1 files changed, 7 insertions, 31 deletions

diff --git a/keyboards/winkeyless/bmini/readme.md b/keyboards/winkeyless/bmini/readme.md
index 3401b9744..b8cc85495 100644
--- a/keyboards/winkeyless/bmini/readme.md
+++ b/keyboards/winkeyless/bmini/readme.md
@@ -2,42 +2,18 @@
 
 A 75% keyboard with RGB
 
-Keyboard Maintainer: QMK Community  
-Hardware Supported: B.mini PCB  
-Hardware Availability: http://winkeyless.kr/product/b-mini-x2-pcb/  
+* Keyboard Maintainer: QMK Community
+* Hardware Supported: B.mini PCB
+* Hardware Availability: <http://winkeyless.kr/product/b-mini-x2-pcb/>
 
 Make example for this keyboard (after setting up your build environment):
 
     make winkeyless/bmini:default
 
-Flashing
-
-ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. 
-
-Windows: 
-1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
-2. Place your keyboard into reset. 
-3. Press the `Find Device` button and ensure that your keyboard is found.
-4. Press the `Open .hex File` button and locate the `.hex` file you created.
-5. Press the `Flash Device` button and wait for the process to complete. 
-
-macOS:
-1. Install homebrew by typing the following:   
-    ```
-    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
-    ```
-2. Install `crosspack-avr`.  
-    ```
-    brew cask install crosspack-avr
-    ```
-3. Install the following packages:
-    ```
-    brew install python
-    brew install pyusb
-    brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
-
-4. Place your keyboard into reset. 
-5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. 
+Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
 
+    make winkeyless/bmini:default:flash
+
+**Reset Key**: Hold down the key located at *LOCATION*, commonly programmed as *KEY* while plugging in the keyboard.
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).