Tada68 instructions, updated and clarified to avoid bricking keyboards

1 files changed, 6 insertions, 4 deletions

diff --git a/keyboards/tada68/readme.md b/keyboards/tada68/readme.md
index 1986008bd..cc025cad4 100755
--- a/keyboards/tada68/readme.md
+++ b/keyboards/tada68/readme.md
@@ -15,15 +15,17 @@ See [build environment setup](https://docs.qmk.fm/build_environment_setup.html)
 
 ## Flashing Instructions
 
-1) from the `qmk_firmware` directory run:
+*Read all the instructions, there are a few warnings of things to avoid doing to avoid bricking your Tada68. _It is much too easy to do!  _
+
+1) from the `qmk_firmware\` directory run:
 ```
-$ make tada68-default-bin
+$ make tada68-default-flashbin
 ```
 
-2) hit the reset button on the TADA, the lights will start flashing.
+2) Connect your keyboard to Windows computer, hit the reset button on the TADA, the lights will start flashing.
 
 3) You'll see a new drive on your computer called TADA68. Backup the original factory `FLASH.BIN` file thats inside it.
 
 4) Delete `FLASH.BIN` from the TADA drive and copy `tada68_default.bin` that was generated at the root of the qmk directory into the TADA drive.
 
-5) Hit ESC on the keyboard. The lights will stop flashing and your firmware is loaded!
+5) *Do not eject the USB device.* Hit ESC on the keyboard. The lights will stop flashing and your firmware is loaded!