Run clang-format manually to fix recently changed files (#7934)

* Run clang-format manually to fix recently changed files

* Run clang-format manually to fix recently changed files - revert template files

* Run clang-format manually to fix recently changed files - format off for ascii_to_keycode_lut

13 files changed, 170 insertions, 218 deletions

diff --git a/drivers/issi/is31fl3733.c b/drivers/issi/is31fl3733.c
index b913922b0..dddf0cb73 100644
--- a/drivers/issi/is31fl3733.c
+++ b/drivers/issi/is31fl3733.c
@@ -217,7 +217,7 @@ void IS31FL3733_update_pwm_buffers(uint8_t addr, uint8_t index) {
 
         // If any of the transactions fail we risk writing dirty PG0,
         // refresh page 0 just in case.
-        if (!IS31FL3733_write_pwm_buffer(addr, g_pwm_buffer[index])){
+        if (!IS31FL3733_write_pwm_buffer(addr, g_pwm_buffer[index])) {
             g_led_control_registers_update_required[index] = true;
         }
     }
diff --git a/quantum/color.c b/quantum/color.c
index 8bd52444f..c05030062 100644
--- a/quantum/color.c
+++ b/quantum/color.c
@@ -87,9 +87,9 @@ RGB hsv_to_rgb(HSV hsv) {
 }
 
 #ifdef RGBW
-#ifndef MIN
-#    define MIN(a, b) ((a) < (b) ? (a) : (b))
-#endif
+#    ifndef MIN
+#        define MIN(a, b) ((a) < (b) ? (a) : (b))
+#    endif
 void convert_rgb_to_rgbw(LED_TYPE *led) {
     // Determine lowest value in all three colors, put that into
     // the white channel and then shift all colors by that amount
diff --git a/quantum/dynamic_keymap.c b/quantum/dynamic_keymap.c
index 11d28592d..0d8ea56b7 100644
--- a/quantum/dynamic_keymap.c
+++ b/quantum/dynamic_keymap.c
@@ -20,36 +20,36 @@
 #include "progmem.h"  // to read default from flash
 #include "quantum.h"  // for send_string()
 #include "dynamic_keymap.h"
-#include "via.h" // for default VIA_EEPROM_ADDR_END
+#include "via.h"  // for default VIA_EEPROM_ADDR_END
 
 #ifndef DYNAMIC_KEYMAP_LAYER_COUNT
-#   define DYNAMIC_KEYMAP_LAYER_COUNT 4
+#    define DYNAMIC_KEYMAP_LAYER_COUNT 4
 #endif
 
 #ifndef DYNAMIC_KEYMAP_MACRO_COUNT
-#   define DYNAMIC_KEYMAP_MACRO_COUNT 16
+#    define DYNAMIC_KEYMAP_MACRO_COUNT 16
 #endif
 
 // If DYNAMIC_KEYMAP_EEPROM_ADDR not explicitly defined in config.h,
 // default it start after VIA_EEPROM_CUSTOM_ADDR+VIA_EEPROM_CUSTOM_SIZE
 #ifndef DYNAMIC_KEYMAP_EEPROM_ADDR
-#   ifdef VIA_EEPROM_CUSTOM_CONFIG_ADDR
-#       define DYNAMIC_KEYMAP_EEPROM_ADDR (VIA_EEPROM_CUSTOM_CONFIG_ADDR+VIA_EEPROM_CUSTOM_CONFIG_SIZE)
-#   else
-#       error DYNAMIC_KEYMAP_EEPROM_ADDR not defined
-#   endif 
+#    ifdef VIA_EEPROM_CUSTOM_CONFIG_ADDR
+#        define DYNAMIC_KEYMAP_EEPROM_ADDR (VIA_EEPROM_CUSTOM_CONFIG_ADDR + VIA_EEPROM_CUSTOM_CONFIG_SIZE)
+#    else
+#        error DYNAMIC_KEYMAP_EEPROM_ADDR not defined
+#    endif
 #endif
 
 // Dynamic macro starts after dynamic keymaps
 #ifndef DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR
-#   define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR (DYNAMIC_KEYMAP_EEPROM_ADDR+(DYNAMIC_KEYMAP_LAYER_COUNT*MATRIX_ROWS*MATRIX_COLS*2))
+#    define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR (DYNAMIC_KEYMAP_EEPROM_ADDR + (DYNAMIC_KEYMAP_LAYER_COUNT * MATRIX_ROWS * MATRIX_COLS * 2))
 #endif
 
 // Dynamic macro uses up all remaining memory
 // Assumes 1K EEPROM on ATMega32U4
 // Override for anything different
 #ifndef DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE
-#   define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE (1024-DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR)
+#    define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE (1024 - DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR)
 #endif
 
 uint8_t dynamic_keymap_get_layer_count(void) { return DYNAMIC_KEYMAP_LAYER_COUNT; }
diff --git a/quantum/encoder.c b/quantum/encoder.c
index c41b89f49..8e11562eb 100644
--- a/quantum/encoder.c
+++ b/quantum/encoder.c
@@ -37,8 +37,8 @@ static pin_t encoders_pad_b[] = ENCODERS_PAD_B;
 
 static int8_t encoder_LUT[] = {0, -1, 1, 0, 1, 0, 0, -1, -1, 0, 0, 1, 0, 1, -1, 0};
 
