Merge commit '60b30c036397cb5627fa374bb930794b225daa29' as 'lib/lufa'

1 files changed, 293 insertions, 0 deletions

diff --git a/lib/lufa/LUFA/Drivers/USB/Class/Device/PrinterClassDevice.h b/lib/lufa/LUFA/Drivers/USB/Class/Device/PrinterClassDevice.h
new file mode 100644
index 000000000..802c5912d
--- /dev/null
+++ b/lib/lufa/LUFA/Drivers/USB/Class/Device/PrinterClassDevice.h
@@ -0,0 +1,293 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief Device mode driver for the library USB Printer Class driver.
+ *
+ *  Device mode driver for the library USB Printer Class driver.
+ *
+ *  \note This file should not be included directly. It is automatically included as needed by the USB module driver
+ *        dispatch header located in LUFA/Drivers/USB.h.
+ */
+
+/** \ingroup Group_USBClassPrinter
+ *  \defgroup Group_USBClassPrinterDevice Printer Class Device Mode Driver
+ *
+ *  \section Sec_USBClassPrinterDevice_Dependencies Module Source Dependencies
+ *  The following files must be built with any user project that uses this module:
+ *    - LUFA/Drivers/USB/Class/Device/PrinterClassDevice.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
+ *
+ *  \section Sec_USBClassPrinterDevice_ModDescription Module Description
+ *  Device Mode USB Class driver framework interface, for the Printer USB Class driver.
+ *
+ *  @{
+ */
+
+#ifndef _PRINTER_CLASS_DEVICE_H_
+#define _PRINTER_CLASS_DEVICE_H_
+
+        /* Includes: */
+                #include "../../USB.h"
+                #include "../Common/PrinterClassCommon.h"
+
+                #include <stdio.h>
+
+        /* Enable C linkage for C++ Compilers: */
+                #if defined(__cplusplus)
+                        extern "C" {
+                #endif
+
+        /* Preprocessor Checks: */
+                #if !defined(__INCLUDE_FROM_PRINTER_DRIVER)
+                        #error Do not include this file directly. Include LUFA/Drivers/USB.h instead.
+                #endif
+
+        /* Public Interface - May be used in end-application: */
+                /* Type Defines: */
+                        /** \brief Printer Class Device Mode Configuration and State Structure.
+                         *
+                         *  Class state structure. An instance of this structure should be made for each Printer interface
+                         *  within the user application, and passed to each of the Printer class driver functions as the
+                         *  PRNTInterfaceInfo parameter. This stores each Printer interface's configuration and state information.
+                         */
+                        typedef struct
+                        {
+                                struct
+                                {
+                                        uint8_t InterfaceNumber; /**< Interface number of the Printer interface within the device. */
+
+                                        USB_Endpoint_Table_t DataINEndpoint; /**< Data IN endpoint configuration table. */
+                                        USB_Endpoint_Table_t DataOUTEndpoint; /**< Data OUT endpoint configuration table. */
+
+                                        char* IEEE1284String; /**< IEEE 1284 identification string, sent to the host during enumeration
+                                                               *   to identify the printer model, manufacturer and other characteristics.
+                                                               */
+                                } Config; /**< Config data for the USB class interface within the device. All elements in this section
+                                           *   <b>must</b> be set or the interface will fail to enumerate and operate correctly.
+                                           */
+                                struct
+                                {
+                                        uint8_t PortStatus; /**< Current status of the Printer virtual port, a collection of \c PRNT_PORTSTATUS_*
+                                                             *   bitmask values.
+                                                             */
+
+                                        volatile bool IsPrinterReset; /**< Flag indicating that the host has requested that the Printer interface be reset
+                                                                                               *   and that all current Mass Storage operations should immediately abort.
+                                                                                               */
+                                } State; /**< State data for the USB class interface within the device. All elements in this section
+                                          *   are reset to their defaults when the interface is enumerated.
+                                          */
+                        } USB_ClassInfo_PRNT_Device_t;
+
+                /* Function Prototypes: */
+                        /** Configures the endpoints of a given Printer interface, ready for use. This should be linked to the library
+                         *  \ref EVENT_USB_Device_ConfigurationChanged() event so that the endpoints are configured when the configuration containing
+                         *  the given Printer interface is selected.
+                         *
+                         *  \param[in,out] PRNTInterfaceInfo  Pointer to a structure containing a Printer Class configuration and state.
+                         *
+                         *  \return Boolean \c true if the endpoints were successfully configured, \c false otherwise.
+                         */
+                        bool PRNT_Device_ConfigureEndpoints(USB_ClassInfo_PRNT_Device_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+
+                        /** Processes incoming control requests from the host, that are directed to the given Printer class interface. This should be
+                         *  linked to the library \ref EVENT_USB_Device_ControlRequest() event.
+                         *
+                         *  \param[in,out] PRNTInterfaceInfo  Pointer to a structure containing a Printer Class configuration and state.
