aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--keyboards/retro_75/chconf.h524
-rw-r--r--keyboards/retro_75/config.h249
-rw-r--r--keyboards/retro_75/halconf.h353
-rw-r--r--keyboards/retro_75/info.json15
-rw-r--r--keyboards/retro_75/keymaps/default/keymap.c22
-rw-r--r--keyboards/retro_75/keymaps/split_backspace/keymap.c22
-rw-r--r--keyboards/retro_75/mcuconf.h171
-rw-r--r--keyboards/retro_75/readme.md15
-rw-r--r--keyboards/retro_75/retro_75.c1
-rw-r--r--keyboards/retro_75/retro_75.h61
-rw-r--r--keyboards/retro_75/rules.mk54
11 files changed, 1487 insertions, 0 deletions
diff --git a/keyboards/retro_75/chconf.h b/keyboards/retro_75/chconf.h
new file mode 100644
index 000000000..99fa8ce39
--- /dev/null
+++ b/keyboards/retro_75/chconf.h
@@ -0,0 +1,524 @@
1/*
2 ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
3
4 Licensed under the Apache License, Version 2.0 (the "License");
5 you may not use this file except in compliance with the License.
6 You may obtain a copy of the License at
7
8 http://www.apache.org/licenses/LICENSE-2.0
9
10 Unless required by applicable law or agreed to in writing, software
11 distributed under the License is distributed on an "AS IS" BASIS,
12 WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 See the License for the specific language governing permissions and
14 limitations under the License.
15*/
16
17/**
18 * @file templates/chconf.h
19 * @brief Configuration file template.
20 * @details A copy of this file must be placed in each project directory, it
21 * contains the application specific kernel settings.
22 *
23 * @addtogroup config
24 * @details Kernel related settings and hooks.
25 * @{
26 */
27
28#ifndef CHCONF_H
29#define CHCONF_H
30
31#define _CHIBIOS_RT_CONF_
32
33/*===========================================================================*/
34/**
35 * @name System timers settings
36 * @{
37 */
38/*===========================================================================*/
39
40/**
41 * @brief System time counter resolution.
42 * @note Allowed values are 16 or 32 bits.
43 */
44#define CH_CFG_ST_RESOLUTION 32
45
46/**
47 * @brief System tick frequency.
48 * @details Frequency of the system timer that drives the system ticks. This
49 * setting also defines the system tick time unit.
50 */
51#define CH_CFG_ST_FREQUENCY 10000
52
53/**
54 * @brief Time delta constant for the tick-less mode.
55 * @note If this value is zero then the system uses the classic
56 * periodic tick. This value represents the minimum number
57 * of ticks that is safe to specify in a timeout directive.
58 * The value one is not valid, timeouts are rounded up to
59 * this value.
60 */
61#define CH_CFG_ST_TIMEDELTA 2
62
63/** @} */
64
65/*===========================================================================*/
66/**
67 * @name Kernel parameters and options
68 * @{
69 */
70/*===========================================================================*/
71
72/**
73 * @brief Round robin interval.
74 * @details This constant is the number of system ticks allowed for the
75 * threads before preemption occurs. Setting this value to zero
76 * disables the preemption for threads with equal priority and the
77 * round robin becomes cooperative. Note that higher priority
78 * threads can still preempt, the kernel is always preemptive.
79 * @note Disabling the round robin preemption makes the kernel more compact
80 * and generally faster.
81 * @note The round robin preemption is not supported in tickless mode and
82 * must be set to zero in that case.
83 */
84#define CH_CFG_TIME_QUANTUM 0
85
86/**
87 * @brief Managed RAM size.
88 * @details Size of the RAM area to be managed by the OS. If set to zero
89 * then the whole available RAM is used. The core memory is made
90 * available to the heap allocator and/or can be used directly through
91 * the simplified core memory allocator.
92 *
93 * @note In order to let the OS manage the whole RAM the linker script must
94 * provide the @p __heap_base__ and @p __heap_end__ symbols.
95 * @note Requires @p CH_CFG_USE_MEMCORE.
96 */
97#define CH_CFG_MEMCORE_SIZE 0
98
99/**
100 * @brief Idle thread automatic spawn suppression.
101 * @details When this option is activated the function @p chSysInit()
102 * does not spawn the idle thread. The application @p main()
103 * function becomes the idle thread and must implement an
104 * infinite loop.
105 */
106#define CH_CFG_NO_IDLE_THREAD FALSE
107
108/* Use __WFI in the idle thread for waiting. Does lower the power
109 * consumption. */
110#define CORTEX_ENABLE_WFI_IDLE TRUE
111
112/** @} */
113
114/*===========================================================================*/
115/**
116 * @name Performance options
117 * @{
118 */
119/*===========================================================================*/
120
121/**
122 * @brief OS optimization.
123 * @details If enabled then time efficient rather than space efficient code
124 * is used when two possible implementations exist.
125 *
126 * @note This is not related to the compiler optimization options.
127 * @note The default is @p TRUE.
128 */
129#define CH_CFG_OPTIMIZE_SPEED FALSE
130
131/** @} */
132
133/*===========================================================================*/
134/**
135 * @name Subsystem options
136 * @{
137 */
138/*===========================================================================*/
139
140/**
141 * @brief Time Measurement APIs.
142 * @details If enabled then the time measurement APIs are included in
143 * the kernel.
144 *
145 * @note The default is @p TRUE.
146 */
147#define CH_CFG_USE_TM FALSE
148
149/**
150 * @brief Threads registry APIs.
151 * @details If enabled then the registry APIs are included in the kernel.
152 *
153 * @note The default is @p TRUE.
