1 files changed, 20 insertions, 15 deletions

diff --git a/docs/getting_started_build_tools.md b/docs/getting_started_build_tools.md
index c1e02d4e0..375e9d108 100644
--- a/docs/getting_started_build_tools.md
+++ b/docs/getting_started_build_tools.md
@@ -8,7 +8,7 @@ Note: If it is your first time here, Check out the "Complete Newbs guide" instea
 
 ## Linux
 
-To ensure you are always up to date, you can just run `sudo util/install_dependencies.sh`. That should always install all the dependencies needed. **This will run `apt-get upgrade`.**
+To ensure you are always up to date, you can just run `sudo util/qmk_install.sh`. That should always install all the dependencies needed. **This will run `apt-get upgrade`.**
 
 You can also install things manually, but this documentation might not be always up to date with all requirements.
 
@@ -57,11 +57,13 @@ If you're using [homebrew,](http://brew.sh/) you can use the following commands:
     brew tap PX4/homebrew-px4
     brew update
     brew install avr-gcc@7
+    brew link --force avr-gcc@7
     brew install dfu-programmer
+    brew install dfu-util
     brew install gcc-arm-none-eabi
     brew install avrdude
 
-This is the recommended method. If you don't have homebrew, [install it!](http://brew.sh/) It's very much worth it for anyone who works in the command line. Note that the `make` and `make install` portion during the homebrew installation of avr-libc can take over 20 minutes and exhibit high CPU usage.
+This is the recommended method. If you don't have homebrew, [install it!](http://brew.sh/) It's very much worth it for anyone who works in the command line. Note that the `make` and `make install` portion during the homebrew installation of `avr-gcc@7` can take over 20 minutes and exhibit high CPU usage.
 
 ## Windows with msys2 (recommended)
 
@@ -69,9 +71,9 @@ The best environment to use, for Windows Vista through any later version (tested
 
 * Install msys2 by downloading it and following the instructions here: http://www.msys2.org
 * Open the ``MSYS2 MingGW 64-bit`` shortcut
-* Navigate to your qmk checkout. For example, if it's in the root of your c drive:
+* Navigate to your QMK repository. For example, if it's in the root of your c drive:
  * `$ cd /c/qmk_firmware`
-* Run `util/msys2_install.sh` and follow the prompts
+* Run `util/qmk_install.sh` and follow the prompts
 
 ## Windows 10 (deprecated)
 These are the old instructions for Windows 10. We recommend you use [MSYS2 as outlined above](#windows-with-msys2-recommended).
@@ -121,24 +123,27 @@ If you have trouble and want to ask for help, it is useful to generate a *Win_Ch
 
 ## Docker
 
-If this is a bit complex for you, Docker might be the turn-key solution you need. After installing [Docker](https://www.docker.com/products/docker), run the following command at the root of the QMK folder to build a keyboard/keymap:
-
+If this is a bit complex for you, Docker might be the turn-key solution you need. After installing [Docker CE](https://docs.docker.com/install/#supported-platforms), run the following command from the `qmk_firmware` directory to build a keyboard/keymap:
 ```bash
-# You'll run this every time you want to build a keymap
-# modify the keymap and keyboard assignment to compile what you want
-# defaults are ergodox/default
-
-docker run -e keymap=gwen -e keyboard=ergodox_ez --rm -v $('pwd'):/qmk:rw edasque/qmk_firmware
+util/docker_build.sh keyboard:keymap 
+# For example: util/docker_build.sh ergodox_ez:steno
 ```
+This will compile the targeted keyboard/keymap and leave the resulting `.hex` or `.bin` file in the QMK directory for you to flash. If `:keymap` is omitted, the `default` keymap is used. Note that the parameter format is the same as when building with `make`.
 
-On Windows Docker seems to have issues with the VOLUME tag in Dockerfile, and `$('pwd')` won't print a Windows compliant path; use full path instead, like this:
-
+You can also start the script without any parameters, in which case it will ask you to input the build parameters one by one, which you may find easier to use:
 ```bash
-docker run -e keymap=default -e keyboard=ergodox_ez --rm -v D:/Users/Sacapuces/Documents/Repositories/qmk:/qmk:rw edasque/qmk_firmware
+util/docker_build.sh
+# Reads parameters as input (leave blank for defaults)
+```
 
+There is also support for building _and_ flashing the keyboard straight from Docker by specifying the `target` as well:
+```bash
+util/docker_build.sh keyboard:keymap:target
+# For example: util/docker_build.sh planck/rev6:default:dfu-util
 ```
+If you're on Linux, this should work out of the box. On Windows and macOS, it requires [Docker Machine](http://gw.tnode.com/docker/docker-machine-with-usb-support-on-windows-macos/) to be running. This is tedious to set up, so it's not recommended; use QMK Toolbox instead.
 
-This will compile the targeted keyboard/keymap and leave it in your QMK directory for you to flash.
+!> Docker for Windows requires [Hyper-V](https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/quick-start/enable-hyper-v) to be enabled. This means that it cannot work on versions of Windows which don't have Hyper-V, such as Windows 7, Windows 8 and **Windows 10 Home**.
 
 ## Vagrant
 If you have any problems building the firmware, you can try using a tool called Vagrant. It will set up a virtual computer with a known configuration that's ready-to-go for firmware building. OLKB does NOT host the files for this virtual computer. Details on how to set up Vagrant are in the [vagrant guide](getting_started_vagrant.md).