Additional changes for Layer State typedef compatibility (#5906)

* Additional changes for Layer State typedef compatibility

* Replace biton32 with get_highest_layer in docs

* Change additional layer structure code

* Fix uGFX reference issue

* Remove dynamic_keymap check

* Where did all these extra spaces come from

Co-Authored-By: fauxpark <fauxpark@gmail.com>

4 files changed, 11 insertions, 11 deletions

diff --git a/docs/custom_quantum_functions.md b/docs/custom_quantum_functions.md
index 7be82c650..839d49ca0 100644
--- a/docs/custom_quantum_functions.md
+++ b/docs/custom_quantum_functions.md
@@ -297,8 +297,8 @@ This runs code every time that the layers get changed.  This can be useful for l
 This example shows how to set the [RGB Underglow](feature_rgblight.md) lights based on the layer, using the Planck as an example
 
 ```c
-uint32_t layer_state_set_user(uint32_t state) {
-    switch (biton32(state)) {
+layer_state_t layer_state_set_user(layer_state_t state) {
+    switch (get_highest_layer(state)) {
     case _RAISE:
         rgblight_setrgb (0x00,  0x00, 0xFF);
         break;
@@ -320,8 +320,8 @@ uint32_t layer_state_set_user(uint32_t state) {
 ```
 ### `layer_state_set_*` Function Documentation
 
-* Keyboard/Revision: `uint32_t layer_state_set_kb(uint32_t state)`
-* Keymap: `uint32_t layer_state_set_user(uint32_t state)`
+* Keyboard/Revision: `layer_state_t layer_state_set_kb(layer_state_t state)`
+* Keymap: `layer_state_t layer_state_set_user(layer_state_t state)`
 
 
 The `state` is the bitmask of the active layers, as explained in the [Keymap Overview](keymap.md#keymap-layer-status)
@@ -377,8 +377,8 @@ void keyboard_post_init_user(void) {
 The above function will use the EEPROM config immediately after reading it, to set the default layer's RGB color. The "raw" value of it is converted in a usable structure based on the "union" that you created above. 
 
 ```c
-uint32_t layer_state_set_user(uint32_t state) {
-    switch (biton32(state)) {
+layer_state_t layer_state_set_user(layer_state_t state) {
+    switch (get_highest_layer(state)) {
     case _RAISE:
         if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom_magenta(); rgblight_mode_noeeprom(1); }
         break;
diff --git a/docs/feature_oled_driver.md b/docs/feature_oled_driver.md
index 503e43828..9d19beedb 100644
--- a/docs/feature_oled_driver.md
+++ b/docs/feature_oled_driver.md
@@ -31,7 +31,7 @@ This enables the feature and the `OLED_DRIVER_ENABLE` define. Then in your `keym
 void oled_task_user(void) {
   // Host Keyboard Layer Status
   oled_write_P(PSTR("Layer: "), false);
-  switch (biton32(layer_state)) {
+  switch (get_highest_layer(layer_state)) {
     case _QWERTY:
       oled_write_P(PSTR("Default\n"), false);
       break;
diff --git a/docs/feature_userspace.md b/docs/feature_userspace.md
index 2f119c8bd..1cc8ca742 100644
--- a/docs/feature_userspace.md
+++ b/docs/feature_userspace.md
@@ -115,11 +115,11 @@ For instance, let's look at the `layer_state_set_user()` function.  You can enab
 In your `<name.c>` file, you'd want to add this: 
 ```c
 __attribute__ ((weak))
-uint32_t layer_state_set_keymap (uint32_t state) {
+layer_state_t layer_state_set_keymap (layer_state_t state) {
   return state;
 }
 
-uint32_t layer_state_set_user (uint32_t state) {
+layer_state_t layer_state_set_user (layer_state_t state) {
   state = update_tri_layer_state(state, 2, 3, 5);
   return layer_state_set_keymap (state);
 }
diff --git a/docs/ref_functions.md b/docs/ref_functions.md
index 174d9a95a..1ac83cec4 100644
--- a/docs/ref_functions.md
+++ b/docs/ref_functions.md
@@ -50,7 +50,7 @@ The caveat to this method is that you cannot access the `z` layer without having
 #### Example
 
 ```c
-uint32_t layer_state_set_user(uint32_t state) {
+layer_state_t layer_state_set_user(layer_state_t state) {
   return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
 }
 ```
@@ -58,7 +58,7 @@ uint32_t layer_state_set_user(uint32_t state) {
 Alternatively, you don't have to immediately "return" the value.  This is useful if you want to add multiple tri layers, or if you want to add additional effects.
 
 ```c
-uint32_t layer_state_set_user(uint32_t state) {
+layer_state_t layer_state_set_user(layer_state_t state) {
   state = update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
   state = update_tri_layer_state(state, _RAISE, _SYMB, _SPECIAL);
   return state;