-static uint8_t encoder_state[NUMBER_OF_ENCODERS] = {0};
-static int8_t encoder_pulses[NUMBER_OF_ENCODERS] = {0};
+static uint8_t encoder_state[NUMBER_OF_ENCODERS]  = {0};
+static int8_t  encoder_pulses[NUMBER_OF_ENCODERS] = {0};
 
 #ifdef SPLIT_KEYBOARD
 // right half encoders come over as second set of encoders
@@ -88,7 +88,7 @@ static void encoder_update(int8_t index, uint8_t state) {
         encoder_value[index]++;
         encoder_update_kb(index, true);
     }
-    if (encoder_pulses[i] <= -ENCODER_RESOLUTION) { // direction is arbitrary here, but this clockwise
+    if (encoder_pulses[i] <= -ENCODER_RESOLUTION) {  // direction is arbitrary here, but this clockwise
         encoder_value[index]--;
         encoder_update_kb(index, false);
     }
@@ -109,7 +109,7 @@ void encoder_state_raw(uint8_t* slave_state) { memcpy(slave_state, &encoder_valu
 void encoder_update_raw(uint8_t* slave_state) {
     for (uint8_t i = 0; i < NUMBER_OF_ENCODERS; i++) {
         uint8_t index = i + thatHand;
-        int8_t delta = slave_state[i] - encoder_value[index];
+        int8_t  delta = slave_state[i] - encoder_value[index];
         while (delta > 0) {
             delta--;
             encoder_value[index]++;
diff --git a/quantum/process_keycode/process_rgb.c b/quantum/process_keycode/process_rgb.c
index c76166342..627e5986f 100644
--- a/quantum/process_keycode/process_rgb.c
+++ b/quantum/process_keycode/process_rgb.c
@@ -20,8 +20,8 @@ typedef void (*rgb_func_pointer)(void);
 
 /**
  * Wrapper for inc/dec rgb keycode
- * 
- * noinline to optimise for firmware size not speed (not in hot path) 
+ *
+ * noinline to optimise for firmware size not speed (not in hot path)
  */
 static void __attribute__((noinline)) handleKeycodeRGB(const uint8_t is_shifted, const rgb_func_pointer inc_func, const rgb_func_pointer dec_func) {
     if (is_shifted) {
@@ -35,10 +35,10 @@ static void __attribute__((noinline)) handleKeycodeRGB(const uint8_t is_shifted,
  * Wrapper for animation mode
  *   - if not in animation family -> jump to that animation
  *   - otherwise -> wrap round animation speed
- * 
- * noinline to optimise for firmware size not speed (not in hot path) 
+ *
+ * noinline to optimise for firmware size not speed (not in hot path)
  */
-static void __attribute__((noinline,unused)) handleKeycodeRGBMode(const uint8_t start, const uint8_t end) {
+static void __attribute__((noinline, unused)) handleKeycodeRGBMode(const uint8_t start, const uint8_t end) {
     if ((start <= rgblight_get_mode()) && (rgblight_get_mode() < end)) {
         rgblight_step();
     } else {
diff --git a/quantum/quantum.c b/quantum/quantum.c
index 9cd50b11d..36062866e 100644
--- a/quantum/quantum.c
+++ b/quantum/quantum.c
@@ -320,8 +320,8 @@ bool process_record_quantum(keyrecord_t *record) {
     switch (keycode) {
         case GRAVE_ESC: {
             /* true if the last press of GRAVE_ESC was shifted (i.e. GUI or SHIFT were pressed), false otherwise.
-            * Used to ensure that the correct keycode is released if the key is released.
-            */
+             * Used to ensure that the correct keycode is released if the key is released.
+             */
             static bool grave_esc_was_shifted = false;
 
             uint8_t shifted = get_mods() & ((MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT) | MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)));
@@ -379,6 +379,7 @@ __attribute__((weak)) const bool ascii_to_altgr_lut[128] PROGMEM = {0, 0, 0, 0,
 