154 */
155#define CH_CFG_USE_REGISTRY TRUE
156
157/**
158 * @brief Threads synchronization APIs.
159 * @details If enabled then the @p chThdWait() function is included in
160 * the kernel.
161 *
162 * @note The default is @p TRUE.
163 */
164#define CH_CFG_USE_WAITEXIT TRUE
165
166/**
167 * @brief Semaphores APIs.
168 * @details If enabled then the Semaphores APIs are included in the kernel.
169 *
170 * @note The default is @p TRUE.
171 */
172#define CH_CFG_USE_SEMAPHORES TRUE
173
174/**
175 * @brief Semaphores queuing mode.
176 * @details If enabled then the threads are enqueued on semaphores by
177 * priority rather than in FIFO order.
178 *
179 * @note The default is @p FALSE. Enable this if you have special
180 * requirements.
181 * @note Requires @p CH_CFG_USE_SEMAPHORES.
182 */
183#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
184
185/**
186 * @brief Mutexes APIs.
187 * @details If enabled then the mutexes APIs are included in the kernel.
188 *
189 * @note The default is @p TRUE.
190 */
191#define CH_CFG_USE_MUTEXES TRUE
192
193/**
194 * @brief Enables recursive behavior on mutexes.
195 * @note Recursive mutexes are heavier and have an increased
196 * memory footprint.
197 *
198 * @note The default is @p FALSE.
199 * @note Requires @p CH_CFG_USE_MUTEXES.
200 */
201#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
202
203/**
204 * @brief Conditional Variables APIs.
205 * @details If enabled then the conditional variables APIs are included
206 * in the kernel.
207 *
208 * @note The default is @p TRUE.
209 * @note Requires @p CH_CFG_USE_MUTEXES.
210 */
211#define CH_CFG_USE_CONDVARS TRUE
212
213/**
214 * @brief Conditional Variables APIs with timeout.
215 * @details If enabled then the conditional variables APIs with timeout
216 * specification are included in the kernel.
217 *
218 * @note The default is @p TRUE.
219 * @note Requires @p CH_CFG_USE_CONDVARS.
220 */
221#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE
222
223/**
224 * @brief Events Flags APIs.
225 * @details If enabled then the event flags APIs are included in the kernel.
226 *
227 * @note The default is @p TRUE.
228 */
229#define CH_CFG_USE_EVENTS TRUE
230
231/**
232 * @brief Events Flags APIs with timeout.
233 * @details If enabled then the events APIs with timeout specification
234 * are included in the kernel.
235 *
236 * @note The default is @p TRUE.
237 * @note Requires @p CH_CFG_USE_EVENTS.
238 */
239#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
240
241/**
242 * @brief Synchronous Messages APIs.
243 * @details If enabled then the synchronous messages APIs are included
244 * in the kernel.
245 *
246 * @note The default is @p TRUE.
247 */
248#define CH_CFG_USE_MESSAGES TRUE
249
250/**
251 * @brief Synchronous Messages queuing mode.
252 * @details If enabled then messages are served by priority rather than in
253 * FIFO order.
254 *
255 * @note The default is @p FALSE. Enable this if you have special
256 * requirements.
257 * @note Requires @p CH_CFG_USE_MESSAGES.
258 */
259#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
260
261/**
262 * @brief Mailboxes APIs.
263 * @details If enabled then the asynchronous messages (mailboxes) APIs are
264 * included in the kernel.
265 *
266 * @note The default is @p TRUE.
267 * @note Requires @p CH_CFG_USE_SEMAPHORES.
268 */
269#define CH_CFG_USE_MAILBOXES TRUE
270
271/**
272 * @brief Core Memory Manager APIs.
273 * @details If enabled then the core memory manager APIs are included
274 * in the kernel.
275 *
276 * @note The default is @p TRUE.
277 */
278#define CH_CFG_USE_MEMCORE FALSE
279
280/**
281 * @brief Heap Allocator APIs.
282 * @details If enabled then the memory heap allocator APIs are included
283 * in the kernel.
284 *
285 * @note The default is @p TRUE.
286 * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
287 * @p CH_CFG_USE_SEMAPHORES.
288 * @note Mutexes are recommended.
289 */
290#define CH_CFG_USE_HEAP FALSE
291
292/**
293 * @brief Memory Pools Allocator APIs.
294 * @details If enabled then the memory pools allocator APIs are included
295 * in the kernel.
296 *
297 * @note The default is @p TRUE.
298 */
299#define CH_CFG_USE_MEMPOOLS FALSE
300
301/**
302 * @brief Dynamic Threads APIs.
303 * @details If enabled then the dynamic threads creation APIs are included
304 * in the kernel.
305 *
306 * @note The default is @p TRUE.
307 * @note Requires @p CH_CFG_USE_WAITEXIT.
308 * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
309 */
310#define CH_CFG_USE_DYNAMIC FALSE
311
312/** @} */
313
314/*===========================================================================*/
315/**
316 * @name Debug options
317 * @{
318 */
319/*===========================================================================*/
320
321/**
322 * @brief Debug option, kernel statistics.
323 *
324 * @note The default is @p FALSE.
325 */
326#define CH_DBG_STATISTICS FALSE
327
328/**
329 * @brief Debug option, system state check.
330 * @details If enabled the correct call protocol for system APIs is checked
331 * at runtime.
332 *
333 * @note The default is @p FALSE.
334 */
335#define CH_DBG_SYSTEM_STATE_CHECK FALSE
336
337/**
338 * @brief Debug option, parameters checks.
339 * @details If enabled then the checks on the API functions input
340 * parameters are activated.
341 *
342 * @note The default is @p FALSE.
