added protocol stack: pjrc, vusb

1 files changed, 0 insertions, 98 deletions

diff --git a/usb.h b/usb.h
deleted file mode 100644
index 85e0e33df..000000000
--- a/usb.h
+++ /dev/null
@@ -1,98 +0,0 @@
-#ifndef USB_H
-#define  USB_H 1
-
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-
-
-extern bool remote_wakeup;
-extern bool suspend;
-
-void usb_init(void);                    // initialize everything
-uint8_t usb_configured(void);           // is the USB port configured
-void usb_remote_wakeup(void);
-
-
-
-
-#define EP_TYPE_CONTROL                 0x00
-#define EP_TYPE_BULK_IN                 0x81
-#define EP_TYPE_BULK_OUT                0x80
-#define EP_TYPE_INTERRUPT_IN            0xC1
-#define EP_TYPE_INTERRUPT_OUT           0xC0
-#define EP_TYPE_ISOCHRONOUS_IN          0x41
-#define EP_TYPE_ISOCHRONOUS_OUT         0x40
-
-#define EP_SINGLE_BUFFER                0x02
-#define EP_DOUBLE_BUFFER                0x06
-
-#define EP_SIZE(s)      ((s) == 64 ? 0x30 :     \
-                        ((s) == 32 ? 0x20 :     \
-                        ((s) == 16 ? 0x10 :     \
-                                     0x00)))
-
-#define MAX_ENDPOINT            4
-
-#define LSB(n) (n & 255)
-#define MSB(n) ((n >> 8) & 255)
-
-#if defined(__AVR_AT90USB162__)
-#define HW_CONFIG() 
-#define PLL_CONFIG() (PLLCSR = ((1<<PLLE)|(1<<PLLP0)))
-#define USB_CONFIG() (USBCON = (1<<USBE))
-#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
-#elif defined(__AVR_ATmega32U4__)
-#define HW_CONFIG() (UHWCON = 0x01)
-#define PLL_CONFIG() (PLLCSR = 0x12)
-#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE)))
-#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
-#elif defined(__AVR_AT90USB646__)
-#define HW_CONFIG() (UHWCON = 0x81)
-#define PLL_CONFIG() (PLLCSR = 0x1A)
-#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE)))
-#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
-#elif defined(__AVR_AT90USB1286__)
-#define HW_CONFIG() (UHWCON = 0x81)
-#define PLL_CONFIG() (PLLCSR = 0x16)
-#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE)))
-#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
-#endif
-
-// standard control endpoint request types
-#define GET_STATUS                      0
-#define CLEAR_FEATURE                   1
-#define SET_FEATURE                     3
-#define SET_ADDRESS                     5
-#define GET_DESCRIPTOR                  6
-#define GET_CONFIGURATION               8
-#define SET_CONFIGURATION               9
-#define GET_INTERFACE                   10
-#define SET_INTERFACE                   11
-// HID (human interface device)
-#define HID_GET_REPORT                  1
-#define HID_GET_IDLE                    2
-#define HID_GET_PROTOCOL                3
-#define HID_SET_REPORT                  9
-#define HID_SET_IDLE                    10
-#define HID_SET_PROTOCOL                11
-#define HID_REPORT_INPUT                1
-#define HID_REPORT_OUTPUT               2
-#define HID_REPORT_FEATURE              3
-// CDC (communication class device)
-#define CDC_SET_LINE_CODING             0x20
-#define CDC_GET_LINE_CODING             0x21
-#define CDC_SET_CONTROL_LINE_STATE      0x22
-// HID feature selectors
-#define DEVICE_REMOTE_WAKEUP            1
-#define ENDPOINT_HALT                   0
-#define TEST_MODE                       2
-
-// LEDS
-#define USB_LED_NUM_LOCK                0
-#define USB_LED_CAPS_LOCK               1
-#define USB_LED_SCROLL_LOCK             2
-#define USB_LED_COMPOSE                 3
-#define USB_LED_KANA                    4
-
-#endif