                                                                     0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
 
+// clang-format off
 __attribute__((weak)) const uint8_t ascii_to_keycode_lut[128] PROGMEM = {// NUL   SOH      STX      ETX      EOT      ENQ      ACK      BEL
                                                                          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
                                                                          // BS    TAB      LF       VT       FF       CR       SO       SI
@@ -412,6 +413,7 @@ __attribute__((weak)) const uint8_t ascii_to_keycode_lut[128] PROGMEM = {// NUL
                                                                          KC_P, KC_Q, KC_R, KC_S, KC_T, KC_U, KC_V, KC_W,
                                                                          // x     y        z        {        |        }        ~        DEL
                                                                          KC_X, KC_Y, KC_Z, KC_LBRC, KC_BSLS, KC_RBRC, KC_GRV, KC_DEL};
+// clang-format on
 
 void send_string(const char *str) { send_string_with_delay(str, 0); }
 
@@ -477,7 +479,7 @@ void send_string_with_delay_P(const char *str, uint8_t interval) {
 
 void send_char(char ascii_code) {
 #if defined(AUDIO_ENABLE) && defined(SENDSTRING_BELL)
-    if (ascii_code == '\a') { // BEL
+    if (ascii_code == '\a') {  // BEL
         PLAY_SONG(bell_song);
         return;
     }
diff --git a/quantum/quantum.h b/quantum/quantum.h
index 09550fec3..48887026d 100644
--- a/quantum/quantum.h
+++ b/quantum/quantum.h
@@ -163,11 +163,11 @@ extern layer_state_t layer_state;
 #endif
 
 #ifdef DYNAMIC_KEYMAP_ENABLE
-#   include "dynamic_keymap.h"
+#    include "dynamic_keymap.h"
 #endif
 
 #ifdef VIA_ENABLE
-#   include "via.h"
+#    include "via.h"
 #endif
 
 // Function substitutions to ease GPIO manipulation
diff --git a/quantum/quantum_keycodes.h b/quantum/quantum_keycodes.h
index c8d0e354b..54428fe1f 100644
--- a/quantum/quantum_keycodes.h
+++ b/quantum/quantum_keycodes.h
@@ -677,7 +677,7 @@ enum quantum_keycodes {
 #define AG_TOGG MAGIC_TOGGLE_ALT_GUI
 
 #define GUI_OFF MAGIC_NO_GUI
-#define GUI_ON  MAGIC_UNNO_GUI
+#define GUI_ON MAGIC_UNNO_GUI
 
 #define GE_SWAP MAGIC_SWAP_GRAVE_ESC
 #define GE_NORM MAGIC_UNSWAP_GRAVE_ESC
@@ -685,8 +685,8 @@ enum quantum_keycodes {
 #define BS_SWAP MAGIC_SWAP_BACKSLASH_BACKSPACE
 #define BS_NORM MAGIC_UNSWAP_BACKSLASH_BACKSPACE
 
-#define NK_ON   MAGIC_HOST_NKRO
-#define NK_OFF  MAGIC_UNHOST_NKRO
+#define NK_ON MAGIC_HOST_NKRO
+#define NK_OFF MAGIC_UNHOST_NKRO
 #define NK_TOGG MAGIC_TOGGLE_NKRO
 
 #define EH_LEFT MAGIC_EE_HANDS_LEFT
diff --git a/quantum/rgb_matrix.c b/quantum/rgb_matrix.c
index 25ca44054..1a9cf82e5 100644
--- a/quantum/rgb_matrix.c
+++ b/quantum/rgb_matrix.c
@@ -434,11 +434,11 @@ void rgb_matrix_init(void) {
     eeconfig_debug_rgb_matrix();  // display current eeprom values
 }
 
-void rgb_matrix_set_suspend_state(bool state) { 
-    if (RGB_DISABLE_WHEN_USB_SUSPENDED && state) { 
-        rgb_matrix_set_color_all(0, 0, 0); // turn off all LEDs when suspending
+void rgb_matrix_set_suspend_state(bool state) {
+    if (RGB_DISABLE_WHEN_USB_SUSPENDED && state) {
+        rgb_matrix_set_color_all(0, 0, 0);  // turn off all LEDs when suspending
     }
-    g_suspend_state = state; 
+    g_suspend_state = state;
 }
 
 void rgb_matrix_toggle(void) {
diff --git a/quantum/rgblight.c b/quantum/rgblight.c
index 141dc2e7b..26887f057 100644
--- a/quantum/rgblight.c
+++ b/quantum/rgblight.c
@@ -622,12 +622,12 @@ void rgblight_set(void) {
     start_led = led + clipping_start_pos;
 #    endif
 
-#ifdef RGBW
+#    ifdef RGBW
     for (uint8_t i = 0; i < num_leds; i++) {
         convert_rgb_to_rgbw(&start_led[i]);
     }
-#endif
-   ws2812_setleds(start_led, num_leds);
+#    endif
+    ws2812_setleds(start_led, num_leds);
 }
 #endif
 
diff --git a/quantum/via.c b/quantum/via.c
index 64b05324a..b3934d9f0 100644
--- a/quantum/via.c
+++ b/quantum/via.c
@@ -28,41 +28,36 @@
 #include "raw_hid.h"
 #include "dynamic_keymap.h"
 #include "tmk_core/common/eeprom.h"
-#include "version.h" // for QMK_BUILDDATE used in EEPROM magic
+#include "version.h"  // for QMK_BUILDDATE used in EEPROM magic
 
