aboutsummaryrefslogtreecommitdiff
path: root/keyboards/gh60/keymaps/robotmaxtron
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/gh60/keymaps/robotmaxtron')
-rw-r--r--keyboards/gh60/keymaps/robotmaxtron/Makefile224
-rw-r--r--keyboards/gh60/keymaps/robotmaxtron/config.h380
2 files changed, 302 insertions, 302 deletions
diff --git a/keyboards/gh60/keymaps/robotmaxtron/Makefile b/keyboards/gh60/keymaps/robotmaxtron/Makefile
index 2e69aee29..c73cf1141 100644
--- a/keyboards/gh60/keymaps/robotmaxtron/Makefile
+++ b/keyboards/gh60/keymaps/robotmaxtron/Makefile
@@ -1,112 +1,112 @@
1#---------------------------------------------------------------------------- 1#----------------------------------------------------------------------------
2# On command line: 2# On command line:
3# 3#
4# make all = Make software. 4# make all = Make software.
5# 5#
6# make clean = Clean out built project files. 6# make clean = Clean out built project files.
7# 7#
8# make coff = Convert ELF to AVR COFF. 8# make coff = Convert ELF to AVR COFF.
9# 9#
10# make extcoff = Convert ELF to AVR Extended COFF. 10# make extcoff = Convert ELF to AVR Extended COFF.
11# 11#
12# make program = Download the hex file to the device. 12# make program = Download the hex file to the device.
13# Please customize your programmer settings(PROGRAM_CMD) 13# Please customize your programmer settings(PROGRAM_CMD)
14# 14#
15# make teensy = Download the hex file to the device, using teensy_loader_cli. 15# make teensy = Download the hex file to the device, using teensy_loader_cli.
16# (must have teensy_loader_cli installed). 16# (must have teensy_loader_cli installed).
17# 17#
18# make dfu = Download the hex file to the device, using dfu-programmer (must 18# make dfu = Download the hex file to the device, using dfu-programmer (must
19# have dfu-programmer installed). 19# have dfu-programmer installed).
20# 20#
21# make flip = Download the hex file to the device, using Atmel FLIP (must 21# make flip = Download the hex file to the device, using Atmel FLIP (must
22# have Atmel FLIP installed). 22# have Atmel FLIP installed).
23# 23#
24# make dfu-ee = Download the eeprom file to the device, using dfu-programmer 24# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
25# (must have dfu-programmer installed). 25# (must have dfu-programmer installed).
26# 26#
27# make flip-ee = Download the eeprom file to the device, using Atmel FLIP 27# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
28# (must have Atmel FLIP installed). 28# (must have Atmel FLIP installed).
29# 29#
30# make debug = Start either simulavr or avarice as specified for debugging, 30# make debug = Start either simulavr or avarice as specified for debugging,
31# with avr-gdb or avr-insight as the front end for debugging. 31# with avr-gdb or avr-insight as the front end for debugging.
32# 32#
33# make filename.s = Just compile filename.c into the assembler code only. 33# make filename.s = Just compile filename.c into the assembler code only.
34# 34#
35# make filename.i = Create a preprocessed source file for use in submitting 35# make filename.i = Create a preprocessed source file for use in submitting
36# bug reports to the GCC project. 36# bug reports to the GCC project.
37# 37#
38# To rebuild project do "make clean" then "make all". 38# To rebuild project do "make clean" then "make all".
39#---------------------------------------------------------------------------- 39#----------------------------------------------------------------------------
40 40
41# MCU name 41# MCU name
42#MCU = at90usb1287 42#MCU = at90usb1287
43MCU = atmega32u4 43MCU = atmega32u4
44 44
45# Processor frequency. 45# Processor frequency.
46# This will define a symbol, F_CPU, in all source code files equal to the 46# This will define a symbol, F_CPU, in all source code files equal to the
47# processor frequency in Hz. You can then use this symbol in your source code to 47# processor frequency in Hz. You can then use this symbol in your source code to
48# calculate timings. Do NOT tack on a 'UL' at the end, this will be done 48# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
49# automatically to create a 32-bit value in your source code. 49# automatically to create a 32-bit value in your source code.
