WAKE,   KC_TRNS,     KC_TRNS,     KC_TRNS,    KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_TRNS,    KC_TRNS,  KC_TRNS,     KC_TRNS,     KC_TRNS,  KC_TRNS,   KC_TRNS,  \
+      KC_TRNS,   KC_TRNS,     KC_TRNS,     KC_TRNS,    KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_TRNS,    KC_TRNS,  KC_TRNS,     KC_TRNS,     KC_AUDIO_VOL_DOWN,  KC_AUDIO_VOL_UP,  KC_AUDIO_MUTE,  \
+      KC_TRNS,  KC_TRNS,  KC_TRNS,     KC_TRNS,    KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_TRNS,    KC_TRNS,  KC_TRNS,     KC_TRNS,  KC_MEDIA_PREV_TRACK,  KC_MEDIA_NEXT_TRACK,    KC_MEDIA_PLAY_PAUSE,   \
+      KC_TRNS,  KC_TRNS,    KC_TRNS,     KC_TRNS,    KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_TRNS,    KC_TRNS,  KC_WWW_BACK,  KC_WWW_FORWARD,   KC_NO,  KC_NO,    KC_WWW_REFRESH,  \
+      KC_TRNS,  KC_TRNS,  KC_TRNS,                     KC_TRNS,                                       KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS \
+  ),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+          } else {
+            unregister_code(KC_RSFT);
+          }
+        break;
+      }
+    return MACRO_NONE;
+};