 // Can be called in an overriding via_init_kb() to test if keyboard level code usage of
 // EEPROM is invalid and use/save defaults.
-bool via_eeprom_is_valid(void)
-{
-    char *p = QMK_BUILDDATE; // e.g. "2019-11-05-11:29:54"
-    uint8_t magic0 = ( ( p[2] & 0x0F ) << 4 ) | ( p[3]  & 0x0F );
-    uint8_t magic1 = ( ( p[5] & 0x0F ) << 4 ) | ( p[6]  & 0x0F );
-    uint8_t magic2 = ( ( p[8] & 0x0F ) << 4 ) | ( p[9]  & 0x0F );
+bool via_eeprom_is_valid(void) {
+    char *  p      = QMK_BUILDDATE;  // e.g. "2019-11-05-11:29:54"
+    uint8_t magic0 = ((p[2] & 0x0F) << 4) | (p[3] & 0x0F);
+    uint8_t magic1 = ((p[5] & 0x0F) << 4) | (p[6] & 0x0F);
+    uint8_t magic2 = ((p[8] & 0x0F) << 4) | (p[9] & 0x0F);
 
-    return (eeprom_read_byte( (void*)VIA_EEPROM_MAGIC_ADDR+0 ) == magic0 &&
-            eeprom_read_byte( (void*)VIA_EEPROM_MAGIC_ADDR+1 ) == magic1 &&
-            eeprom_read_byte( (void*)VIA_EEPROM_MAGIC_ADDR+2 ) == magic2 );
+    return (eeprom_read_byte((void *)VIA_EEPROM_MAGIC_ADDR + 0) == magic0 && eeprom_read_byte((void *)VIA_EEPROM_MAGIC_ADDR + 1) == magic1 && eeprom_read_byte((void *)VIA_EEPROM_MAGIC_ADDR + 2) == magic2);
 }
 
 // Sets VIA/keyboard level usage of EEPROM to valid/invalid
 // Keyboard level code (eg. via_init_kb()) should not call this
-void via_eeprom_set_valid(bool valid)
-{
-    char *p = QMK_BUILDDATE; // e.g. "2019-11-05-11:29:54"
-    uint8_t magic0 = ( ( p[2] & 0x0F ) << 4 ) | ( p[3]  & 0x0F );
-    uint8_t magic1 = ( ( p[5] & 0x0F ) << 4 ) | ( p[6]  & 0x0F );
-    uint8_t magic2 = ( ( p[8] & 0x0F ) << 4 ) | ( p[9]  & 0x0F );
+void via_eeprom_set_valid(bool valid) {
+    char *  p      = QMK_BUILDDATE;  // e.g. "2019-11-05-11:29:54"
+    uint8_t magic0 = ((p[2] & 0x0F) << 4) | (p[3] & 0x0F);
+    uint8_t magic1 = ((p[5] & 0x0F) << 4) | (p[6] & 0x0F);
+    uint8_t magic2 = ((p[8] & 0x0F) << 4) | (p[9] & 0x0F);
 
-    eeprom_update_byte( (void*)VIA_EEPROM_MAGIC_ADDR+0, valid ? magic0 : 0xFF);
-    eeprom_update_byte( (void*)VIA_EEPROM_MAGIC_ADDR+1, valid ? magic1 : 0xFF);
-    eeprom_update_byte( (void*)VIA_EEPROM_MAGIC_ADDR+2, valid ? magic2 : 0xFF);
+    eeprom_update_byte((void *)VIA_EEPROM_MAGIC_ADDR + 0, valid ? magic0 : 0xFF);
+    eeprom_update_byte((void *)VIA_EEPROM_MAGIC_ADDR + 1, valid ? magic1 : 0xFF);
+    eeprom_update_byte((void *)VIA_EEPROM_MAGIC_ADDR + 2, valid ? magic2 : 0xFF);
 }
 
 // Flag QMK and VIA/keyboard level EEPROM as invalid.
 // Used in bootmagic_lite() and VIA command handler.
 // Keyboard level code should not need to call this.
-void via_eeprom_reset(void)
-{
+void via_eeprom_reset(void) {
     // Set the VIA specific EEPROM state as invalid.
     via_eeprom_set_valid(false);
     // Set the TMK/QMK EEPROM state as invalid.
@@ -72,8 +67,7 @@ void via_eeprom_reset(void)
 // Override bootmagic_lite() so it can flag EEPROM as invalid
 // as well as jump to bootloader, thus performing a "factory reset"
 // of dynamic keymaps and optionally backlight/other settings.
-void bootmagic_lite(void)
-{
+void bootmagic_lite(void) {
     // The lite version of TMK's bootmagic based on Wilba.
     // 100% less potential for accidentally making the
     // keyboard do stupid things.
@@ -106,12 +100,10 @@ void bootmagic_lite(void)
 // for backlight, rotary encoders, etc.
 // The override should not set via_eeprom_set_valid(true) as
 // the caller also needs to check the valid state.
-__attribute__((weak)) void via_init_kb(void) {
-}
+__attribute__((weak)) void via_init_kb(void) {}
 