50# 50#
51# This will be an integer division of F_USB below, as it is sourced by 51# This will be an integer division of F_USB below, as it is sourced by
52# F_USB after it has run through any CPU prescalers. Note that this value 52# F_USB after it has run through any CPU prescalers. Note that this value
53# does not *change* the processor frequency - it should merely be updated to 53# does not *change* the processor frequency - it should merely be updated to
54# reflect the processor speed set externally so that the code can use accurate 54# reflect the processor speed set externally so that the code can use accurate
55# software delays. 55# software delays.
56F_CPU = 16000000 56F_CPU = 16000000
57 57
58 58
59# 59#
60# LUFA specific 60# LUFA specific
61# 61#
62# Target architecture (see library "Board Types" documentation). 62# Target architecture (see library "Board Types" documentation).
63ARCH = AVR8 63ARCH = AVR8
64 64
65# Input clock frequency. 65# Input clock frequency.
66# This will define a symbol, F_USB, in all source code files equal to the 66# This will define a symbol, F_USB, in all source code files equal to the
67# input clock frequency (before any prescaling is performed) in Hz. This value may 67# input clock frequency (before any prescaling is performed) in Hz. This value may
68# differ from F_CPU if prescaling is used on the latter, and is required as the 68# differ from F_CPU if prescaling is used on the latter, and is required as the
69# raw input clock is fed directly to the PLL sections of the AVR for high speed 69# raw input clock is fed directly to the PLL sections of the AVR for high speed
70# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' 70# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
71# at the end, this will be done automatically to create a 32-bit value in your 71# at the end, this will be done automatically to create a 32-bit value in your
72# source code. 72# source code.
73# 73#
74# If no clock division is performed on the input clock inside the AVR (via the 74# If no clock division is performed on the input clock inside the AVR (via the
75# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. 75# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
76F_USB = $(F_CPU) 76F_USB = $(F_CPU)
77 77
78# Interrupt driven control endpoint task(+60) 78# Interrupt driven control endpoint task(+60)
79OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT 79OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
80 80
81 81
82# Boot Section Size in *bytes* 82# Boot Section Size in *bytes*
83# Teensy halfKay 512 83# Teensy halfKay 512
84# Teensy++ halfKay 1024 84# Teensy++ halfKay 1024
85# Atmel DFU loader 4096 85# Atmel DFU loader 4096
86# LUFA bootloader 4096 86# LUFA bootloader 4096
87# USBaspLoader 2048 87# USBaspLoader 2048
88OPT_DEFS += -DBOOTLOADER_SIZE=4096 88OPT_DEFS += -DBOOTLOADER_SIZE=4096
89 89
90 90
91# Build Options 91# Build Options
92# comment out to disable the options. 92# comment out to disable the options.
93# 93#
94BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) 94BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
95MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) 95MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
96EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) 96EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
97# CONSOLE_ENABLE ?= yes # Console for debug(+400) 97# CONSOLE_ENABLE ?= yes # Console for debug(+400)
98# COMMAND_ENABLE ?= yes # Commands for debug and configuration 98# COMMAND_ENABLE ?= yes # Commands for debug and configuration
99KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key 99KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key
100# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE 100# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
101# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend 101# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
102NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work 102NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
103# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality 103# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
104# MIDI_ENABLE ?= YES # MIDI controls 104# MIDI_ENABLE ?= YES # MIDI controls
105# UNICODE_ENABLE ?= YES # Unicode 105# UNICODE_ENABLE ?= YES # Unicode
106# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID 106# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
107RGBLIGHT_ENABLE ?= yes # Enable RGB Underglow 107RGBLIGHT_ENABLE ?= yes # Enable RGB Underglow
108 108
109ifndef QUANTUM_DIR 109ifndef QUANTUM_DIR
110 include ../../../../Makefile 110 include ../../../../Makefile
111endif 111endif
112 112
diff --git a/keyboards/gh60/keymaps/robotmaxtron/config.h b/keyboards/gh60/keymaps/robotmaxtron/config.h
index 8272875ed..6a29e6b8c 100644
--- a/keyboards/gh60/keymaps/robotmaxtron/config.h
+++ b/keyboards/gh60/keymaps/robotmaxtron/config.h
@@ -1,190 +1,190 @@
1/* 1/*
2Copyright 2012 Jun Wako <wakojun@gmail.com> 2Copyright 2012 Jun Wako <wakojun@gmail.com>
3 3
4This program is free software: you can redistribute it and/or modify 4This program is free software: you can redistribute it and/or modify
5it under the terms of the GNU General Public License as published by 5it under the terms of the GNU General Public License as published by
6the Free Software Foundation, either version 2 of the License, or 6the Free Software Foundation, either version 2 of the License, or
7(at your option) any later version. 7(at your option) any later version.
