Merge commit 'a074364c3731d66b56d988c8a6c960a83ea0e0a1' as 'tmk_core'

1 files changed, 240 insertions, 0 deletions

diff --git a/tmk_core/protocol/serial_soft.c b/tmk_core/protocol/serial_soft.c
new file mode 100644
index 000000000..44822b7e4
--- /dev/null
+++ b/tmk_core/protocol/serial_soft.c
@@ -0,0 +1,240 @@
+/*
+Copyright 2012 Jun WAKO <wakojun@gmail.com>
+
+This software is licensed with a Modified BSD License.
+All of this is supposed to be Free Software, Open Source, DFSG-free,
+GPL-compatible, and OK to use in both free and proprietary applications.
+Additions and corrections to this file are welcome.
+
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright
+  notice, this list of conditions and the following disclaimer.
+
+* Redistributions in binary form must reproduce the above copyright
+  notice, this list of conditions and the following disclaimer in
+  the documentation and/or other materials provided with the
+  distribution.
+
+* Neither the name of the copyright holders nor the names of
+  contributors may be used to endorse or promote products derived
+  from this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#include <stdbool.h>
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include "serial.h"
+
+/*
+ *  Stupid Inefficient Busy-wait Software Serial
+ *  which is still useful for negative logic signal like Sun protocol
+ *  if it is not supported by hardware UART.
+ *
+ *  TODO: delay is not accurate enough. Instruction cycle should be counted and inline assemby is needed.
+ */
+
+#define WAIT_US     (1000000L/SERIAL_SOFT_BAUD)
+
+#ifdef SERIAL_SOFT_LOGIC_NEGATIVE
+    #define SERIAL_SOFT_RXD_IN()        !(SERIAL_SOFT_RXD_READ())
+    #define SERIAL_SOFT_TXD_ON()        SERIAL_SOFT_TXD_LO()
+    #define SERIAL_SOFT_TXD_OFF()       SERIAL_SOFT_TXD_HI()
+#else
+    #define SERIAL_SOFT_RXD_IN()        !!(SERIAL_SOFT_RXD_READ())
+    #define SERIAL_SOFT_TXD_ON()        SERIAL_SOFT_TXD_HI()
+    #define SERIAL_SOFT_TXD_OFF()       SERIAL_SOFT_TXD_LO()
+#endif
+
+#ifdef SERIAL_SOFT_PARITY_EVEN
+    #define SERIAL_SOFT_PARITY_VAL      0
+#elif defined(SERIAL_SOFT_PARITY_ODD)
+    #define SERIAL_SOFT_PARITY_VAL      1
+#endif
+
+/* debug for signal timing, see debug pin with oscilloscope */
+#define SERIAL_SOFT_DEBUG
+#ifdef SERIAL_SOFT_DEBUG
+    #define SERIAL_SOFT_DEBUG_INIT()    (DDRD |= 1<<7)
+    #define SERIAL_SOFT_DEBUG_TGL()     (PORTD ^= 1<<7)
+#else
+    #define SERIAL_SOFT_DEBUG_INIT()
+    #define SERIAL_SOFT_DEBUG_TGL()
+#endif
+
+
+void serial_init(void)
+{
+    SERIAL_SOFT_DEBUG_INIT();
+
+    SERIAL_SOFT_RXD_INIT();
+    SERIAL_SOFT_TXD_INIT();
+}
+
+/* RX ring buffer */
+#define RBUF_SIZE   8
+static uint8_t rbuf[RBUF_SIZE];
+static uint8_t rbuf_head = 0;
+static uint8_t rbuf_tail = 0;
+
+
+uint8_t serial_recv(void)
+{
+    uint8_t data = 0;
+    if (rbuf_head == rbuf_tail) {
+        return 0;
+    }
+
+    data = rbuf[rbuf_tail];