343 */
344#define CH_DBG_ENABLE_CHECKS FALSE
345
346/**
347 * @brief Debug option, consistency checks.
348 * @details If enabled then all the assertions in the kernel code are
349 * activated. This includes consistency checks inside the kernel,
350 * runtime anomalies and port-defined checks.
351 *
352 * @note The default is @p FALSE.
353 */
354#define CH_DBG_ENABLE_ASSERTS FALSE
355
356/**
357 * @brief Debug option, trace buffer.
358 * @details If enabled then the trace buffer is activated.
359 *
360 * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
361 */
362#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
363
364/**
365 * @brief Trace buffer entries.
366 * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
367 * different from @p CH_DBG_TRACE_MASK_DISABLED.
368 */
369#define CH_DBG_TRACE_BUFFER_SIZE 128
370
371/**
372 * @brief Debug option, stack checks.
373 * @details If enabled then a runtime stack check is performed.
374 *
375 * @note The default is @p FALSE.
376 * @note The stack check is performed in a architecture/port dependent way.
377 * It may not be implemented or some ports.
378 * @note The default failure mode is to halt the system with the global
379 * @p panic_msg variable set to @p NULL.
380 */
381#define CH_DBG_ENABLE_STACK_CHECK FALSE
382
383/**
384 * @brief Debug option, stacks initialization.
385 * @details If enabled then the threads working area is filled with a byte
386 * value when a thread is created. This can be useful for the
387 * runtime measurement of the used stack.
388 *
389 * @note The default is @p FALSE.
390 */
391#define CH_DBG_FILL_THREADS FALSE
392
393/**
394 * @brief Debug option, threads profiling.
395 * @details If enabled then a field is added to the @p thread_t structure that
396 * counts the system ticks occurred while executing the thread.
397 *
398 * @note The default is @p FALSE.
399 * @note This debug option is not currently compatible with the
400 * tickless mode.
401 */
402#define CH_DBG_THREADS_PROFILING FALSE
403
404/** @} */
405
406/*===========================================================================*/
407/**
408 * @name Kernel hooks
409 * @{
410 */
411/*===========================================================================*/
412
413/**
414 * @brief Threads descriptor structure extension.
415 * @details User fields added to the end of the @p thread_t structure.
416 */
417#define CH_CFG_THREAD_EXTRA_FIELDS \
418 /* Add threads custom fields here.*/
419
420/**
421 * @brief Threads initialization hook.
422 * @details User initialization code added to the @p chThdInit() API.
423 *
424 * @note It is invoked from within @p chThdInit() and implicitly from all
425 * the threads creation APIs.
426 */
427#define CH_CFG_THREAD_INIT_HOOK(tp) { \
428 /* Add threads initialization code here.*/ \
429}
430
431/**
432 * @brief Threads finalization hook.
433 * @details User finalization code added to the @p chThdExit() API.
434 */
435#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
436 /* Add threads finalization code here.*/ \
437}
438
439/**
440 * @brief Context switch hook.
441 * @details This hook is invoked just before switching between threads.
442 */
443#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
444 /* Context switch code here.*/ \
445}
446
447/**
448 * @brief ISR enter hook.
449 */
450#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
451 /* IRQ prologue code here.*/ \
452}
453
454/**
455 * @brief ISR exit hook.
456 */
457#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
458 /* IRQ epilogue code here.*/ \
459}
460
461/**
462 * @brief Idle thread enter hook.
463 * @note This hook is invoked within a critical zone, no OS functions
464 * should be invoked from here.
465 * @note This macro can be used to activate a power saving mode.
466 */
467#define CH_CFG_IDLE_ENTER_HOOK() { \
468 /* Idle-enter code here.*/ \
469}
470
471/**
472 * @brief Idle thread leave hook.
473 * @note This hook is invoked within a critical zone, no OS functions
474 * should be invoked from here.
475 * @note This macro can be used to deactivate a power saving mode.
476 */
477#define CH_CFG_IDLE_LEAVE_HOOK() { \
478 /* Idle-leave code here.*/ \
479}
480
481/**
482 * @brief Idle Loop hook.
483 * @details This hook is continuously invoked by the idle thread loop.
484 */
485#define CH_CFG_IDLE_LOOP_HOOK() { \
486 /* Idle loop code here.*/ \
487}
488
489/**
490 * @brief System tick event hook.
491 * @details This hook is invoked in the system tick handler immediately
492 * after processing the virtual timers queue.
493 */
494#define CH_CFG_SYSTEM_TICK_HOOK() { \
495 /* System tick event code here.*/ \
496}
497
498/**
499 * @brief System halt hook.
500 * @details This hook is invoked in case to a system halting error before
501 * the system is halted.
502 */
503#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
504 /* System halt code here.*/ \
505}
506
507/**
508 * @brief Trace hook.
509 * @details This hook is invoked each time a new record is written in the
510 * trace buffer.
511 */
512#define CH_CFG_TRACE_HOOK(tep) { \
513 /* Trace code here.*/ \
514}
515
516/** @} */
517
518/*===========================================================================*/
519/* Port-specific settings (override port settings defaulted in chcore.h). */
520/*===========================================================================*/
521
522#endif /* CHCONF_H */
523
524/** @} */
diff --git a/keyboards/retro_75/config.h b/keyboards/retro_75/config.h
new file mode 100644
index 000000000..a6b8ec672
--- /dev/null
+++ b/keyboards/retro_75/config.h
@@ -0,0 +1,249 @@
1/*
2Copyright 2019 zvecr<git@zvecr.com>
3
4This program is free software: you can redistribute it and/or modify
5it under the terms of the GNU General Public License as published by
6the Free Software Foundation, either version 2 of the License, or
7(at your option) any later version.