8 8
9This program is distributed in the hope that it will be useful, 9This program is distributed in the hope that it will be useful,
10but WITHOUT ANY WARRANTY; without even the implied warranty of 10but WITHOUT ANY WARRANTY; without even the implied warranty of
11MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 11MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12GNU General Public License for more details. 12GNU General Public License for more details.
13 13
14You should have received a copy of the GNU General Public License 14You should have received a copy of the GNU General Public License
15along with this program. If not, see <http://www.gnu.org/licenses/>. 15along with this program. If not, see <http://www.gnu.org/licenses/>.
16*/ 16*/
17 17
18#ifndef CONFIG_H 18#ifndef CONFIG_H
19#define CONFIG_H 19#define CONFIG_H
20 20
21#include "config_common.h" 21#include "config_common.h"
22 22
23/* USB Device descriptor parameter */ 23/* USB Device descriptor parameter */
24#define VENDOR_ID 0xFEED 24#define VENDOR_ID 0xFEED
25#define PRODUCT_ID 0x6060 25#define PRODUCT_ID 0x6060
26#define DEVICE_VER 0x0001 26#define DEVICE_VER 0x0001
27#define MANUFACTURER geekhack 27#define MANUFACTURER geekhack
28#define PRODUCT GH60 28#define PRODUCT GH60
29#define DESCRIPTION t.m.k. keyboard firmware for GH60 29#define DESCRIPTION t.m.k. keyboard firmware for GH60
30 30
31/* key matrix size */ 31/* key matrix size */
32#define MATRIX_ROWS 5 32#define MATRIX_ROWS 5
33#define MATRIX_COLS 14 33#define MATRIX_COLS 14
34 34
35/* 35/*
36 * Keyboard Matrix Assignments 36 * Keyboard Matrix Assignments
37 * 37 *
38 * Change this to how you wired your keyboard 38 * Change this to how you wired your keyboard
39 * COLS: AVR pins used for columns, left to right 39 * COLS: AVR pins used for columns, left to right
40 * ROWS: AVR pins used for rows, top to bottom 40 * ROWS: AVR pins used for rows, top to bottom
41 * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) 41 * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
42 * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) 42 * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
43 * 43 *
44*/ 44*/
45 #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } 45 #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
46// Rev A 46// Rev A
47// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 } 47// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
48// Rev B/C 48// Rev B/C
49 #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 } 49 #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
50#define UNUSED_PINS 50#define UNUSED_PINS
51 51
52/* COL2ROW or ROW2COL */ 52/* COL2ROW or ROW2COL */
53#define DIODE_DIRECTION COL2ROW 53#define DIODE_DIRECTION COL2ROW
54 54
55/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ 55/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
56#define DEBOUNCING_DELAY 5 56#define DEBOUNCING_DELAY 5
57 57
58/* define if matrix has ghost (lacks anti-ghosting diodes) */ 58/* define if matrix has ghost (lacks anti-ghosting diodes) */
59//#define MATRIX_HAS_GHOST 59//#define MATRIX_HAS_GHOST
60 60
61/* number of backlight levels */ 61/* number of backlight levels */
62#define BACKLIGHT_LEVELS 3 62#define BACKLIGHT_LEVELS 3
63 63
64/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ 64/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
65#define LOCKING_SUPPORT_ENABLE 65#define LOCKING_SUPPORT_ENABLE
66/* Locking resynchronize hack */ 66/* Locking resynchronize hack */
67#define LOCKING_RESYNC_ENABLE 67#define LOCKING_RESYNC_ENABLE
68 68
69/* 69/*
70 * Force NKRO 70 * Force NKRO
71 * 71 *
72 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved 72 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
73 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the 73 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
74 * makefile for this to work.) 74 * makefile for this to work.)