+    rbuf_tail = (rbuf_tail + 1) % RBUF_SIZE;
+    return data;
+}
+
+int16_t serial_recv2(void)
+{
+    uint8_t data = 0;
+    if (rbuf_head == rbuf_tail) {
+        return -1;
+    }
+
+    data = rbuf[rbuf_tail];
+    rbuf_tail = (rbuf_tail + 1) % RBUF_SIZE;
+    return data;
+}
+
+void serial_send(uint8_t data)
+{
+    /* signal state: IDLE: ON, START: OFF, STOP: ON, DATA0: OFF, DATA1: ON */
+
+#ifdef SERIAL_SOFT_BIT_ORDER_MSB
+    #ifdef SERIAL_SOFT_DATA_7BIT
+    uint8_t mask = 0x40;
+    #else
+    uint8_t mask = 0x80;
+    #endif
+#else
+    uint8_t mask = 0x01;
+#endif
+
+    uint8_t parity = 0;
+
+    /* start bit */
+    SERIAL_SOFT_TXD_OFF();
+    _delay_us(WAIT_US);
+
+#ifdef SERIAL_SOFT_DATA_7BIT
+    while (mask&0x7F) {
+#else
+    while (mask&0xFF) {
+#endif
+        if (data&mask) {
+            SERIAL_SOFT_TXD_ON();
+            parity ^= 1;
+        } else {
+            SERIAL_SOFT_TXD_OFF();
+        }
+        _delay_us(WAIT_US);
+
+#ifdef SERIAL_SOFT_BIT_ORDER_MSB
+        mask >>= 1;
+#else
+        mask <<= 1;
+#endif
+    }
+
+#if defined(SERIAL_SOFT_PARITY_EVEN) || defined(SERIAL_SOFT_PARITY_ODD)
+    /* to center of parity bit */
+    if (parity != SERIAL_SOFT_PARITY_VAL) {
+        SERIAL_SOFT_TXD_ON();
+    } else {
+        SERIAL_SOFT_TXD_OFF();
+    }
+    _delay_us(WAIT_US);
+#endif
+
+    /* stop bit */
+    SERIAL_SOFT_TXD_ON();
+    _delay_us(WAIT_US);
+}
+
+/* detect edge of start bit */
+ISR(SERIAL_SOFT_RXD_VECT)
+{
+    SERIAL_SOFT_DEBUG_TGL();
+    SERIAL_SOFT_RXD_INT_ENTER()
+
+    uint8_t data = 0;
+
+#ifdef SERIAL_SOFT_BIT_ORDER_MSB
+    #ifdef SERIAL_SOFT_DATA_7BIT
+    uint8_t mask = 0x40;
+    #else
+    uint8_t mask = 0x80;
+    #endif
+#else
+    uint8_t mask = 0x01;
+#endif
+
+    uint8_t parity = 0;
+
+    /* to center of start bit */
+    _delay_us(WAIT_US/2);
+    SERIAL_SOFT_DEBUG_TGL();
+    do {
+        /* to center of next bit */
+        _delay_us(WAIT_US);
+
+    SERIAL_SOFT_DEBUG_TGL();
+        if (SERIAL_SOFT_RXD_IN()) {
+            data |= mask;
+            parity ^= 1;
+        }
+#ifdef SERIAL_SOFT_BIT_ORDER_MSB
+        mask >>= 1;
+#else
+        mask <<= 1;
+#endif
+#ifdef SERIAL_SOFT_DATA_7BIT
+    } while (mask&0x7F);
+#else
+    } while (mask&0xFF);
+#endif
+
+#if defined(SERIAL_SOFT_PARITY_EVEN) || defined(SERIAL_SOFT_PARITY_ODD)
+    /* to center of parity bit */
+    _delay_us(WAIT_US);
+    if (SERIAL_SOFT_RXD_IN()) { parity ^= 1; }
+    SERIAL_SOFT_DEBUG_TGL();
+#endif
+
+    /* to center of stop bit */
+    _delay_us(WAIT_US);
+
+    uint8_t next = (rbuf_head + 1) % RBUF_SIZE;
+#if defined(SERIAL_SOFT_PARITY_EVEN) || defined(SERIAL_SOFT_PARITY_ODD)
+    if ((parity == SERIAL_SOFT_PARITY_VAL) && next != rbuf_tail) {
+#else
+    if (next != rbuf_tail) {
+#endif
+        rbuf[rbuf_head] = data;
+        rbuf_head = next;
+    }
+
+    SERIAL_SOFT_RXD_INT_EXIT();
+    SERIAL_SOFT_DEBUG_TGL();
+}