+                         */
+                        void PRNT_Device_ProcessControlRequest(USB_ClassInfo_PRNT_Device_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+
+                        /** General management task for a given Printer class interface, required for the correct operation of the interface. This should
+                         *  be called frequently in the main program loop, before the master USB management task \ref USB_USBTask().
+                         *
+                         *  \param[in,out] PRNTInterfaceInfo  Pointer to a structure containing a Printer Class configuration and state.
+                         */
+                        void PRNT_Device_USBTask(USB_ClassInfo_PRNT_Device_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+
+                        /** Printer class driver event for a soft reset request on a Printer interface. This event fires each time the host
+                         *  requests a reset of the printer interface's internal state, and may be hooked in the user program by declaring a
+                         *  handler function with the same name and parameters listed here.
+                         *
+                         *  \param[in,out] PRNTInterfaceInfo  Pointer to a structure containing a Printer Class configuration and state.
+                         */
+                        void EVENT_PRNT_Device_SoftReset(USB_ClassInfo_PRNT_Device_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+
+                        /** Sends a given data buffer to the attached USB host, if connected. If a host is not connected when the function is
+                         *  called, the string is discarded. Bytes will be queued for transmission to the host until either the endpoint bank
+                         *  becomes full, or the \ref PRNT_Device_Flush() function is called to flush the pending data to the host. This allows
+                         *  for multiple bytes to be packed into a single endpoint packet, increasing data throughput.
+                         *
+                         *  \pre This function must only be called when the Device state machine is in the \ref DEVICE_STATE_Configured state or
+                         *       the call will fail.
+                         *
+                         *  \param[in,out] PRNTInterfaceInfo  Pointer to a structure containing a Printer Class configuration and state.
+                         *  \param[in]     Buffer            Pointer to a buffer containing the data to send to the device.
+                         *  \param[in]     Length            Length of the data to send to the host.
+                         *
+                         *  \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+                         */
+                        uint8_t PRNT_Device_SendData(USB_ClassInfo_PRNT_Device_t* const PRNTInterfaceInfo,
+                                                     const void* const Buffer,
+                                                     const uint16_t Length) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
+
+                        /** Sends a given null terminated string to the attached USB host, if connected. If a host is not connected when
+                         *  the function is called, the string is discarded. Bytes will be queued for transmission to the host until either
+                         *  the endpoint bank becomes full, or the \ref PRNT_Device_Flush() function is called to flush the pending data to
+                         *  the host. This allows for multiple bytes to be packed into a single endpoint packet, increasing data throughput.
+                         *
+                         *  \pre This function must only be called when the Device state machine is in the \ref DEVICE_STATE_Configured state or
+                         *       the call will fail.
+                         *
+                         *  \param[in,out] PRNTInterfaceInfo  Pointer to a structure containing a Printer Class configuration and state.
+                         *  \param[in]     String            Pointer to the null terminated string to send to the host.
+                         *
+                         *  \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+                         */
+                        uint8_t PRNT_Device_SendString(USB_ClassInfo_PRNT_Device_t* const PRNTInterfaceInfo,
+                                                       const char* const String) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
+
+                        /** Sends a given byte to the attached USB host, if connected. If a host is not connected when the function is called, the
+                         *  byte is discarded. Bytes will be queued for transmission to the host until either the endpoint bank becomes full, or the
+                         *  \ref PRNT_Device_Flush() function is called to flush the pending data to the host. This allows for multiple bytes to be
+                         *  packed into a single endpoint packet, increasing data throughput.
+                         *
+                         *  \pre This function must only be called when the Device state machine is in the \ref DEVICE_STATE_Configured state or
+                         *       the call will fail.
+                         *
+                         *  \param[in,out] PRNTInterfaceInfo  Pointer to a structure containing a Printer Class configuration and state.
+                         *  \param[in]     Data              Byte of data to send to the host.
+                         *
+                         *  \return A value from the \ref Endpoint_WaitUntilReady_ErrorCodes_t enum.
+                         */
+                        uint8_t PRNT_Device_SendByte(USB_ClassInfo_PRNT_Device_t* const PRNTInterfaceInfo,
+                                                     const uint8_t Data) ATTR_NON_NULL_PTR_ARG(1);
+
+                        /** Determines the number of bytes received by the Printer interface from the host, waiting to be read. This indicates the number
+                         *  of bytes in the OUT endpoint bank only, and thus the number of calls to \ref PRNT_Device_ReceiveByte() which are guaranteed to
+                         *  succeed immediately. If multiple bytes are to be received, they should be buffered by the user application, as the endpoint
+                         *  bank will not be released back to the USB controller until all bytes are read.
+                         *
+                         *  \pre This function must only be called when the Device state machine is in the \ref DEVICE_STATE_Configured state or
+                         *       the call will fail.
+                         *
+                         *  \param[in,out] PRNTInterfaceInfo  Pointer to a structure containing a Printer Class configuration and state.
+                         *
+                         *  \return Total number of buffered bytes received from the host.
