1 files changed, 14 insertions, 4 deletions

diff --git a/keyboards/ergodox/readme.md b/keyboards/ergodox/readme.md
index ca3eeba59..d7eed8f43 100644
--- a/keyboards/ergodox/readme.md
+++ b/keyboards/ergodox/readme.md
@@ -1,6 +1,6 @@
 # The Easy Way
 
-If you have an ErgoDox EZ, the absolute easiest way for you to customize your firmware is using the [graphical configurator](http://configure.ergodox-ez.com), which uses QMK under the hood. 
+If you have an ErgoDox EZ, the absolute easiest way for you to customize your firmware is using the [graphical configurator](http://configure.ergodox-ez.com), which uses QMK under the hood.
 
 If you can find firmware someone else has made that does what you want, that
 is the easiest way to customize your ErgoDox.  It requires no programming
@@ -69,12 +69,13 @@ files.  Check them out with:
 
 The Ez uses the [Teensy Loader](https://www.pjrc.com/teensy/loader.html).
 
-Linux users need to modify udev rules as described on the Teensy Linux page.
-Some distributions provide a binary, maybe called `teensy-loader-cli`).
+Linux users need to modify udev rules as described on the Teensy Linux page (which page?).
+Some distributions provide a binary, maybe called `teensy-loader-cli`.
 
 To flash the firmware:
 
-  - Build the firmware with `make keymapname`, for example `make default` 
+  - Build the firmware with `make keymapname`, for example `make default`
+
   - This will result in a hex file called `ergodox_ez_keymapname.hex`, e.g.
     `ergodox_ez_default.hex`
 
@@ -87,6 +88,15 @@ To flash the firmware:
 
   - Click the button in the Teensy app to download the firmware.
 
+To flash with ´teensy-loader-cli´:
+
+  - Build the firmware with `make keymapname`, for example `make default`
+
+  - Run ´<path/to/>teensy_loader_cli --mcu=atmega32u4 -w ergodox_ez_<keymap>.hex´
+
+  - Press the Reset button by inserting a paperclip gently into the reset hole
+    in the top right corder.
+
 ## ErgoDox Infinity
 
 The Infinity is two completely independent keyboards, and needs to be flashed