75 * 75 *
76 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) 76 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
77 * until the next keyboard reset. 77 * until the next keyboard reset.
78 * 78 *
79 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is 79 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
80 * fully operational during normal computer usage. 80 * fully operational during normal computer usage.
81 * 81 *
82 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) 82 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
83 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by 83 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
84 * bootmagic, NKRO mode will always be enabled until it is toggled again during a 84 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
85 * power-up. 85 * power-up.
86 * 86 *
87 */ 87 */
88//#define FORCE_NKRO 88//#define FORCE_NKRO
89 89
90/* 90/*
91 * Magic Key Options 91 * Magic Key Options
92 * 92 *
93 * Magic keys are hotkey commands that allow control over firmware functions of 93 * Magic keys are hotkey commands that allow control over firmware functions of
94 * the keyboard. They are best used in combination with the HID Listen program, 94 * the keyboard. They are best used in combination with the HID Listen program,
95 * found here: https://www.pjrc.com/teensy/hid_listen.html 95 * found here: https://www.pjrc.com/teensy/hid_listen.html
96 * 96 *
97 * The options below allow the magic key functionality to be changed. This is 97 * The options below allow the magic key functionality to be changed. This is
98 * useful if your keyboard/keypad is missing keys and you want magic key support. 98 * useful if your keyboard/keypad is missing keys and you want magic key support.
99 * 99 *
100 */ 100 */
101 101
102/* key combination for magic key command */ 102/* key combination for magic key command */
103#define IS_COMMAND() ( \ 103#define IS_COMMAND() ( \
104 keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ 104 keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
105) 105)
106 106
107/* control how magic key switches layers */ 107/* control how magic key switches layers */
108//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true 108//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
109//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true 109//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
110//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false 110//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
111 111
112/* override magic key keymap */ 112/* override magic key keymap */
113//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS 113//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
114//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS 114//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
115//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM 115//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
116//#define MAGIC_KEY_HELP1 H 116//#define MAGIC_KEY_HELP1 H
117//#define MAGIC_KEY_HELP2 SLASH 117//#define MAGIC_KEY_HELP2 SLASH
118//#define MAGIC_KEY_DEBUG D 118//#define MAGIC_KEY_DEBUG D
119//#define MAGIC_KEY_DEBUG_MATRIX X 119//#define MAGIC_KEY_DEBUG_MATRIX X
120//#define MAGIC_KEY_DEBUG_KBD K 120//#define MAGIC_KEY_DEBUG_KBD K
121//#define MAGIC_KEY_DEBUG_MOUSE M 121//#define MAGIC_KEY_DEBUG_MOUSE M
122//#define MAGIC_KEY_VERSION V 122//#define MAGIC_KEY_VERSION V
123//#define MAGIC_KEY_STATUS S 123//#define MAGIC_KEY_STATUS S
124//#define MAGIC_KEY_CONSOLE C 124//#define MAGIC_KEY_CONSOLE C
125//#define MAGIC_KEY_LAYER0_ALT1 ESC 125//#define MAGIC_KEY_LAYER0_ALT1 ESC
126//#define MAGIC_KEY_LAYER0_ALT2 GRAVE 126//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
127//#define MAGIC_KEY_LAYER0 0 127//#define MAGIC_KEY_LAYER0 0
128//#define MAGIC_KEY_LAYER1 1 128//#define MAGIC_KEY_LAYER1 1
129//#define MAGIC_KEY_LAYER2 2 129//#define MAGIC_KEY_LAYER2 2
130//#define MAGIC_KEY_LAYER3 3 130//#define MAGIC_KEY_LAYER3 3
131//#define MAGIC_KEY_LAYER4 4 131//#define MAGIC_KEY_LAYER4 4
132//#define MAGIC_KEY_LAYER5 5 132//#define MAGIC_KEY_LAYER5 5
133//#define MAGIC_KEY_LAYER6 6 133//#define MAGIC_KEY_LAYER6 6
134//#define MAGIC_KEY_LAYER7 7 134//#define MAGIC_KEY_LAYER7 7
135//#define MAGIC_KEY_LAYER8 8 135//#define MAGIC_KEY_LAYER8 8
136//#define MAGIC_KEY_LAYER9 9 136//#define MAGIC_KEY_LAYER9 9
137//#define MAGIC_KEY_BOOTLOADER PAUSE 137//#define MAGIC_KEY_BOOTLOADER PAUSE
138//#define MAGIC_KEY_LOCK CAPS 138//#define MAGIC_KEY_LOCK CAPS
139//#define MAGIC_KEY_EEPROM E 139//#define MAGIC_KEY_EEPROM E
140//#define MAGIC_KEY_NKRO N 140//#define MAGIC_KEY_NKRO N
141//#define MAGIC_KEY_SLEEP_LED Z 141//#define MAGIC_KEY_SLEEP_LED Z
142 142
143/* 143/*
144 * Feature disable options 144 * Feature disable options
145 * These options are also useful to firmware size reduction. 145 * These options are also useful to firmware size reduction.