 // Called by QMK core to initialize dynamic keymaps etc.
-void via_init(void)
-{
+void via_init(void) {
     // Let keyboard level test EEPROM valid state,
     // but not set it valid, it is done here.
     via_init_kb();
@@ -119,7 +111,7 @@ void via_init(void)
     // If the EEPROM has the magic, the data is good.
     // OK to load from EEPROM.
     if (via_eeprom_is_valid()) {
-    } else      {
+    } else {
         // This resets the layout options
         via_set_layout_options(0);
         // This resets the keymaps in EEPROM to what is in flash.
@@ -133,12 +125,11 @@ void via_init(void)
 
 // This is generalized so the layout options EEPROM usage can be
 // variable, between 1 and 4 bytes.
-uint32_t via_get_layout_options(void)
-{
+uint32_t via_get_layout_options(void) {
     uint32_t value = 0;
     // Start at the most significant byte
-    void * source = (void *)(VIA_EEPROM_LAYOUT_OPTIONS_ADDR);
-    for ( uint8_t i = 0; i < VIA_EEPROM_LAYOUT_OPTIONS_SIZE; i++ ) {
+    void *source = (void *)(VIA_EEPROM_LAYOUT_OPTIONS_ADDR);
+    for (uint8_t i = 0; i < VIA_EEPROM_LAYOUT_OPTIONS_SIZE; i++) {
         value = value << 8;
         value |= eeprom_read_byte(source);
         source++;
@@ -146,24 +137,21 @@ uint32_t via_get_layout_options(void)
     return value;
 }
 
-void via_set_layout_options(uint32_t value)
-{
+void via_set_layout_options(uint32_t value) {
     // Start at the least significant byte
-    void * target = (void *)(VIA_EEPROM_LAYOUT_OPTIONS_ADDR+VIA_EEPROM_LAYOUT_OPTIONS_SIZE-1);
-    for ( uint8_t i = 0; i < VIA_EEPROM_LAYOUT_OPTIONS_SIZE; i++ ) {
-        eeprom_update_byte(target, value & 0xFF );
+    void *target = (void *)(VIA_EEPROM_LAYOUT_OPTIONS_ADDR + VIA_EEPROM_LAYOUT_OPTIONS_SIZE - 1);
+    for (uint8_t i = 0; i < VIA_EEPROM_LAYOUT_OPTIONS_SIZE; i++) {
+        eeprom_update_byte(target, value & 0xFF);
         value = value >> 8;
         target--;
     }
 }
 
 // Called by QMK core to process VIA-specific keycodes.
-bool process_record_via(uint16_t keycode, keyrecord_t *record)
-{
+bool process_record_via(uint16_t keycode, keyrecord_t *record) {
     // Handle macros
     if (record->event.pressed) {
-        if ( keycode >= MACRO00 && keycode <= MACRO15 )
-        {
+        if (keycode >= MACRO00 && keycode <= MACRO15) {
             uint8_t id = keycode - MACRO00;
             dynamic_keymap_macro_send(id);
             return false;
@@ -173,7 +161,7 @@ bool process_record_via(uint16_t keycode, keyrecord_t *record)
     // TODO: ideally this would be generalized and refactored into
     // QMK core as advanced keycodes, until then, the simple case
     // can be available here to keyboards using VIA
-    switch(keycode) {
+    switch (keycode) {
         case FN_MO13:
             if (record->event.pressed) {
                 layer_on(1);
@@ -203,7 +191,7 @@ bool process_record_via(uint16_t keycode, keyrecord_t *record)
 // DO NOT call raw_hid_send() in the overide function.
 __attribute__((weak)) void raw_hid_receive_kb(uint8_t *data, uint8_t length) {
     uint8_t *command_id = &(data[0]);
-    *command_id = id_unhandled;
+    *command_id         = id_unhandled;
 }
 
