[Keyboard] Added wilba.tech WT70-JB (#12347)

Co-authored-by: Ryan <fauxpark@gmail.com>

9 files changed, 265 insertions, 0 deletions

diff --git a/keyboards/wilba_tech/wt70_jb/config.h b/keyboards/wilba_tech/wt70_jb/config.h
new file mode 100644
index 000000000..67bf6b084
--- /dev/null
+++ b/keyboards/wilba_tech/wt70_jb/config.h
@@ -0,0 +1,64 @@
+/* Copyright 2020 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x6582 // wilba.tech
+#define PRODUCT_ID      0x001F // PCB #31
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    wilba.tech
+#define PRODUCT         wilba.tech WT70-JB
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 17
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { E6, F0, F4, F6, F7 }
+#define MATRIX_COL_PINS { F5, D5, D3, D2, D1, D0, B7, C7, C6, B6, B5, B4, D7, D6, D4, B0, B3 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+// RGBLIGHT configuation
+#define RGB_DI_PIN B2
+#ifdef RGB_DI_PIN
+   #define RGBLED_NUM 2
+   #define RGBLIGHT_HUE_STEP 8
+   #define RGBLIGHT_SAT_STEP 8
+   #define RGBLIGHT_VAL_STEP 8
+   #define RGBLIGHT_ANIMATIONS
+#endif
diff --git a/keyboards/wilba_tech/wt70_jb/info.json b/keyboards/wilba_tech/wt70_jb/info.json
new file mode 100644
index 000000000..bfe4f68d5
--- /dev/null
+++ b/keyboards/wilba_tech/wt70_jb/info.json
@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "wilba.tech WT70-JB", 
+    "url": "https://wilba.tech", 
+    "maintainer": "Wilba", 
+    "width": 18.5, 
+    "height": 5, 
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15.5, "y":0}, {"x":16.5, "y":0}, {"x":17.5, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15.5, "y":1}, {"x":16.5, "y":1}, {"x":17.5, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":16.5, "y":3}, {"x":0, "y":4, "w":1.5}, {"x":1.5, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"x":11, "y":4, "w":1.5}, {"x":12.5, "y":4}, {"x":13.5, "y":4, "w":1.5}, {"x":15.5, "y":4}, {"x":16.5, "y":4}, {"x":17.5, "y":4}]
+        }
+    }
+}
\ No newline at end of file
diff --git a/keyboards/wilba_tech/wt70_jb/keymaps/default/keymap.c b/keyboards/wilba_tech/wt70_jb/keymaps/default/keymap.c
new file mode 100644
index 000000000..725b95551
--- /dev/null
+++ b/keyboards/wilba_tech/wt70_jb/keymaps/default/keymap.c
@@ -0,0 +1,52 @@
+/* Copyright 2020 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+// Default layer
+[0] = LAYOUT_all(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_DEL,  KC_INS,  KC_HOME, KC_PGUP,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_DEL,  KC_END,  KC_PGDN,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1),                              KC_UP,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, MO(1),   KC_RCTL,                   KC_LEFT, KC_DOWN, KC_RGHT),
+
+// Fn1 Layer
+[1] = LAYOUT_all(
+        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn2 Layer
+[2] = LAYOUT_all(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn3 Layer
+[3] = LAYOUT_all(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS),
+
+};
diff --git a/keyboards/wilba_tech/wt70_jb/keymaps/via/keymap.c b/keyboards/wilba_tech/wt70_jb/keymaps/via/keymap.c
new file mode 100644
index 000000000..1f9d213f0
--- /dev/null
+++ b/keyboards/wilba_tech/wt70_jb/keymaps/via/keymap.c
@@ -0,0 +1 @@
+#include "../default/keymap.c"
\ No newline at end of file
diff --git a/keyboards/wilba_tech/wt70_jb/keymaps/via/rules.mk b/keyboards/wilba_tech/wt70_jb/keymaps/via/rules.mk
new file mode 100644
index 000000000..1e5b99807
--- /dev/null
+++ b/keyboards/wilba_tech/wt70_jb/keymaps/via/rules.mk
@@ -0,0 +1 @@
+VIA_ENABLE = yes
