aboutsummaryrefslogtreecommitdiff
path: root/keyboards/namecard2x4
diff options
context:
space:
mode:
authorfauxpark <fauxpark@gmail.com>2019-10-26 12:32:18 +1100
committerDrashna Jaelre <drashna@live.com>2019-10-25 18:32:18 -0700
commit5d34e70cf773531536dda363fc43c60146e3d97c (patch)
treeaa8a7117dc5d46c4a43fb99fcc2c4f2ff93382ec /keyboards/namecard2x4
parent006ec86786da874938f54e9b1d0f4a5f049de546 (diff)
downloadqmk_firmware-5d34e70cf773531536dda363fc43c60146e3d97c.tar.gz
qmk_firmware-5d34e70cf773531536dda363fc43c60146e3d97c.zip
Cleanup rules.mk for 32U4 keyboards, N-Q (#7147)
Diffstat (limited to 'keyboards/namecard2x4')
-rw-r--r--keyboards/namecard2x4/rev1/rules.mk80
-rw-r--r--keyboards/namecard2x4/rev2/rules.mk80
-rw-r--r--keyboards/namecard2x4/rules.mk35
3 files changed, 35 insertions, 160 deletions
diff --git a/keyboards/namecard2x4/rev1/rules.mk b/keyboards/namecard2x4/rev1/rules.mk
index 407298e90..e69de29bb 100644
--- a/keyboards/namecard2x4/rev1/rules.mk
+++ b/keyboards/namecard2x4/rev1/rules.mk
@@ -1,80 +0,0 @@
1# MCU name
2MCU = atmega32u4
3
4# Processor frequency.
5# This will define a symbol, F_CPU, in all source code files equal to the
6# processor frequency in Hz. You can then use this symbol in your source code to
7# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
8# automatically to create a 32-bit value in your source code.
9#
10# This will be an integer division of F_USB below, as it is sourced by
11# F_USB after it has run through any CPU prescalers. Note that this value
12# does not *change* the processor frequency - it should merely be updated to
13# reflect the processor speed set externally so that the code can use accurate
14# software delays.
15F_CPU = 16000000
16
17
18#
19# LUFA specific
20#
21# Target architecture (see library "Board Types" documentation).
22ARCH = AVR8
23
24# Input clock frequency.
25# This will define a symbol, F_USB, in all source code files equal to the
26# input clock frequency (before any prescaling is performed) in Hz. This value may
27# differ from F_CPU if prescaling is used on the latter, and is required as the
28# raw input clock is fed directly to the PLL sections of the AVR for high speed
29# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
30# at the end, this will be done automatically to create a 32-bit value in your
31# source code.
32#
33# If no clock division is performed on the input clock inside the AVR (via the
34# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
35F_USB = $(F_CPU)
36
37# Interrupt driven control endpoint task(+60)
38OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
39
40
41# Boot Section Size in *bytes*
42# Teensy halfKay 512
43# Teensy++ halfKay 1024
44# Atmel DFU loader 4096
45# LUFA bootloader 4096
46# USBaspLoader 2048
47# OPT_DEFS += -DBOOTLOADER_SIZE=4096
48
49# Bootloader selection
50# Teensy halfkay
51# Pro Micro caterina
52# Atmel DFU atmel-dfu
53# LUFA DFU lufa-dfu
54# QMK DFU qmk-dfu
55# atmega32a bootloadHID
56BOOTLOADER = atmel-dfu
57
58
59# Build Options
60# change yes to no to disable
61#
62BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
63MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
64EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
65CONSOLE_ENABLE = yes # Console for debug(+400)
66COMMAND_ENABLE = yes # Commands for debug and configuration
67# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
68SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
69# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
70NKRO_ENABLE = no # USB Nkey Rollover
71BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
72MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
73UNICODE_ENABLE = no # Unicode
74BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
75AUDIO_ENABLE = no # Audio output on port C6
76FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
77HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
78
79#UNICODEMAP_ENABLE = yes # for emoji user
80#RGBLIGHT_ENABLE = yes # uncomment if you want addressable led strips
diff --git a/keyboards/namecard2x4/rev2/rules.mk b/keyboards/namecard2x4/rev2/rules.mk
index 407298e90..e69de29bb 100644
--- a/keyboards/namecard2x4/rev2/rules.mk
+++ b/keyboards/namecard2x4/rev2/rules.mk
@@ -1,80 +0,0 @@
1# MCU name
2MCU = atmega32u4
3
4# Processor frequency.
