1 files changed, 13 insertions, 9 deletions
diff --git a/keyboards/atreus/readme.md b/keyboards/atreus/readme.md
index 5cd797da9..0dbd098ca 100644
--- a/keyboards/atreus/readme.md
+++ b/keyboards/atreus/readme.md
@@ -1,5 +1,6 @@
-Atreus
+# Atreus
-======
+![Atreus](https://atreus.technomancy.us/photos/1.jpg)
 A small mechanical keyboard that is based around the shape of the human hand.
@@ -9,16 +10,19 @@ Hardware Availability: https://atreus.technomancy.us
 These configuration files are specifically for the Atreus keyboards created by Phil Hagelberg (@technomancy). This keyboard is available in two variants: one powered by a Teensy 2 (usually hand-wired), one powered by an A-Star (usually using a PCB). You will need to use different `make` commands depending on the variant you have; see examples below.
-A-Star:\
+Make example for this keyboard (after setting up your build environment):
-`make atreus:default:avrdude`
+    make atreus:default:avrdude
+If you would like to use one of the alternative controllers:
+    make atreus/astar:default:avrdude
+    make atreus/teensy2:default:teensy
-Teensy:\
-`make TEENSY2=yes atreus:default:teensy`
- 
 If your keyboard layout is a mirror image of what you expected (i.e. you do not get QWERTY on the left but YTREWQ on the right), then you have an A-Star powered Atreus (older than March 2016) with PCB labels facing *down* instead of up. Specify that by adding `PCBDOWN=yes` to your `make` commands, e.g.
-`make PCBDOWN=yes atreus:default:avrdude`
+    make PCBDOWN=yes atreus:default:avrdude
 *Unlike the TMK firmware, these commands should be run from the root of the repository, not the directory containing this readme.*
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools), then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

diff --git a/keyboards/atreus/readme.md b/keyboards/atreus/readme.md index 5cd797da9..0dbd098ca 100644 --- a/keyboards/atreus/readme.md +++ b/keyboards/atreus/readme.md
@@ -1,5 +1,6 @@
1	Atreus	1	# Atreus
2	======	2
		3	![Atreus](https://atreus.technomancy.us/photos/1.jpg)
3		4
4	A small mechanical keyboard that is based around the shape of the human hand.	5	A small mechanical keyboard that is based around the shape of the human hand.
5		6
@@ -9,16 +10,19 @@ Hardware Availability: https://atreus.technomancy.us
9		10
10	These configuration files are specifically for the Atreus keyboards created by Phil Hagelberg (@technomancy). This keyboard is available in two variants: one powered by a Teensy 2 (usually hand-wired), one powered by an A-Star (usually using a PCB). You will need to use different `make` commands depending on the variant you have; see examples below.	11	These configuration files are specifically for the Atreus keyboards created by Phil Hagelberg (@technomancy). This keyboard is available in two variants: one powered by a Teensy 2 (usually hand-wired), one powered by an A-Star (usually using a PCB). You will need to use different `make` commands depending on the variant you have; see examples below.
11		12
12	A-Star:\	13	Make example for this keyboard (after setting up your build environment):
13	`make atreus:default:avrdude`	14
		15	make atreus:default:avrdude
		16
		17	If you would like to use one of the alternative controllers:
		18
		19	make atreus/astar:default:avrdude
		20	make atreus/teensy2:default:teensy
14		21
15	Teensy:\
16	`make TEENSY2=yes atreus:default:teensy`
17
18	If your keyboard layout is a mirror image of what you expected (i.e. you do not get QWERTY on the left but YTREWQ on the right), then you have an A-Star powered Atreus (older than March 2016) with PCB labels facing down instead of up. Specify that by adding `PCBDOWN=yes` to your `make` commands, e.g.	22	If your keyboard layout is a mirror image of what you expected (i.e. you do not get QWERTY on the left but YTREWQ on the right), then you have an A-Star powered Atreus (older than March 2016) with PCB labels facing down instead of up. Specify that by adding `PCBDOWN=yes` to your `make` commands, e.g.
19		23
20	`make PCBDOWN=yes atreus:default:avrdude`	24	make PCBDOWN=yes atreus:default:avrdude
21		25
22	Unlike the TMK firmware, these commands should be run from the root of the repository, not the directory containing this readme.	26	Unlike the TMK firmware, these commands should be run from the root of the repository, not the directory containing this readme.
23		27
24	See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools), then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.	28	See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).