2 files changed, 1 insertions, 96 deletions
diff --git a/keyboards/snagpad/config.h b/keyboards/snagpad/config.h
index a4ab9d5e2..339bdd1be 100644
--- a/keyboards/snagpad/config.h
+++ b/keyboards/snagpad/config.h
@@ -47,23 +47,3 @@
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
 #endif
-#define DYNAMIC_KEYMAP_LAYER_COUNT 4
-// EEPROM usage
-// TODO: refactor with new user EEPROM code (coming soon)
-#define EEPROM_MAGIC 0x451F
-#define EEPROM_MAGIC_ADDR 34
-// Bump this every time we change what we store
-// This will automatically reset the EEPROM with defaults
-// and avoid loading invalid data from the EEPROM
-#define EEPROM_VERSION 0x08
-#define EEPROM_VERSION_ADDR 36
-// Dynamic keymap starts after EEPROM version
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 37
-// Dynamic macro starts after dynamic keymaps (37+(4*5*4*2)) = (37+160)
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 197
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 827
-#define DYNAMIC_KEYMAP_MACRO_COUNT 16
-\ No newline at end of file
diff --git a/keyboards/snagpad/keymaps/via/rules.mk b/keyboards/snagpad/keymaps/via/rules.mk
index 032d68c5e..1e5b99807 100644
--- a/keyboards/snagpad/keymaps/via/rules.mk
+++ b/keyboards/snagpad/keymaps/via/rules.mk
@@ -1,76 +1 @@
-# MCU name
+VIA_ENABLE = yes
-MCU = atmega32u4
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-# Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
-BOOTLOADER = caterina
-# Boot Section Size in *bytes*
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no        # Console for debug(+400)
-COMMAND_ENABLE = no        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-# This is the VIA magic
-RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes
-SRC += keyboards/wilba_tech/wt_main.c
-LAYOUTS = ortho_5x4 numpad_5x4

diff --git a/keyboards/snagpad/config.h b/keyboards/snagpad/config.h index a4ab9d5e2..339bdd1be 100644 --- a/keyboards/snagpad/config.h +++ b/keyboards/snagpad/config.h
@@ -47,23 +47,3 @@
47	#define RGBLIGHT_SAT_STEP 8	47	#define RGBLIGHT_SAT_STEP 8
48	#define RGBLIGHT_VAL_STEP 8	48	#define RGBLIGHT_VAL_STEP 8
49	#endif	49	#endif
50
51	#define DYNAMIC_KEYMAP_LAYER_COUNT 4
52
53	// EEPROM usage
54
55	// TODO: refactor with new user EEPROM code (coming soon)
56	#define EEPROM_MAGIC 0x451F
57	#define EEPROM_MAGIC_ADDR 34
58	// Bump this every time we change what we store
59	// This will automatically reset the EEPROM with defaults
60	// and avoid loading invalid data from the EEPROM
61	#define EEPROM_VERSION 0x08
62	#define EEPROM_VERSION_ADDR 36
63
64	// Dynamic keymap starts after EEPROM version
65	#define DYNAMIC_KEYMAP_EEPROM_ADDR 37
66	// Dynamic macro starts after dynamic keymaps (37+(454*2)) = (37+160)
67	#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 197
68	#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 827
69	#define DYNAMIC_KEYMAP_MACRO_COUNT 16 \ No newline at end of file


diff --git a/keyboards/snagpad/keymaps/via/rules.mk b/keyboards/snagpad/keymaps/via/rules.mk index 032d68c5e..1e5b99807 100644 --- a/keyboards/snagpad/keymaps/via/rules.mk +++ b/keyboards/snagpad/keymaps/via/rules.mk
@@ -1,76 +1 @@
1	# MCU name		VIA_ENABLE = yes
2	MCU = atmega32u4
3
4	# Processor frequency.
5	# This will define a symbol, F_CPU, in all source code files equal to the
6	# processor frequency in Hz. You can then use this symbol in your source code to
7	# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
8	# automatically to create a 32-bit value in your source code.
9	#
10	# This will be an integer division of F_USB below, as it is sourced by
11	# F_USB after it has run through any CPU prescalers. Note that this value
12	# does not change the processor frequency - it should merely be updated to
13	# reflect the processor speed set externally so that the code can use accurate
14	# software delays.
15	F_CPU = 16000000
16
17	#
18	# LUFA specific
19	#
20	# Target architecture (see library "Board Types" documentation).
21	ARCH = AVR8
22
23	# Input clock frequency.
24	# This will define a symbol, F_USB, in all source code files equal to the
25	# input clock frequency (before any prescaling is performed) in Hz. This value may
26	# differ from F_CPU if prescaling is used on the latter, and is required as the
27	# raw input clock is fed directly to the PLL sections of the AVR for high speed
28	# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
29	# at the end, this will be done automatically to create a 32-bit value in your
30	# source code.
31	#
32	# If no clock division is performed on the input clock inside the AVR (via the
33	# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
34	F_USB = $(F_CPU)
35
36	# Interrupt driven control endpoint task(+60)
37	OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
38
39	# Bootloader selection
40	# Teensy halfkay
41	# Pro Micro caterina
42	# Atmel DFU atmel-dfu
43	# LUFA DFU lufa-dfu
44	# QMK DFU qmk-dfu
45	# atmega32a bootloadHID
46	BOOTLOADER = caterina
47
48	# Boot Section Size in bytes
49	# OPT_DEFS += -DBOOTLOADER_SIZE=4096
50
51
52	# Build Options
53	# change yes to no to disable
54	#
55	BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
56	MOUSEKEY_ENABLE = no # Mouse keys(+4700)
57	EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
58	CONSOLE_ENABLE = no # Console for debug(+400)
59	COMMAND_ENABLE = no # Commands for debug and configuration
60	# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
61	SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
62	# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
63	NKRO_ENABLE = yes # USB Nkey Rollover
64	BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
65	MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
66	UNICODE_ENABLE = no # Unicode
67	BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
68	AUDIO_ENABLE = no # Audio output on port C6
69	FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
70
71	# This is the VIA magic
72	RAW_ENABLE = yes
73	DYNAMIC_KEYMAP_ENABLE = yes
74	SRC += keyboards/wilba_tech/wt_main.c
75
76	LAYOUTS = ortho_5x4 numpad_5x4