1 files changed, 14 insertions, 0 deletions
diff --git a/keyboards/gmmk/pro/readme.md b/keyboards/gmmk/pro/readme.md
index 2307a525c..e291179c9 100644
--- a/keyboards/gmmk/pro/readme.md
+++ b/keyboards/gmmk/pro/readme.md
@@ -21,3 +21,17 @@ To reset the board into bootloader mode, do one of the following:
 * Fn+Backslash will reset the board to bootloader mode if you have flashed the default QMK keymap
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+## Case Screw Replacements
+Many users report stripped case screws when disassembling the board.
+The stock case screws are:
+* Thread: M2
+* Thread length: ~5 mm
+* Head diameter: ~3.8 mm
+* Head counterbore diameter: ~4.0 mm
+* Head counterbore depth: ~1.9 mm
+Most M2x5mm screws should fit fine, although it's best to ensure that the screw head will fit inside the counterbore.
+For reference, [this hex socket head screw](https://www.mcmaster.com/91292A005/) from McMaster-Carr should fit nearly flush (head will protrude above the counterbore by ~0.1 mm).

diff --git a/keyboards/gmmk/pro/readme.md b/keyboards/gmmk/pro/readme.md index 2307a525c..e291179c9 100644 --- a/keyboards/gmmk/pro/readme.md +++ b/keyboards/gmmk/pro/readme.md
@@ -21,3 +21,17 @@ To reset the board into bootloader mode, do one of the following:
21	* Fn+Backslash will reset the board to bootloader mode if you have flashed the default QMK keymap	21	* Fn+Backslash will reset the board to bootloader mode if you have flashed the default QMK keymap
22		22
23	See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).	23	See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
		24
		25	## Case Screw Replacements
		26
		27	Many users report stripped case screws when disassembling the board.
		28
		29	The stock case screws are:
		30	* Thread: M2
		31	* Thread length: ~5 mm
		32	* Head diameter: ~3.8 mm
		33	* Head counterbore diameter: ~4.0 mm
		34	* Head counterbore depth: ~1.9 mm
		35
		36	Most M2x5mm screws should fit fine, although it's best to ensure that the screw head will fit inside the counterbore.
		37	For reference, [this hex socket head screw](https://www.mcmaster.com/91292A005/) from McMaster-Carr should fit nearly flush (head will protrude above the counterbore by ~0.1 mm).