aboutsummaryrefslogtreecommitdiff
path: root/keyboards/planck/rev6_drop/config.h
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/planck/rev6_drop/config.h')
-rw-r--r--keyboards/planck/rev6_drop/config.h128
1 files changed, 128 insertions, 0 deletions
diff --git a/keyboards/planck/rev6_drop/config.h b/keyboards/planck/rev6_drop/config.h
new file mode 100644
index 000000000..c1baa34b7
--- /dev/null
+++ b/keyboards/planck/rev6_drop/config.h
@@ -0,0 +1,128 @@
1/*
2 * Copyright 2018 Jack Humbert <jack.humb@gmail.com>
3 *
4 * This program is free software: you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License as published by
6 * the Free Software Foundation, either version 2 of the License, or
7 * (at your option) any later version.
8 *
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
13 *
14 * You should have received a copy of the GNU General Public License
15 * along with this program. If not, see <http://www.gnu.org/licenses/>.
16 */
17
18#pragma once
19
20/* USB Device descriptor parameter */
21#define PRODUCT_ID 0xA4F9
22#define DEVICE_VER 0x0006
23#undef MANUFACTURER
24#define MANUFACTURER Drop
25
26#undef MATRIX_ROWS
27#undef MATRIX_COLS
28/* key matrix size */
29#define MATRIX_ROWS 8
30#define MATRIX_COLS 6
31
32/*
33 * Keyboard Matrix Assignments
34 *
35 * Change this to how you wired your keyboard
36 * COLS: AVR pins used for columns, left to right
37 * ROWS: AVR pins used for rows, top to bottom
38 * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
39 * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
40 *
41 */
42/* Note: These are not used for arm boards. They're here purely as documentation. */
43#undef MATRIX_ROW_PINS
44#undef MATRIX_COL_PINS
45
46#define MATRIX_ROW_PINS \
47 { A10, A9, A8, B15, C13, C14, C15, A2 }
48#define MATRIX_COL_PINS \
49 { B11, B10, B2, B1, A7, B0 }
50
51#define UNUSED_PINS
52
53#define ENCODERS_PAD_A \
54 { B12 }
55#define ENCODERS_PAD_B \
56 { B13 }
57
58#define DIP_SWITCH_PINS \
59 { B14, A15, A0, B9 }
60
61#define MUSIC_MAP
62#undef AUDIO_VOICES
63#undef AUDIO_PIN
64#define AUDIO_PIN A5
65#define AUDIO_PIN_ALT A4
66#define AUDIO_PIN_ALT_AS_NEGATIVE
67
68/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
69// #define DEBOUNCE 6
70
71/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
72//#define LOCKING_SUPPORT_ENABLE
73/* Locking resynchronize hack */
74//#define LOCKING_RESYNC_ENABLE
75
76/*
77 * Force NKRO
78 *
79 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
80 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
81 * makefile for this to work.)
82 *
83 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
84 * until the next keyboard reset.
85 *
86 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
87 * fully operational during normal computer usage.
88 *
89 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
90 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
91 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
92 * power-up.
93 *
94 */
95//#define FORCE_NKRO
96
97/*
98 * Feature disable options
99 * These options are also useful to firmware size reduction.
100 */
101
102/* disable debug print */
103//#define NO_DEBUG
104
105/* disable print */
106//#define NO_PRINT
107
108/* disable action features */
109//#define NO_ACTION_LAYER
110//#define NO_ACTION_TAPPING
111//#define NO_ACTION_ONESHOT
112//#define NO_ACTION_MACRO
113//#define NO_ACTION_FUNCTION
114
115/*
116 * WS2812 Underglow Matrix options
117 */
118#define RGB_DI_PIN A1
119#define RGBLED_NUM 9
120#define DRIVER_LED_TOTAL RGBLED_NUM
121
122#define WS2812_PWM_DRIVER PWMD2
123#define WS2812_PWM_CHANNEL 2
124#define WS2812_PWM_PAL_MODE 1
125#define WS2812_DMA_STREAM STM32_DMA1_STREAM2
126#define WS2812_DMA_CHANNEL 2
127
128#define RGB_DISABLE_WHEN_USB_SUSPENDED