1 files changed, 4 insertions, 3 deletions

diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md
index 41d0bca37..fa06e46e4 100644
--- a/docs/feature_rgb_matrix.md
+++ b/docs/feature_rgb_matrix.md
@@ -49,6 +49,8 @@ Here is an example using 2 drivers.
 
 !> Note the parentheses, this is so when `DRIVER_LED_TOTAL` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)` will give very different results than `rand() % DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL`.
 
+For split keyboards using `RGB_MATRIX_SPLIT` with an LED driver, you can either have the same driver address or different driver addresses. If using different addresses, use `DRIVER_ADDR_1` for one and `DRIVER_ADDR_2` for the other one. Then, in `g_is31_leds`, fill out the correct driver index (0 or 1). If using one address, use `DRIVER_ADDR_1` for both, and use index 0 for `g_is31_leds`.
+
 Define these arrays listing all the LEDs in your `<keyboard>.c`:
 
 ```c
@@ -540,7 +542,7 @@ static bool my_cool_effect(effect_params_t* params) {
   for (uint8_t i = led_min; i < led_max; i++) {
     rgb_matrix_set_color(i, 0xff, 0xff, 0x00);
   }
-  return led_max < DRIVER_LED_TOTAL;
+  return rgb_matrix_check_finished_leds(led_max);
 }
 
 // e.g: A more complex effect, relying on external methods and state, with
@@ -554,8 +556,7 @@ static bool my_cool_effect2_complex_run(effect_params_t* params) {
   for (uint8_t i = led_min; i < led_max; i++) {
     rgb_matrix_set_color(i, 0xff, some_global_state++, 0xff);
   }
-
-  return led_max < DRIVER_LED_TOTAL;
+  return rgb_matrix_check_finished_leds(led_max);
 }
 static bool my_cool_effect2(effect_params_t* params) {
   if (params->init) my_cool_effect2_complex_init(params);