+                         */
+                        uint16_t PRNT_Device_BytesReceived(USB_ClassInfo_PRNT_Device_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+
+                        /** Reads a byte of data from the host. If no data is waiting to be read of if a USB host is not connected, the function
+                         *  returns a negative value. The \ref PRNT_Device_BytesReceived() function may be queried in advance to determine how many
+                         *  bytes are currently buffered in the Printer interface's data receive endpoint bank, and thus how many repeated calls to this
+                         *  function which are guaranteed to succeed.
+                         *
+                         *  \pre This function must only be called when the Device state machine is in the \ref DEVICE_STATE_Configured state or
+                         *       the call will fail.
+                         *
+                         *  \param[in,out] PRNTInterfaceInfo  Pointer to a structure containing a Printer Class configuration and state.
+                         *
+                         *  \return Next received byte from the host, or a negative value if no data received.
+                         */
+                        int16_t PRNT_Device_ReceiveByte(USB_ClassInfo_PRNT_Device_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+
+                        /** Flushes any data waiting to be sent, ensuring that the send buffer is cleared.
+                         *
+                         *  \pre This function must only be called when the Device state machine is in the \ref DEVICE_STATE_Configured state or
+                         *       the call will fail.
+                         *
+                         *  \param[in,out] PRNTInterfaceInfo  Pointer to a structure containing a Printer Class configuration and state.
+                         *
+                         *  \return A value from the \ref Endpoint_WaitUntilReady_ErrorCodes_t enum.
+                         */
+                        uint8_t PRNT_Device_Flush(USB_ClassInfo_PRNT_Device_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+
+                        #if defined(FDEV_SETUP_STREAM) || defined(__DOXYGEN__)
+                        /** Creates a standard character stream for the given Printer Device instance so that it can be used with all the regular
+                         *  functions in the standard <stdio.h> library that accept a \c FILE stream as a destination (e.g. \c fprintf()). The created
+                         *  stream is bidirectional and can be used for both input and output functions.
+                         *
+                         *  Reading data from this stream is non-blocking, i.e. in most instances, complete strings cannot be read in by a single
+                         *  fetch, as the endpoint will not be ready at some point in the transmission, aborting the transfer. However, this may
+                         *  be used when the read data is processed byte-per-bye (via \c getc()) or when the user application will implement its own
+                         *  line buffering.
+                         *
+                         *  \note The created stream can be given as \c stdout if desired to direct the standard output from all \c <stdio.h> functions
+                         *        to the given Printer interface.
+                         *        \n\n
+                         *
+                         *  \note This function is not available on all microcontroller architectures.
+                         *
+                         *  \param[in,out] PRNTInterfaceInfo  Pointer to a structure containing a Printer Class configuration and state.
+                         *  \param[in,out] Stream            Pointer to a FILE structure where the created stream should be placed.
+                         */
+                        void PRNT_Device_CreateStream(USB_ClassInfo_PRNT_Device_t* const PRNTInterfaceInfo,
+                                                      FILE* const Stream) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
+
+                        /** Identical to \ref PRNT_Device_CreateStream(), except that reads are blocking until the calling stream function terminates
+                         *  the transfer. While blocking, the USB and Printer service tasks are called repeatedly to maintain USB communications.
+                         *
+                         *  \note This function is not available on all microcontroller architectures.
+                         *
+                         *  \param[in,out] PRNTInterfaceInfo  Pointer to a structure containing a Printer Class configuration and state.
+                         *  \param[in,out] Stream            Pointer to a FILE structure where the created stream should be placed.
+                         */
+                        void PRNT_Device_CreateBlockingStream(USB_ClassInfo_PRNT_Device_t* const PRNTInterfaceInfo,
+                                                              FILE* const Stream) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
+                        #endif
+
+        /* Private Interface - For use in library only: */
+        #if !defined(__DOXYGEN__)
+                /* Function Prototypes: */
+                        #if defined(__INCLUDE_FROM_PRINTER_DEVICE_C)
+                                #if defined(FDEV_SETUP_STREAM)
+                                static int PRNT_Device_putchar(char c,
+                                                               FILE* Stream) ATTR_NON_NULL_PTR_ARG(2);
+                                static int PRNT_Device_getchar(FILE* Stream) ATTR_NON_NULL_PTR_ARG(1);
+                                static int PRNT_Device_getchar_Blocking(FILE* Stream) ATTR_NON_NULL_PTR_ARG(1);
+                                #endif
+
+                                void PRNT_Device_Event_Stub(void) ATTR_CONST;
+
+                                void EVENT_PRNT_Device_SoftReset(USB_ClassInfo_PRNT_Device_t* const PRNTInterfaceInfo)
+                                                                 ATTR_WEAK ATTR_NON_NULL_PTR_ARG(1) ATTR_ALIAS(PRNT_Device_Event_Stub);
+
+                        #endif
+
+        #endif
+
+        /* Disable C linkage for C++ Compilers: */
+                #if defined(__cplusplus)
+                        }
+                #endif
+
+#endif
+
+/** @} */
+