8
9This program is distributed in the hope that it will be useful,
10but WITHOUT ANY WARRANTY; without even the implied warranty of
11MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12GNU General Public License for more details.
13
14You should have received a copy of the GNU General Public License
15along with this program. If not, see <http://www.gnu.org/licenses/>.
16*/
17
18#pragma once
19
20#include "config_common.h"
21
22/* USB Device descriptor parameter */
23#define VENDOR_ID 0xFEED
24#define PRODUCT_ID 0x5275
25#define DEVICE_VER 0x0001
26#define MANUFACTURER PheonixStarr
27#define PRODUCT Retro75
28#define DESCRIPTION A custom 75% keyboard
29
30/* key matrix size */
31#define MATRIX_ROWS 6
32#define MATRIX_COLS 16
33
34/*
35 * Keyboard Matrix Assignments
36 *
37 * Change this to how you wired your keyboard
38 * COLS: AVR pins used for columns, left to right
39 * ROWS: AVR pins used for rows, top to bottom
40 * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
41 * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
42 *
43 */
44#define MATRIX_ROW_PINS { A8, B15, B14, B13, B12, B8 }
45#define MATRIX_COL_PINS { A5, A4, A3, F0, C15, C14, C13, A6, B11, B10, B2, B1, B0, A7, A14, A15 }
46#define UNUSED_PINS
47
48/* COL2ROW, ROW2COL*/
49#define DIODE_DIRECTION COL2ROW
50
51/*
52 * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
53 */
54//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
55
56// #define BACKLIGHT_PIN B7
57// #define BACKLIGHT_BREATHING
58// #define BACKLIGHT_LEVELS 3
59
60#define RGB_DI_PIN A9
61// #ifdef RGB_DI_PIN
62#define RGBLED_NUM 18
63// #define RGBLIGHT_HUE_STEP 8
64// #define RGBLIGHT_SAT_STEP 8
65// #define RGBLIGHT_VAL_STEP 8
66// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
67// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
68// /*== all animations enable ==*/
69#define RGBLIGHT_ANIMATIONS
70// /*== or choose animations ==*/
71// #define RGBLIGHT_EFFECT_BREATHING
72// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
73// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
74// #define RGBLIGHT_EFFECT_SNAKE
75// #define RGBLIGHT_EFFECT_KNIGHT
76// #define RGBLIGHT_EFFECT_CHRISTMAS
77// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
78// #define RGBLIGHT_EFFECT_RGB_TEST
79// #define RGBLIGHT_EFFECT_ALTERNATING
80// /*== customize breathing effect ==*/
81// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
82// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
83// /*==== use exp() and sin() ====*/
84// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
85// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
86// #endif
87
88/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
89#define DEBOUNCE 5
90
91/* define if matrix has ghost (lacks anti-ghosting diodes) */
92//#define MATRIX_HAS_GHOST
93
94/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
95#define LOCKING_SUPPORT_ENABLE
96/* Locking resynchronize hack */
97#define LOCKING_RESYNC_ENABLE
98
99/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
100 * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
101 */
102// #define GRAVE_ESC_CTRL_OVERRIDE
103
104/*
105 * Force NKRO
106 *
107 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
108 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
109 * makefile for this to work.)
110 *
111 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
112 * until the next keyboard reset.
113 *
114 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
115 * fully operational during normal computer usage.
116 *
117 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
118 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
119 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
120 * power-up.
121 *
122 */
123//#define FORCE_NKRO
124
125/*
126 * Magic Key Options
127 *
128 * Magic keys are hotkey commands that allow control over firmware functions of
129 * the keyboard. They are best used in combination with the HID Listen program,
130 * found here: https://www.pjrc.com/teensy/hid_listen.html
131 *
132 * The options below allow the magic key functionality to be changed. This is
133 * useful if your keyboard/keypad is missing keys and you want magic key support.
134 *
135 */
136
137/* key combination for magic key command */
138/* defined by default; to change, uncomment and set to the combination you want */
139// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
140
141/* control how magic key switches layers */
142//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
143//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
144//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
145
146/* override magic key keymap */
147//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
148//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
149//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
150//#define MAGIC_KEY_HELP H
151//#define MAGIC_KEY_HELP_ALT SLASH
152//#define MAGIC_KEY_DEBUG D
153//#define MAGIC_KEY_DEBUG_MATRIX X
154//#define MAGIC_KEY_DEBUG_KBD K
155//#define MAGIC_KEY_DEBUG_MOUSE M
156//#define MAGIC_KEY_VERSION V
157//#define MAGIC_KEY_STATUS S
158//#define MAGIC_KEY_CONSOLE C
159//#define MAGIC_KEY_LAYER0 0
160//#define MAGIC_KEY_LAYER0_ALT GRAVE
161//#define MAGIC_KEY_LAYER1 1
162//#define MAGIC_KEY_LAYER2 2
163//#define MAGIC_KEY_LAYER3 3
164//#define MAGIC_KEY_LAYER4 4
165//#define MAGIC_KEY_LAYER5 5
166//#define MAGIC_KEY_LAYER6 6
167//#define MAGIC_KEY_LAYER7 7
168//#define MAGIC_KEY_LAYER8 8
169//#define MAGIC_KEY_LAYER9 9
170//#define MAGIC_KEY_BOOTLOADER B
171//#define MAGIC_KEY_BOOTLOADER_ALT ESC
172//#define MAGIC_KEY_LOCK CAPS
173//#define MAGIC_KEY_EEPROM E
174//#define MAGIC_KEY_EEPROM_CLEAR BSPACE
175//#define MAGIC_KEY_NKRO N
176//#define MAGIC_KEY_SLEEP_LED Z
177
178/*
179 * Feature disable options
180 * These options are also useful to firmware size reduction.
