4 files changed, 6 insertions, 6 deletions

diff --git a/drivers/avr/serial.c b/drivers/avr/serial.c
index 526a0946b..3647bee0d 100644
--- a/drivers/avr/serial.c
+++ b/drivers/avr/serial.c
@@ -20,7 +20,7 @@
 
 #ifdef SOFT_SERIAL_PIN
 
-#    if !(defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__))
+#    if !(defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB162__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__))
 #        error serial.c is not supported for the currently selected MCU
 #    endif
 // if using ATmega32U4/2, AT90USBxxx I2C, can not use PD0 and PD1 in soft serial.
@@ -52,8 +52,8 @@
 #        define EICRx EICRA
 #    endif
 
-// ATmegaxxU2 specific config
-#    if defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__)
+// ATmegaxxU2/AT90USB162 specific config
+#    if defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_AT90USB162__)
 // PD4(INT5), PD6(INT6), PD7(INT7), PC7(INT4)
 #        if SOFT_SERIAL_PIN == D4
 #            define EIMSK_BIT _BV(INT5)
diff --git a/drivers/avr/spi_master.c b/drivers/avr/spi_master.c
index cbec9f36e..19ca0ced4 100644
--- a/drivers/avr/spi_master.c
+++ b/drivers/avr/spi_master.c
@@ -20,7 +20,7 @@
 #include "quantum.h"
 #include "timer.h"
 
-#if defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__)
+#if defined(__AVR_AT90USB162__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__)
 #    define SPI_SCK_PIN B1
 #    define SPI_MOSI_PIN B2
 #    define SPI_MISO_PIN B3
diff --git a/drivers/avr/spi_master.h b/drivers/avr/spi_master.h
index e36a7c21c..9203698dd 100644
--- a/drivers/avr/spi_master.h
+++ b/drivers/avr/spi_master.h
@@ -21,7 +21,7 @@
 typedef int16_t spi_status_t;
 
 // Hardware SS pin is defined in the header so that user code can refer to it
-#if defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__)
+#if defined(__AVR_AT90USB162__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__)
 #    define SPI_SS_PIN B0
 #elif defined(__AVR_ATmega32A__)
 #    define SPI_SS_PIN B4
diff --git a/drivers/avr/uart.c b/drivers/avr/uart.c
index e866a9e4f..c6abcb6fe 100644
--- a/drivers/avr/uart.c
+++ b/drivers/avr/uart.c
@@ -29,7 +29,7 @@
 
 #include "uart.h"
 
-#if defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__)
+#if defined(__AVR_AT90USB162__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__)
 #    define UDRn UDR1
 #    define UBRRnL UBRR1L
 #    define UCSRnA UCSR1A