Added SHARP X68000 keyboard support.

1 files changed, 66 insertions, 0 deletions

diff --git a/x68k_usb/config_pjrc.h b/x68k_usb/config_pjrc.h
new file mode 100644
index 000000000..20758bf24
--- /dev/null
+++ b/x68k_usb/config_pjrc.h
@@ -0,0 +1,66 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+/* controller configuration */
+#include "controller_teensy.h"
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6800
+#define MANUFACTURER    t.m.k.
+#define PRODUCT         SHARP X68000 keyboard converter
+#define DESCRIPTION     converts SHARP X68000 keyboard protocol into USB
+
+
+/* matrix size */
+#define MATRIX_ROWS 16
+#define MATRIX_COLS 8
+
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KB_LALT) | MOD_BIT(KB_RALT)) || \
+    keyboard_report->mods == (MOD_BIT(KB_LCTRL) | MOD_BIT(KB_RSHIFT)) \
+)
+
+
+/* mouse keys */
+#ifdef MOUSEKEY_ENABLE
+#   define MOUSEKEY_DELAY_TIME 255
+#endif
+
+
+/* USART configuration
+ *     asynchronous, 2400baud, 8-data bit, non parity, 1-stop bit, no flow control
+ */
+#ifdef __AVR_ATmega32U4__
+#   define KBD_RX_VECT        USART1_RX_vect
+#   define KBD_RX_DATA        UDR1
+#   define KBD_RX_BAUD        2400
+#   define KBD_RX_UBBR        ((F_CPU/(16UL*KBD_RX_BAUD))-1)
+#   define KBD_RX_INIT()      do { \
+        UBRR1L = (uint8_t) KBD_RX_UBBR; \
+        UBRR1H = (uint8_t) (KBD_RX_UBBR>>8); \
+        UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); \
+    } while(0)
+#else
+#   error "USART configuration is needed."
+#endif
+
+#endif