181 */
182
183/* disable debug print */
184//#define NO_DEBUG
185
186/* disable print */
187//#define NO_PRINT
188
189/* disable action features */
190//#define NO_ACTION_LAYER
191//#define NO_ACTION_TAPPING
192//#define NO_ACTION_ONESHOT
193//#define NO_ACTION_MACRO
194//#define NO_ACTION_FUNCTION
195
196/*
197 * MIDI options
198 */
199
200/* Prevent use of disabled MIDI features in the keymap */
201//#define MIDI_ENABLE_STRICT 1
202
203/* enable basic MIDI features:
204 - MIDI notes can be sent when in Music mode is on
205*/
206//#define MIDI_BASIC
207
208/* enable advanced MIDI features:
209 - MIDI notes can be added to the keymap
210 - Octave shift and transpose
211 - Virtual sustain, portamento, and modulation wheel
212 - etc.
213*/
214//#define MIDI_ADVANCED
215
216/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
217//#define MIDI_TONE_KEYCODE_OCTAVES 1
218
219/*
220 * HD44780 LCD Display Configuration
221 */
222/*
223#define LCD_LINES 2 //< number of visible lines of the display
224#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
225
226#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
227
228#if LCD_IO_MODE
229#define LCD_PORT PORTB //< port for the LCD lines
230#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
231#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
232#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
233#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
234#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
235#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
236#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
237#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
238#define LCD_RS_PORT LCD_PORT //< port for RS line
239#define LCD_RS_PIN 3 //< pin for RS line
240#define LCD_RW_PORT LCD_PORT //< port for RW line
241#define LCD_RW_PIN 2 //< pin for RW line
242#define LCD_E_PORT LCD_PORT //< port for Enable line
243#define LCD_E_PIN 1 //< pin for Enable line
244#endif
245*/
246
247/* Bootmagic Lite key configuration */
248// #define BOOTMAGIC_LITE_ROW 0
249// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/retro_75/halconf.h b/keyboards/retro_75/halconf.h
new file mode 100644
index 000000000..8b9724b1a
--- /dev/null
+++ b/keyboards/retro_75/halconf.h
@@ -0,0 +1,353 @@
1/*
2 ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
3
4 Licensed under the Apache License, Version 2.0 (the "License");
5 you may not use this file except in compliance with the License.
6 You may obtain a copy of the License at
7
8 http://www.apache.org/licenses/LICENSE-2.0
9
10 Unless required by applicable law or agreed to in writing, software
11 distributed under the License is distributed on an "AS IS" BASIS,
12 WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 See the License for the specific language governing permissions and
14 limitations under the License.
15*/
16
17/**
18 * @file templates/halconf.h
19 * @brief HAL configuration header.
20 * @details HAL configuration file, this file allows to enable or disable the
21 * various device drivers from your application. You may also use
22 * this file in order to override the device drivers default settings.
23 *
24 * @addtogroup HAL_CONF
25 * @{
26 */
27
28#ifndef _HALCONF_H_
29#define _HALCONF_H_
30
31#include "mcuconf.h"
32
33/**
34 * @brief Enables the PAL subsystem.
35 */
36#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
37#define HAL_USE_PAL TRUE
38#endif
39
40/**
41 * @brief Enables the ADC subsystem.
42 */
43#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
44#define HAL_USE_ADC FALSE
45#endif
46
47/**
48 * @brief Enables the CAN subsystem.
49 */
50#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
51#define HAL_USE_CAN FALSE
52#endif
53
54/**
55 * @brief Enables the DAC subsystem.
56 */
57#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
58#define HAL_USE_DAC FALSE
59#endif
60
61/**
62 * @brief Enables the EXT subsystem.
63 */
64#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
65#define HAL_USE_EXT FALSE
66#endif
67
68/**
69 * @brief Enables the GPT subsystem.
70 */
71#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
72#define HAL_USE_GPT FALSE
73#endif
74
75/**
76 * @brief Enables the I2C subsystem.
77 */
78#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
79#define HAL_USE_I2C FALSE
80#endif
81
82/**
83 * @brief Enables the I2S subsystem.
84 */
85#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
86#define HAL_USE_I2S FALSE
87#endif
88
89/**
90 * @brief Enables the ICU subsystem.
91 */
92#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
93#define HAL_USE_ICU FALSE
94#endif
95
96/**
97 * @brief Enables the MAC subsystem.
98 */
99#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
100#define HAL_USE_MAC FALSE
101#endif
102
103/**
104 * @brief Enables the MMC_SPI subsystem.
105 */
106#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
107#define HAL_USE_MMC_SPI FALSE
108#endif
109
110/**
111 * @brief Enables the PWM subsystem.
112 */
113#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
114#define HAL_USE_PWM FALSE
115#endif
116
117/**
118 * @brief Enables the RTC subsystem.
119 */
120#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
121#define HAL_USE_RTC FALSE
122#endif
123
124/**
125 * @brief Enables the SDC subsystem.
126 */
127#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
128#define HAL_USE_SDC FALSE
129#endif
130
131/**
132 * @brief Enables the SERIAL subsystem.
133 */
134#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
135#define HAL_USE_SERIAL FALSE
136#endif
137
138/**
139 * @brief Enables the SERIAL over USB subsystem.
140 */
141#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
142#define HAL_USE_SERIAL_USB FALSE
143#endif
144
145/**
146 * @brief Enables the SPI subsystem.