 // VIA handles received HID messages first, and will route to
@@ -211,182 +199,151 @@ __attribute__((weak)) void raw_hid_receive_kb(uint8_t *data, uint8_t length) {
 // This gives the keyboard code level the ability to handle the command
 // specifically.
 //
-// raw_hid_send() is called at the end, with the same buffer, which was 
+// raw_hid_send() is called at the end, with the same buffer, which was
 // possibly modified with returned values.
-void raw_hid_receive( uint8_t *data, uint8_t length )
-{
-    uint8_t *command_id = &(data[0]);
+void raw_hid_receive(uint8_t *data, uint8_t length) {
+    uint8_t *command_id   = &(data[0]);
     uint8_t *command_data = &(data[1]);
-    switch ( *command_id )
-    {
-        case id_get_protocol_version:
-        {
+    switch (*command_id) {
+        case id_get_protocol_version: {
             command_data[0] = VIA_PROTOCOL_VERSION >> 8;
             command_data[1] = VIA_PROTOCOL_VERSION & 0xFF;
             break;
         }
-        case id_get_keyboard_value:
-        {
-            switch ( command_data[0] )
-            {
-                case id_uptime:
-                {
-                    uint32_t value = timer_read32();
-                    command_data[1] = (value >> 24 ) & 0xFF;
-                    command_data[2] = (value >> 16 ) & 0xFF;
-                    command_data[3] = (value >> 8 ) & 0xFF;
+        case id_get_keyboard_value: {
+            switch (command_data[0]) {
+                case id_uptime: {
+                    uint32_t value  = timer_read32();
+                    command_data[1] = (value >> 24) & 0xFF;
+                    command_data[2] = (value >> 16) & 0xFF;
+                    command_data[3] = (value >> 8) & 0xFF;
                     command_data[4] = value & 0xFF;
                     break;
                 }
-                case id_layout_options:
-                {
-                    uint32_t value = via_get_layout_options();
-                    command_data[1] = (value >> 24 ) & 0xFF;
-                    command_data[2] = (value >> 16 ) & 0xFF;
-                    command_data[3] = (value >> 8 ) & 0xFF;
+                case id_layout_options: {
+                    uint32_t value  = via_get_layout_options();
+                    command_data[1] = (value >> 24) & 0xFF;
+                    command_data[2] = (value >> 16) & 0xFF;
+                    command_data[3] = (value >> 8) & 0xFF;
                     command_data[4] = value & 0xFF;
                     break;
                 }
-                case id_switch_matrix_state:
-                {
-#if ( (MATRIX_COLS/8+1)*MATRIX_ROWS <= 28 )
+                case id_switch_matrix_state: {
+#if ((MATRIX_COLS / 8 + 1) * MATRIX_ROWS <= 28)
                     uint8_t i = 1;
-                    for ( uint8_t row=0; row<MATRIX_ROWS; row++ ) {
+                    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
                         matrix_row_t value = matrix_get_row(row);
-#if (MATRIX_COLS > 24)
-                        command_data[i++] = (value >> 24 ) & 0xFF;
-#endif
-#if (MATRIX_COLS > 16)
-                        command_data[i++] = (value >> 16 ) & 0xFF;
-#endif
-#if (MATRIX_COLS > 8)
-                        command_data[i++] = (value >> 8 ) & 0xFF;
-#endif
+#    if (MATRIX_COLS > 24)
+                        command_data[i++] = (value >> 24) & 0xFF;
+#    endif
+#    if (MATRIX_COLS > 16)
+                        command_data[i++] = (value >> 16) & 0xFF;
+#    endif
+#    if (MATRIX_COLS > 8)
+                        command_data[i++] = (value >> 8) & 0xFF;
+#    endif
                         command_data[i++] = value & 0xFF;
                     }
 #endif
                     break;
                 }
-                default:
-                {
-                    raw_hid_receive_kb(data,length);
+                default: {
+                    raw_hid_receive_kb(data, length);
                     break;
                 }
             }
             break;
         }
-        case id_set_keyboard_value:
-        {
-            switch ( command_data[0] )
-            {
-                case id_layout_options:
-                {
-                    uint32_t value = ( (uint32_t)command_data[1] << 24 ) |
-                                     ( (uint32_t)command_data[2] << 16 ) |
-                                     ( (uint32_t)command_data[3] << 8 ) |
-                                       (uint32_t)command_data[4];
+        case id_set_keyboard_value: {
+            switch (command_data[0]) {
+                case id_layout_options: {
+                    uint32_t value = ((uint32_t)command_data[1] << 24) | ((uint32_t)command_data[2] << 16) | ((uint32_t)command_data[3] << 8) | (uint32_t)command_data[4];
                     via_set_layout_options(value);
                     break;
                 }
-                default:
-                {
-                    raw_hid_receive_kb(data,length);
+                default: {
+                    raw_hid_receive_kb(data, length);
                     break;
                 }
             }
             break;
         }
-        case id_dynamic_keymap_get_keycode:
-        {
-            uint16_t keycode = dynamic_keymap_get_keycode( command_data[0], command_data[1], command_data[2] );