diff --git a/keyboards/wilba_tech/wt70_jb/readme.md b/keyboards/wilba_tech/wt70_jb/readme.md
new file mode 100644
index 000000000..0d32c99fd
--- /dev/null
+++ b/keyboards/wilba_tech/wt70_jb/readme.md
@@ -0,0 +1,19 @@
+# wilba.tech WT70-JB
+
+![wilba.tech WT70-JB](https://i.imgur.com/qOtyfp4h.jpg)
+
+WT70-JB is a keyboard PCB supporting TKL without F-row layout.
+
+* Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)
+* Hardware Supported: wilba.tech WT70-JB
+* Hardware Availability: [wilba.tech](https://wilba.tech/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make wilba_tech/wt70_jb:default
+
+Flashing example for this keyboard:
+
+    make wilba_tech/wt70_jb:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/wilba_tech/wt70_jb/rules.mk b/keyboards/wilba_tech/wt70_jb/rules.mk
new file mode 100644
index 000000000..3d0797115
--- /dev/null
+++ b/keyboards/wilba_tech/wt70_jb/rules.mk
@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
\ No newline at end of file
diff --git a/keyboards/wilba_tech/wt70_jb/wt70_jb.c b/keyboards/wilba_tech/wt70_jb/wt70_jb.c
new file mode 100644
index 000000000..0bb9aca09
--- /dev/null
+++ b/keyboards/wilba_tech/wt70_jb/wt70_jb.c
@@ -0,0 +1,60 @@
+/* Copyright 2020 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "wt70_jb.h"
+
+bool g_first_execution = false;
+
+void keyboard_pre_init_kb(void) {
+    setPinOutput(F1);
+
+    keyboard_pre_init_user();
+}
+
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(F1, led_state.caps_lock);
+    }
+    return true;
+}
+
+// This is some magic so that PCBs flashed with VIA firmware at the factory
+// will start with an RGB test pattern. Not relevant for non-VIA firmware.
+#ifdef VIA_ENABLE
+
+// Called from via_init() if VIA_ENABLE
+// Called from matrix_init_kb() if not VIA_ENABLE
+void via_init_kb(void)
+{
+    // If the EEPROM has the magic, the data is good.
+    // OK to load from EEPROM
+    if (via_eeprom_is_valid()) {
+    } else      {
+        // Cache "first execution" state so we can do something
+        // specific after QMK initialization has done its thing.
+        g_first_execution = true;
+        // DO NOT set EEPROM valid here, let caller do this
+    }
+}
+
+void keyboard_post_init_kb() {
+    // This is a workaround to ensure "EEPROM cleared" PCBs will
+    // start with the RGB test mode, essential for testing LEDs.
+    if ( g_first_execution ) {
+        rgblight_mode(RGBLIGHT_MODE_RGB_TEST);
+    }
+}
+
+#endif // VIA_ENABLE
diff --git a/keyboards/wilba_tech/wt70_jb/wt70_jb.h b/keyboards/wilba_tech/wt70_jb/wt70_jb.h
new file mode 100644
index 000000000..b69d1a763
--- /dev/null
+++ b/keyboards/wilba_tech/wt70_jb/wt70_jb.h
@@ -0,0 +1,34 @@
+/* Copyright 2020 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define ____ KC_NO
+
+#define LAYOUT_all( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K213, K014, K015, K016, \
+    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113,       K114, K115, K116, \
+    K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, \
+    K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313,                   K315, \
+    K400, K401, K402,                   K403,                         K411, K412, K413,       K414, K415, K416 \
+) { \
+    { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016 }, \
+    { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116 }, \
+    { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, ____, ____, ____ }, \
+    { K300, ____, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, ____, K315, ____ }, \
+    { K400, K401, K402, K403, ____, ____, ____, ____, ____, ____, ____, K411, K412, K413, K414, K415, K416 }  \
+}