1 files changed, 42 insertions, 0 deletions

diff --git a/keyboards/splitography/readme.md b/keyboards/splitography/readme.md
new file mode 100644
index 000000000..eeb9b2f40
--- /dev/null
+++ b/keyboards/splitography/readme.md
@@ -0,0 +1,42 @@
+# Splitography
+
+![Splitography](https://i.imgur.com/NlmR4Gc.jpeg)
+
+A *pay what you will* compact keyboard intended for use with [Plover](https://www.openstenoproject.org/), free and open source stenography software. This is a low-cost keyboard with minimal packaging and design, and arrives fully assembled, ready to use.
+
+* Keyboard Maintainer: [The QMK Community](https://github.com/qmk)
+* Hardware Supported: Splitography
+* Hardware Availability: [softhruf.love](https://softhruf.love/collections/writers)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make splitography:default
+
+Flashing example for this keyboard:
+
+    make splitography:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard.
+* **Physical reset button**: Briefly press the button on the back of the PCB.
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available.
+
+## [Guide](https://softhruf.love/pages/guides)
+
+[Splitography quick start video](https://www.youtube.com/watch?v=ru4cRQ2s_v0)
+
+A short video guide on how to set up the SOFT/HRUF Splitography, a mechanical keyboard intended for use with [Plover](https://www.openstenoproject.org/plover/).
+
+Here is a reference card for the standard keyboard layout:
+
+![Reference card](https://i.imgur.com/ywe8jXR.png)
+
+* While holding down a colored thumb key, the matching colored functions/characters on the remaining keys can be pressed.
+* Bottom edge keys are accessed by holding down both keys.
+* Numlock locks in the Numpad layer.
+* Alt and Shift pressed simultaneously to return to the standard layout.