Quark PCB for Planck/Preonic (#11206)

* Quark PCB for Planck/Preonic

Quark provides alternate bottom row layouts for both the OLKB Planck and Preonic

* Rename rules.mk.txt to rules.mk

* added Tapping Toggle

removed tapping toggle from keymap level

* Update info.json

took out } as requested

* update config.h

added GPL2+ license and #pragma once

* update info.json again

cleaned up syntax

* Apply suggestions from code review

Co-authored-by: Drashna Jaelre <drashna@live.com>

* update config.h

added GPL2+ License

* Update info.json - and again

fixed it - oops

Co-authored-by: Drashna Jaelre <drashna@live.com>

1 files changed, 75 insertions, 0 deletions

diff --git a/keyboards/quark/config.h b/keyboards/quark/config.h
new file mode 100644
index 000000000..084891b2c
--- /dev/null
+++ b/keyboards/quark/config.h
@@ -0,0 +1,75 @@
+/* Copyright 2015-2017 Jack Humbert
+ * Modified by Nasp for the Quark
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x7070
+#define PRODUCT_ID      0x5340
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Nasp
+#define PRODUCT         QUARK
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 12
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { C5, C4, C6, C7, B7 }
+#define MATRIX_COL_PINS { B4, B5, B6, B3, C2, B2, B1, D2, D3, D4, D5, D6 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+// ws2812 options
+#define RGB_DI_PIN D0 // pin the DI on the ws2812 is hooked-up to
+#define RGBLIGHT_ANIMATIONS // run RGB animations
+#define RGBLED_NUM 14 // number of LEDs
+#define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue
+#define RGBLIGHT_SAT_STEP 12 // units to step when in/decresing saturation
+#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness)
+
+#define TAPPING_TOGGLE 2