1 files changed, 3 insertions, 3 deletions
diff --git a/keyboards/ploopyco/trackball_nano/readme.md b/keyboards/ploopyco/trackball_nano/readme.md
index 8a293602a..a82b3bc71 100644
--- a/keyboards/ploopyco/trackball_nano/readme.md
+++ b/keyboards/ploopyco/trackball_nano/readme.md
@@ -2,7 +2,7 @@
 # Ploopy Trackball Nano
-![Ploopyco Trackball Nano](https://www.ploopy.co/uploads/b/113cb4122f867acc306a72a2741c5237a9b1d0db13abfe4e8e394cd466c4a311/_MG_7710_1614037372.jpg)
+![Ploopyco Trackball Nano](https://ploopy.co/wp-content/uploads/2021/06/2.jpg)
 It's a DIY, QMK Powered Trackball...Nano!
@@ -28,7 +28,7 @@ Occasionally, new revisions of the PCB will be released. Every board comes with
 Match the firmware that you flash onto the board with the designator on the board.
-# Customzing your Ploopy Nano Trackball
+# Customizing your Ploopy Nano Trackball
 You can change the DPI/CPI or speed of the trackball by calling `adns_set_cpi` at any time. Additionally, there is a `DPI_CONFIG` macro that will cycle through an array of options for the DPI.  This is set to 375, 750, and 1375, but can be changed. 750 is the default. 
@@ -51,4 +51,4 @@ When flashing the bootloader, use the following fuse settings:
 |----------|-------------|
 | Low      | `0x5E`      |
 | High     | `0x99`      |
-| Extended | `0xC3`      |
-\ No newline at end of file
+| Extended | `0xC3`      |

diff --git a/keyboards/ploopyco/trackball_nano/readme.md b/keyboards/ploopyco/trackball_nano/readme.md index 8a293602a..a82b3bc71 100644 --- a/keyboards/ploopyco/trackball_nano/readme.md +++ b/keyboards/ploopyco/trackball_nano/readme.md
@@ -2,7 +2,7 @@
2		2
3	# Ploopy Trackball Nano	3	# Ploopy Trackball Nano
4		4
5	![Ploopyco Trackball Nano](https://www.ploopy.co/uploads/b/113cb4122f867acc306a72a2741c5237a9b1d0db13abfe4e8e394cd466c4a311/_MG_7710_1614037372.jpg)	5	![Ploopyco Trackball Nano](https://ploopy.co/wp-content/uploads/2021/06/2.jpg)
6		6
7	It's a DIY, QMK Powered Trackball...Nano!	7	It's a DIY, QMK Powered Trackball...Nano!
8		8
@@ -28,7 +28,7 @@ Occasionally, new revisions of the PCB will be released. Every board comes with
28		28
29	Match the firmware that you flash onto the board with the designator on the board.	29	Match the firmware that you flash onto the board with the designator on the board.
30		30
31	# Customzing your Ploopy Nano Trackball	31	# Customizing your Ploopy Nano Trackball
32		32
33	You can change the DPI/CPI or speed of the trackball by calling `adns_set_cpi` at any time. Additionally, there is a `DPI_CONFIG` macro that will cycle through an array of options for the DPI. This is set to 375, 750, and 1375, but can be changed. 750 is the default.	33	You can change the DPI/CPI or speed of the trackball by calling `adns_set_cpi` at any time. Additionally, there is a `DPI_CONFIG` macro that will cycle through an array of options for the DPI. This is set to 375, 750, and 1375, but can be changed. 750 is the default.
34		34
@@ -51,4 +51,4 @@ When flashing the bootloader, use the following fuse settings:
51	\|----------\|-------------\|	51	\|----------\|-------------\|
52	\| Low \| `0x5E` \|	52	\| Low \| `0x5E` \|
53	\| High \| `0x99` \|	53	\| High \| `0x99` \|
54	\| Extended \| `0xC3` \| \ No newline at end of file	54	\| Extended \| `0xC3` \|