147 */
148#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
149#define HAL_USE_SPI FALSE
150#endif
151
152/**
153 * @brief Enables the UART subsystem.
154 */
155#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
156#define HAL_USE_UART FALSE
157#endif
158
159/**
160 * @brief Enables the USB subsystem.
161 */
162#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
163#define HAL_USE_USB TRUE
164#endif
165
166/**
167 * @brief Enables the WDG subsystem.
168 */
169#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
170#define HAL_USE_WDG FALSE
171#endif
172
173/*===========================================================================*/
174/* ADC driver related settings. */
175/*===========================================================================*/
176
177/**
178 * @brief Enables synchronous APIs.
179 * @note Disabling this option saves both code and data space.
180 */
181#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
182#define ADC_USE_WAIT TRUE
183#endif
184
185/**
186 * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
187 * @note Disabling this option saves both code and data space.
188 */
189#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
190#define ADC_USE_MUTUAL_EXCLUSION TRUE
191#endif
192
193/*===========================================================================*/
194/* CAN driver related settings. */
195/*===========================================================================*/
196
197/**
198 * @brief Sleep mode related APIs inclusion switch.
199 */
200#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
201#define CAN_USE_SLEEP_MODE TRUE
202#endif
203
204/*===========================================================================*/
205/* I2C driver related settings. */
206/*===========================================================================*/
207
208/**
209 * @brief Enables the mutual exclusion APIs on the I2C bus.
210 */
211#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
212#define I2C_USE_MUTUAL_EXCLUSION TRUE
213#endif
214
215/*===========================================================================*/
216/* MAC driver related settings. */
217/*===========================================================================*/
218
219/**
220 * @brief Enables an event sources for incoming packets.
221 */
222#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
223#define MAC_USE_ZERO_COPY FALSE
224#endif
225
226/**
227 * @brief Enables an event sources for incoming packets.
228 */
229#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
230#define MAC_USE_EVENTS TRUE
231#endif
232
233/*===========================================================================*/
234/* MMC_SPI driver related settings. */
235/*===========================================================================*/
236
237/**
238 * @brief Delays insertions.
239 * @details If enabled this options inserts delays into the MMC waiting
240 * routines releasing some extra CPU time for the threads with
241 * lower priority, this may slow down the driver a bit however.
242 * This option is recommended also if the SPI driver does not
243 * use a DMA channel and heavily loads the CPU.
244 */
245#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
246#define MMC_NICE_WAITING TRUE
247#endif
248
249/*===========================================================================*/
250/* SDC driver related settings. */
251/*===========================================================================*/
252
253/**
254 * @brief Number of initialization attempts before rejecting the card.
255 * @note Attempts are performed at 10mS intervals.
256 */
257#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
258#define SDC_INIT_RETRY 100
259#endif
260
261/**
262 * @brief Include support for MMC cards.
263 * @note MMC support is not yet implemented so this option must be kept
264 * at @p FALSE.
265 */
266#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
267#define SDC_MMC_SUPPORT FALSE
268#endif
269
270/**
271 * @brief Delays insertions.
272 * @details If enabled this options inserts delays into the MMC waiting
273 * routines releasing some extra CPU time for the threads with
274 * lower priority, this may slow down the driver a bit however.
275 */
276#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
277#define SDC_NICE_WAITING TRUE
278#endif
279
280/*===========================================================================*/
281/* SERIAL driver related settings. */
282/*===========================================================================*/
283
284/**
285 * @brief Default bit rate.
286 * @details Configuration parameter, this is the baud rate selected for the
287 * default configuration.
288 */
289#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
290#define SERIAL_DEFAULT_BITRATE 38400
291#endif
292
293/**
294 * @brief Serial buffers size.
295 * @details Configuration parameter, you can change the depth of the queue
296 * buffers depending on the requirements of your application.
297 * @note The default is 64 bytes for both the transmission and receive
298 * buffers.
299 */
300#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
301#define SERIAL_BUFFERS_SIZE 16
302#endif
303
304/*===========================================================================*/
305/* SERIAL_USB driver related setting. */
306/*===========================================================================*/
307
308/**
309 * @brief Serial over USB buffers size.
310 * @details Configuration parameter, the buffer size must be a multiple of
311 * the USB data endpoint maximum packet size.
312 * @note The default is 64 bytes for both the transmission and receive
313 * buffers.
314 */
315#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
316#define SERIAL_USB_BUFFERS_SIZE 1
317#endif
318
319/*===========================================================================*/
320/* SPI driver related settings. */
321/*===========================================================================*/
322
323/**
324 * @brief Enables synchronous APIs.
325 * @note Disabling this option saves both code and data space.
326 */
327#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
328#define SPI_USE_WAIT TRUE
329#endif
330
331/**
332 * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
333 * @note Disabling this option saves both code and data space.
334 */
335#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
336#define SPI_USE_MUTUAL_EXCLUSION TRUE
337#endif
338
339/*===========================================================================*/
340/* USB driver related settings. */
341/*===========================================================================*/
342
343/**
344 * @brief Enables synchronous APIs.
345 * @note Disabling this option saves both code and data space.