-            command_data[3] = keycode >> 8;
-            command_data[4] = keycode & 0xFF;
+        case id_dynamic_keymap_get_keycode: {
+            uint16_t keycode = dynamic_keymap_get_keycode(command_data[0], command_data[1], command_data[2]);
+            command_data[3]  = keycode >> 8;
+            command_data[4]  = keycode & 0xFF;
             break;
         }
-        case id_dynamic_keymap_set_keycode:
-        {
-            dynamic_keymap_set_keycode( command_data[0], command_data[1], command_data[2], ( command_data[3] << 8 ) | command_data[4] );
+        case id_dynamic_keymap_set_keycode: {
+            dynamic_keymap_set_keycode(command_data[0], command_data[1], command_data[2], (command_data[3] << 8) | command_data[4]);
             break;
         }
-        case id_dynamic_keymap_reset:
-        {
+        case id_dynamic_keymap_reset: {
             dynamic_keymap_reset();
             break;
         }
         case id_backlight_config_set_value:
         case id_backlight_config_get_value:
-        case id_backlight_config_save:
-        {
+        case id_backlight_config_save: {
             raw_hid_receive_kb(data, length);
             break;
         }
-        case id_dynamic_keymap_macro_get_count:
-        {
+        case id_dynamic_keymap_macro_get_count: {
             command_data[0] = dynamic_keymap_macro_get_count();
             break;
         }
-        case id_dynamic_keymap_macro_get_buffer_size:
-        {
-            uint16_t size = dynamic_keymap_macro_get_buffer_size();
+        case id_dynamic_keymap_macro_get_buffer_size: {
+            uint16_t size   = dynamic_keymap_macro_get_buffer_size();
             command_data[0] = size >> 8;
             command_data[1] = size & 0xFF;
             break;
         }
-        case id_dynamic_keymap_macro_get_buffer:
-        {
-            uint16_t offset = ( command_data[0] << 8 ) | command_data[1];
-            uint16_t size = command_data[2]; // size <= 28
-            dynamic_keymap_macro_get_buffer( offset, size, &command_data[3] );
+        case id_dynamic_keymap_macro_get_buffer: {
+            uint16_t offset = (command_data[0] << 8) | command_data[1];
+            uint16_t size   = command_data[2];  // size <= 28
+            dynamic_keymap_macro_get_buffer(offset, size, &command_data[3]);
             break;
         }
-        case id_dynamic_keymap_macro_set_buffer:
-        {
-            uint16_t offset = ( command_data[0] << 8 ) | command_data[1];
-            uint16_t size = command_data[2]; // size <= 28
-            dynamic_keymap_macro_set_buffer( offset, size, &command_data[3] );
+        case id_dynamic_keymap_macro_set_buffer: {
+            uint16_t offset = (command_data[0] << 8) | command_data[1];
+            uint16_t size   = command_data[2];  // size <= 28
+            dynamic_keymap_macro_set_buffer(offset, size, &command_data[3]);
             break;
         }
-        case id_dynamic_keymap_macro_reset:
-        {
+        case id_dynamic_keymap_macro_reset: {
             dynamic_keymap_macro_reset();
             break;
         }
-        case id_dynamic_keymap_get_layer_count:
-        {
+        case id_dynamic_keymap_get_layer_count: {
             command_data[0] = dynamic_keymap_get_layer_count();
             break;
         }
-        case id_dynamic_keymap_get_buffer:
-        {
-            uint16_t offset = ( command_data[0] << 8 ) | command_data[1];
-            uint16_t size = command_data[2]; // size <= 28
-            dynamic_keymap_get_buffer( offset, size, &command_data[3] );
+        case id_dynamic_keymap_get_buffer: {
+            uint16_t offset = (command_data[0] << 8) | command_data[1];
+            uint16_t size   = command_data[2];  // size <= 28
+            dynamic_keymap_get_buffer(offset, size, &command_data[3]);
             break;
         }
-        case id_dynamic_keymap_set_buffer:
-        {
-            uint16_t offset = ( command_data[0] << 8 ) | command_data[1];
-            uint16_t size = command_data[2]; // size <= 28
-            dynamic_keymap_set_buffer( offset, size, &command_data[3] );
+        case id_dynamic_keymap_set_buffer: {
+            uint16_t offset = (command_data[0] << 8) | command_data[1];
+            uint16_t size   = command_data[2];  // size <= 28
+            dynamic_keymap_set_buffer(offset, size, &command_data[3]);
             break;
         }
-        case id_eeprom_reset:
-        {
+        case id_eeprom_reset: {
             via_eeprom_reset();
             break;
         }
-        case id_bootloader_jump:
-        {
+        case id_bootloader_jump: {
             // Need to send data back before the jump
             // Informs host that the command is handled
-            raw_hid_send( data, length );
+            raw_hid_send(data, length);
             // Give host time to read it
             wait_ms(100);
             bootloader_jump();
             break;
         }
-        default:
-        {
+        default: {
             // The command ID is not known
             // Return the unhandled state
             *command_id = id_unhandled;
@@ -396,5 +353,5 @@ void raw_hid_receive( uint8_t *data, uint8_t length )
 