146 */ 146 */
147 147
148/* disable debug print */ 148/* disable debug print */
149//#define NO_DEBUG 149//#define NO_DEBUG
150 150
151/* disable print */ 151/* disable print */
152//#define NO_PRINT 152//#define NO_PRINT
153 153
154/* disable action features */ 154/* disable action features */
155//#define NO_ACTION_LAYER 155//#define NO_ACTION_LAYER
156//#define NO_ACTION_TAPPING 156//#define NO_ACTION_TAPPING
157//#define NO_ACTION_ONESHOT 157//#define NO_ACTION_ONESHOT
158//#define NO_ACTION_MACRO 158//#define NO_ACTION_MACRO
159//#define NO_ACTION_FUNCTION 159//#define NO_ACTION_FUNCTION
160 160
161/* 161/*
162 * RGB Underglow 162 * RGB Underglow
163 * These settings are for the F4 by default: 163 * These settings are for the F4 by default:
164 * 164 *
165 * 165 *
166 * #define ws2812_PORTREG PORTF 166 * #define ws2812_PORTREG PORTF
167 * #define ws2812_DDRREG DDRF 167 * #define ws2812_DDRREG DDRF
168 * #define ws2812_pin PF4 168 * #define ws2812_pin PF4
169 * #define RGBLED_NUM 14 // Number of LEDs 169 * #define RGBLED_NUM 14 // Number of LEDs
170 * #define RGBLIGHT_HUE_STEP 10 170 * #define RGBLIGHT_HUE_STEP 10
171 * #define RGBLIGHT_SAT_STEP 17 171 * #define RGBLIGHT_SAT_STEP 17
172 * #define RGBLIGHT_VAL_STEP 17 172 * #define RGBLIGHT_VAL_STEP 17
173 * 173 *
174 * The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects. 174 * The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects.
175 * To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations. 175 * To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations.
176 * For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c 176 * For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c
177*/ 177*/
178 178
179/* Deprecated code below 179/* Deprecated code below
180#define ws2812_PORTREG PORTF 180#define ws2812_PORTREG PORTF
181#define ws2812_DDRREG DDRF 181#define ws2812_DDRREG DDRF
182#define ws2812_pin PF4 182#define ws2812_pin PF4
183*/ 183*/
184#define RGB_DI_PIN F4 184#define RGB_DI_PIN F4
185#define RGBLIGHT_TIMER 185#define RGBLIGHT_TIMER
186#define RGBLED_NUM 8 // Number of LEDs 186#define RGBLED_NUM 8 // Number of LEDs
187#define RGBLIGHT_HUE_STEP 8 187#define RGBLIGHT_HUE_STEP 8
188#define RGBLIGHT_SAT_STEP 8 188#define RGBLIGHT_SAT_STEP 8
189#define RGBLIGHT_VAL_STEP 8 189#define RGBLIGHT_VAL_STEP 8
190#endif 190#endif
generated by cgit v1.2.3 (git 2.25.1) at 2025-12-14 15:40:13 +0000