346 */
347#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
348#define USB_USE_WAIT TRUE
349#endif
350
351#endif /* _HALCONF_H_ */
352
353/** @} */
diff --git a/keyboards/retro_75/info.json b/keyboards/retro_75/info.json
new file mode 100644
index 000000000..6a6253c37
--- /dev/null
+++ b/keyboards/retro_75/info.json
@@ -0,0 +1,15 @@
1{
2 "keyboard_name": "Retro75",
3 "url": "",
4 "maintainer": "zvecr",
5 "width": 16,
6 "height": 6.25,
7 "layouts": {
8 "LAYOUT": {
9 "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1.5, "y":0}, {"label":"F2", "x":2.5, "y":0}, {"label":"F3", "x":3.5, "y":0}, {"label":"F4", "x":4.5, "y":0}, {"label":"F5", "x":6, "y":0}, {"label":"F6", "x":7, "y":0}, {"label":"F7", "x":8, "y":0}, {"label":"F8", "x":9, "y":0}, {"label":"F9", "x":10.5, "y":0}, {"label":"F10", "x":11.5, "y":0}, {"label":"F11", "x":12.5, "y":0}, {"label":"F12", "x":13.5, "y":0}, {"label":"Prt Sc", "x":15, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"x":13, "y":1.25, "w":2}, {"label":"Delete", "x":15, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"label":"Page Up", "x":15, "y":2.25}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"\"", "x":11.75, "y":3.25}, {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, {"label":"Page Down", "x":15, "y":3.25}, {"label":"Shift", "x":0, "y":4.25, "w":2.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":1.75}, {"label":"\u2191", "x":14, "y":4.25}, {"label":"Fn", "x":15, "y":4.25}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.5}, {"label":"Alt", "x":2.25, "y":5.25, "w":1.5}, {"x":3.75, "y":5.25, "w":7}, {"label":"Alt", "x":10.75, "y":5.25, "w":1.5}, {"label":"\u2190", "x":13, "y":5.25}, {"label":"\u2193", "x":14, "y":5.25}, {"label":"\u2192", "x":15, "y":5.25}]
10 },
11 "LAYOUT_split_bs": {
12 "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1.5, "y":0}, {"label":"F2", "x":2.5, "y":0}, {"label":"F3", "x":3.5, "y":0}, {"label":"F4", "x":4.5, "y":0}, {"label":"F5", "x":6, "y":0}, {"label":"F6", "x":7, "y":0}, {"label":"F7", "x":8, "y":0}, {"label":"F8", "x":9, "y":0}, {"label":"F9", "x":10.5, "y":0}, {"label":"F10", "x":11.5, "y":0}, {"label":"F11", "x":12.5, "y":0}, {"label":"F12", "x":13.5, "y":0}, {"label":"Prt Sc", "x":15, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"x":13, "y":1.25}, {"x":14, "y":1.25}, {"label":"Delete", "x":15, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"label":"Page Up", "x":15, "y":2.25}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"\"", "x":11.75, "y":3.25}, {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, {"label":"Page Down", "x":15, "y":3.25}, {"label":"Shift", "x":0, "y":4.25, "w":2.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":1.75}, {"label":"\u2191", "x":14, "y":4.25}, {"label":"Fn", "x":15, "y":4.25}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.5}, {"label":"Alt", "x":2.25, "y":5.25, "w":1.5}, {"x":3.75, "y":5.25, "w":7}, {"label":"Alt", "x":10.75, "y":5.25, "w":1.5}, {"label":"\u2190", "x":13, "y":5.25}, {"label":"\u2193", "x":14, "y":5.25}, {"label":"\u2192", "x":15, "y":5.25}]
13 }
14 }
15} \ No newline at end of file
diff --git a/keyboards/retro_75/keymaps/default/keymap.c b/keyboards/retro_75/keymaps/default/keymap.c
new file mode 100644
index 000000000..602eb695b
--- /dev/null
+++ b/keyboards/retro_75/keymaps/default/keymap.c
@@ -0,0 +1,22 @@
1#include QMK_KEYBOARD_H
2
3const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
4
5 [0] = LAYOUT(
6 KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,
7 KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL,
8 KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
9 KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,
10 KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(1),
11 KC_LCTL, KC_LALT, KC_SPC, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT
12 ),
13
14 [1] = LAYOUT(
15 RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
16 _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
17 _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______,
18 _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
19 _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
20 _______, _______, _______, _______, _______, _______, _______
21 ),
22};
diff --git a/keyboards/retro_75/keymaps/split_backspace/keymap.c b/keyboards/retro_75/keymaps/split_backspace/keymap.c
new file mode 100644
index 000000000..58993b8bb
--- /dev/null
+++ b/keyboards/retro_75/keymaps/split_backspace/keymap.c
@@ -0,0 +1,22 @@
1#include QMK_KEYBOARD_H
2
3const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
4
5 [0] = LAYOUT_split_bs(
6 KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,
7 KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_DEL,
8 KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
9 KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,
10 KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(1),
11 KC_LCTL, KC_LALT, KC_SPC, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT
12 ),
13
14 [1] = LAYOUT_split_bs(
15 RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
16 _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
17 _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______,
18 _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
19 _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
20 _______, _______, _______, _______, _______, _______, _______
21 ),
22};
diff --git a/keyboards/retro_75/mcuconf.h b/keyboards/retro_75/mcuconf.h
new file mode 100644
index 000000000..faca3defd
--- /dev/null
+++ b/keyboards/retro_75/mcuconf.h
@@ -0,0 +1,171 @@
1/*
2 ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
3
4 Licensed under the Apache License, Version 2.0 (the "License");
5 you may not use this file except in compliance with the License.
6 You may obtain a copy of the License at
7
8 http://www.apache.org/licenses/LICENSE-2.0
9
10 Unless required by applicable law or agreed to in writing, software
11 distributed under the License is distributed on an "AS IS" BASIS,
12 WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 See the License for the specific language governing permissions and
14 limitations under the License.
15*/
16
17#ifndef _MCUCONF_H_
18#define _MCUCONF_H_
19
20/*
21 * STM32F0xx drivers configuration.