5# This will define a symbol, F_CPU, in all source code files equal to the
6# processor frequency in Hz. You can then use this symbol in your source code to
7# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
8# automatically to create a 32-bit value in your source code.
9#
10# This will be an integer division of F_USB below, as it is sourced by
11# F_USB after it has run through any CPU prescalers. Note that this value
12# does not *change* the processor frequency - it should merely be updated to
13# reflect the processor speed set externally so that the code can use accurate
14# software delays.
15F_CPU = 16000000
16
17
18#
19# LUFA specific
20#
21# Target architecture (see library "Board Types" documentation).
22ARCH = AVR8
23
24# Input clock frequency.
25# This will define a symbol, F_USB, in all source code files equal to the
26# input clock frequency (before any prescaling is performed) in Hz. This value may
27# differ from F_CPU if prescaling is used on the latter, and is required as the
28# raw input clock is fed directly to the PLL sections of the AVR for high speed
29# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
30# at the end, this will be done automatically to create a 32-bit value in your
31# source code.
32#
33# If no clock division is performed on the input clock inside the AVR (via the
34# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
35F_USB = $(F_CPU)
36
37# Interrupt driven control endpoint task(+60)
38OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
39
40
41# Boot Section Size in *bytes*
42# Teensy halfKay 512
43# Teensy++ halfKay 1024
44# Atmel DFU loader 4096
45# LUFA bootloader 4096
46# USBaspLoader 2048
47# OPT_DEFS += -DBOOTLOADER_SIZE=4096
48
49# Bootloader selection
50# Teensy halfkay
51# Pro Micro caterina
52# Atmel DFU atmel-dfu
53# LUFA DFU lufa-dfu
54# QMK DFU qmk-dfu
55# atmega32a bootloadHID
56BOOTLOADER = atmel-dfu
57
58
59# Build Options
60# change yes to no to disable
61#
62BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
63MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
64EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
65CONSOLE_ENABLE = yes # Console for debug(+400)
66COMMAND_ENABLE = yes # Commands for debug and configuration
67# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
68SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
69# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
70NKRO_ENABLE = no # USB Nkey Rollover
71BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
72MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
73UNICODE_ENABLE = no # Unicode
74BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
75AUDIO_ENABLE = no # Audio output on port C6
76FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
77HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
78
79#UNICODEMAP_ENABLE = yes # for emoji user
80#RGBLIGHT_ENABLE = yes # uncomment if you want addressable led strips
diff --git a/keyboards/namecard2x4/rules.mk b/keyboards/namecard2x4/rules.mk
new file mode 100644
index 000000000..d9eff798c
--- /dev/null
+++ b/keyboards/namecard2x4/rules.mk
@@ -0,0 +1,35 @@
1# MCU name
2MCU = atmega32u4
3
4# Bootloader selection
5# Teensy halfkay
6# Pro Micro caterina
7# Atmel DFU atmel-dfu
8# LUFA DFU lufa-dfu
9# QMK DFU qmk-dfu
10# ATmega32A bootloadHID
11# ATmega328P USBasp
12BOOTLOADER = atmel-dfu
13
14# Build Options
15# change yes to no to disable
16#
17BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
18MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
19EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
20CONSOLE_ENABLE = yes # Console for debug(+400)
21COMMAND_ENABLE = yes # Commands for debug and configuration
22# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
23SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
24# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
25NKRO_ENABLE = no # USB Nkey Rollover
26BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
27MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
28UNICODE_ENABLE = no # Unicode
29BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
30AUDIO_ENABLE = no # Audio output on port C6
31FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
32HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
33
34#UNICODEMAP_ENABLE = yes # for emoji user
35#RGBLIGHT_ENABLE = yes # uncomment if you want addressable led strips
generated by cgit v1.2.3 (git 2.25.1) at 2025-11-18 12:32:52 +0000