     // Return the same buffer, optionally with values changed
     // (i.e. returning state to the host, or the unhandled state).
-    raw_hid_send( data, length );
+    raw_hid_send(data, length);
 }
diff --git a/quantum/via.h b/quantum/via.h
index f9a8017b2..98f8dea8c 100644
--- a/quantum/via.h
+++ b/quantum/via.h
@@ -16,7 +16,7 @@
 
 #pragma once
 
-#include <tmk_core/common/eeconfig.h> // for EECONFIG_SIZE
+#include <tmk_core/common/eeconfig.h>  // for EECONFIG_SIZE
 
 // Keyboard level code can change where VIA stores the magic.
 // The magic is the build date YYMMDD encoded as BCD in 3 bytes,
@@ -25,34 +25,33 @@
 // The only reason this is important is in case EEPROM usage changes
 // and the EEPROM was not explicitly reset by bootmagic lite.
 #ifndef VIA_EEPROM_MAGIC_ADDR
-#   define VIA_EEPROM_MAGIC_ADDR (EECONFIG_SIZE)
+#    define VIA_EEPROM_MAGIC_ADDR (EECONFIG_SIZE)
 #endif
 
-#define VIA_EEPROM_LAYOUT_OPTIONS_ADDR (VIA_EEPROM_MAGIC_ADDR+3)
+#define VIA_EEPROM_LAYOUT_OPTIONS_ADDR (VIA_EEPROM_MAGIC_ADDR + 3)
 
 // Changing the layout options size after release will invalidate EEPROM,
 // but this is something that should be set correctly on initial implementation.
 // 1 byte is enough for most uses (i.e. 8 binary states, or 6 binary + 1 ternary/quaternary )
 #ifndef VIA_EEPROM_LAYOUT_OPTIONS_SIZE
-#   define VIA_EEPROM_LAYOUT_OPTIONS_SIZE 1
+#    define VIA_EEPROM_LAYOUT_OPTIONS_SIZE 1
 #endif
 
 // The end of the EEPROM memory used by VIA
 // By default, dynamic keymaps will start at this if there is no
 // custom config
-#define VIA_EEPROM_CUSTOM_CONFIG_ADDR (VIA_EEPROM_LAYOUT_OPTIONS_ADDR+VIA_EEPROM_LAYOUT_OPTIONS_SIZE)
+#define VIA_EEPROM_CUSTOM_CONFIG_ADDR (VIA_EEPROM_LAYOUT_OPTIONS_ADDR + VIA_EEPROM_LAYOUT_OPTIONS_SIZE)
 
 #ifndef VIA_EEPROM_CUSTOM_CONFIG_SIZE
-#   define VIA_EEPROM_CUSTOM_CONFIG_SIZE 0
+#    define VIA_EEPROM_CUSTOM_CONFIG_SIZE 0
 #endif
 
 // This is changed only when the command IDs change,
-// so VIA Configurator can detect compatible firmware. 
+// so VIA Configurator can detect compatible firmware.
 #define VIA_PROTOCOL_VERSION 0x0009
 
-enum via_command_id
-{
-    id_get_protocol_version = 0x01, // always 0x01
+enum via_command_id {
+    id_get_protocol_version = 0x01,  // always 0x01
     id_get_keyboard_value,
     id_set_keyboard_value,
     id_dynamic_keymap_get_keycode,
@@ -74,12 +73,7 @@ enum via_command_id
     id_unhandled = 0xFF,
 };
 
-enum via_keyboard_value_id
-{
-  id_uptime = 0x01,
-  id_layout_options,
-  id_switch_matrix_state
-};
+enum via_keyboard_value_id { id_uptime = 0x01, id_layout_options, id_switch_matrix_state };
 
 // Can't use SAFE_RANGE here, it might change if someone adds
 // new values to enum quantum_keycodes.
@@ -108,22 +102,22 @@ enum via_keycodes {
 };
 
 enum user_keycodes {
-  USER00 = 0x5F80,
-  USER01,
-  USER02,
-  USER03,
-  USER04,
-  USER05,
-  USER06,
-  USER07,
-  USER08,
-  USER09,
-  USER10,
-  USER11,
-  USER12,
-  USER13,
-  USER14,
-  USER15,
+    USER00 = 0x5F80,
+    USER01,
+    USER02,
+    USER03,
+    USER04,
+    USER05,
+    USER06,
+    USER07,
+    USER08,
+    USER09,
+    USER10,
+    USER11,
+    USER12,
+    USER13,
+    USER14,
+    USER15,
 };
 
 // Can be called in an overriding via_init_kb() to test if keyboard level code usage of
@@ -144,8 +138,7 @@ void via_init(void);
 
 // Used by VIA to store and retrieve the layout options.
 uint32_t via_get_layout_options(void);
-void via_set_layout_options(uint32_t value);
+void     via_set_layout_options(uint32_t value);
 
 // Called by QMK core to process VIA-specific keycodes.
 bool process_record_via(uint16_t keycode, keyrecord_t *record);
-
diff --git a/tmk_core/common/action.c b/tmk_core/common/action.c
index d6062703e..5dadba4fb 100644
--- a/tmk_core/common/action.c
+++ b/tmk_core/common/action.c
@@ -48,7 +48,7 @@ int retro_tapping_counter = 0;
 #endif
 
 #ifdef IGNORE_MOD_TAP_INTERRUPT_PER_KEY
-__attribute__ ((weak)) bool get_ignore_mod_tap_interrupt(uint16_t keycode) { return false; }
+__attribute__((weak)) bool get_ignore_mod_tap_interrupt(uint16_t keycode) { return false; }
 #endif
 
 #ifndef TAP_CODE_DELAY