1 files changed, 21 insertions, 9 deletions

diff --git a/keyboards/the_uni/readme.md b/keyboards/the_uni/readme.md
index 730ea2483..cd1c99e43 100644
--- a/keyboards/the_uni/readme.md
+++ b/keyboards/the_uni/readme.md
@@ -1,19 +1,31 @@
 # The Uni
 
-![The Uni](https://raw.githubusercontent.com/petercpark/The_Uni/main/Pics/layout.png)
-![The Uni Closeup](https://github.com/petercpark/The_Uni/blob/main/Pics/close-up-uni.jpg?raw=true)
+​
+![Layout](https://docs.stenokeyboards.com/images/uni-layout.png)
+![The Uni v2](https://github.com/petercpark/The_Uni/blob/main/Pics/uni%20v2/uni-v2.JPG?raw=true)
 
 A compact unibody split ortholinear keyboard made specifically for stenography.
 
--   Keyboard Maintainer: [Peter C. Park](https://github.com/petercpark)
--   Link to Keyboard Files: [The_Uni](https://github.com/petercpark/The_Uni)
--   Hardware Supported: The Uni v1 and v2 (pro micro or equivalent)
--   Hardware Availability: [website](https://www.stenokeyboards.com)
+-   Keyboard Maintainer: [Peter](https://github.com/petercpark)
+-   Link to Keyboard Files (pro_micro version): [https://github.com/petercpark/The_Uni](https://github.com/petercpark/The_Uni)
+-   Hardware Supported:
 
-Make example for this keyboard (after setting up your build environment):
+    -   The Uni v1 and v2 (pro_micro)
+    -   The Uni v3 (usb_c)
 
-    make the_uni:default
+-   Hardware Availability: [https://www.stenokeyboards.com](https://www.stenokeyboards.com)
 
-To enter the bootloader, short the rst and gnd pins with a conductive material such as a tweezer or a wire. Uni v2 will have reset pads next to the pro micro so you can short these pads to reset the pro micro.
+# Bootloader
+
+Enter the bootloader by:
+
+* **Physical reset button**: On the Uni v3, briefly press the button on the back of the PCB.
+* **Reset Pads**: Uni v1 and v2 have pins/pads you must short instead (RST to GND).
+
+Make examples for this keyboard (after setting up your build environment):
+
+    make the_uni/pro_micro:default
+
+    make the_uni/usb_c:default
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).