diff options
Diffstat (limited to 'keyboards/macro3/readme.md')
| -rw-r--r-- | keyboards/macro3/readme.md | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/keyboards/macro3/readme.md b/keyboards/macro3/readme.md index 66a142ecd..023474117 100644 --- a/keyboards/macro3/readme.md +++ b/keyboards/macro3/readme.md | |||
| @@ -1,8 +1,8 @@ | |||
| 1 | # Macro3 | 1 | # Macro3 |
| 2 | 2 | ||
| 3 |  | 3 |  |
| 4 | 4 | ||
| 5 | Macro3 is a low-profile macro pad with encoder support designed by [@davidphilipbarr](https://github.com/davidphilipbarr) using direct micro-controller pin wiring. | 5 | Macro3 is a low-profile macro pad with dual encoder support designed by [@davidphilipbarr](https://github.com/davidphilipbarr). |
| 6 | 6 | ||
| 7 | ## Keyboard Info | 7 | ## Keyboard Info |
| 8 | 8 | ||
| @@ -21,6 +21,6 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to | |||
| 21 | Enter the bootloader in 3 ways: | 21 | Enter the bootloader in 3 ways: |
| 22 | 22 | ||
| 23 | * **Bootmagic reset**: Hold down the top right key and plug in the controller. | 23 | * **Bootmagic reset**: Hold down the top right key and plug in the controller. |
| 24 | * **Physical reset button**: Briefly press the reset button soldered on the PCB. | ||
| 25 | * **Keycode in layout**: Press the key mapped to `RESET` if it is configured. | 24 | * **Keycode in layout**: Press the key mapped to `RESET` if it is configured. |
| 25 | * **Physical reset pins**: Briefly short the RST and GND pins on the microcontroller using tweezers, a paperclip, or any other conductive material. | ||
| 26 | 26 | ||