22 * The following settings override the default settings present in
23 * the various device driver implementation headers.
24 * Note that the settings for each driver only have effect if the whole
25 * driver is enabled in halconf.h.
26 *
27 * IRQ priorities:
28 * 3...0 Lowest...Highest.
29 *
30 * DMA priorities:
31 * 0...3 Lowest...Highest.
32 */
33
34#define STM32F0xx_MCUCONF
35
36/*
37 * HAL driver system settings.
38 */
39#define STM32_NO_INIT FALSE
40#define STM32_PVD_ENABLE FALSE
41#define STM32_PLS STM32_PLS_LEV0
42#define STM32_HSI_ENABLED TRUE
43#define STM32_HSI14_ENABLED TRUE
44#define STM32_HSI48_ENABLED FALSE
45#define STM32_LSI_ENABLED TRUE
46#define STM32_HSE_ENABLED FALSE
47#define STM32_LSE_ENABLED FALSE
48#define STM32_SW STM32_SW_PLL
49#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2
50#define STM32_PREDIV_VALUE 1
51#define STM32_PLLMUL_VALUE 12
52#define STM32_HPRE STM32_HPRE_DIV1
53#define STM32_PPRE STM32_PPRE_DIV1
54#define STM32_ADCSW STM32_ADCSW_HSI14
55#define STM32_ADCPRE STM32_ADCPRE_DIV4
56#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
57#define STM32_ADCPRE STM32_ADCPRE_DIV4
58#define STM32_ADCSW STM32_ADCSW_HSI14
59#define STM32_USBSW STM32_USBSW_HSI48
60#define STM32_CECSW STM32_CECSW_HSI
61#define STM32_I2C1SW STM32_I2C1SW_HSI
62#define STM32_USART1SW STM32_USART1SW_PCLK
63#define STM32_RTCSEL STM32_RTCSEL_LSI
64
65/*
66 * ADC driver system settings.
67 */
68#define STM32_ADC_USE_ADC1 FALSE
69#define STM32_ADC_ADC1_DMA_PRIORITY 2
70#define STM32_ADC_IRQ_PRIORITY 2
71#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
72
73/*
74 * EXT driver system settings.
75 */
76#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3
77#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3
78#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3
79#define STM32_EXT_EXTI16_IRQ_PRIORITY 3
80#define STM32_EXT_EXTI17_IRQ_PRIORITY 3
81
82/*
83 * GPT driver system settings.
84 */
85#define STM32_GPT_USE_TIM1 FALSE
86#define STM32_GPT_USE_TIM2 FALSE
87#define STM32_GPT_USE_TIM3 FALSE
88#define STM32_GPT_USE_TIM14 FALSE
89#define STM32_GPT_TIM1_IRQ_PRIORITY 2
90#define STM32_GPT_TIM2_IRQ_PRIORITY 2
91#define STM32_GPT_TIM3_IRQ_PRIORITY 2
92#define STM32_GPT_TIM14_IRQ_PRIORITY 2
93
94/*
95 * I2C driver system settings.
96 */
97#define STM32_I2C_USE_I2C1 FALSE
98#define STM32_I2C_USE_I2C2 FALSE
99#define STM32_I2C_BUSY_TIMEOUT 50
100#define STM32_I2C_I2C1_IRQ_PRIORITY 3
101#define STM32_I2C_I2C2_IRQ_PRIORITY 3
102#define STM32_I2C_USE_DMA TRUE
103#define STM32_I2C_I2C1_DMA_PRIORITY 1
104#define STM32_I2C_I2C2_DMA_PRIORITY 1
105#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
106
107/*
108 * ICU driver system settings.
109 */
110#define STM32_ICU_USE_TIM1 FALSE
111#define STM32_ICU_USE_TIM2 FALSE
112#define STM32_ICU_USE_TIM3 FALSE
113#define STM32_ICU_TIM1_IRQ_PRIORITY 3
114#define STM32_ICU_TIM2_IRQ_PRIORITY 3
115#define STM32_ICU_TIM3_IRQ_PRIORITY 3
116
117/*
118 * PWM driver system settings.
119 */
120#define STM32_PWM_USE_ADVANCED FALSE
121#define STM32_PWM_USE_TIM1 FALSE
122#define STM32_PWM_USE_TIM2 FALSE
123#define STM32_PWM_USE_TIM3 FALSE
124#define STM32_PWM_TIM1_IRQ_PRIORITY 3
125#define STM32_PWM_TIM2_IRQ_PRIORITY 3
126#define STM32_PWM_TIM3_IRQ_PRIORITY 3
127
128/*
129 * SERIAL driver system settings.
130 */
131#define STM32_SERIAL_USE_USART1 FALSE
132#define STM32_SERIAL_USE_USART2 FALSE
133#define STM32_SERIAL_USART1_PRIORITY 3
134#define STM32_SERIAL_USART2_PRIORITY 3
135
136/*
137 * SPI driver system settings.
138 */
139#define STM32_SPI_USE_SPI1 FALSE
140#define STM32_SPI_USE_SPI2 FALSE
141#define STM32_SPI_SPI1_DMA_PRIORITY 1
142#define STM32_SPI_SPI2_DMA_PRIORITY 1
143#define STM32_SPI_SPI1_IRQ_PRIORITY 2
144#define STM32_SPI_SPI2_IRQ_PRIORITY 2
145#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
146
147/*
148 * ST driver system settings.
149 */
150#define STM32_ST_IRQ_PRIORITY 2
151#define STM32_ST_USE_TIMER 2
152
153/*
154 * UART driver system settings.
155 */
156#define STM32_UART_USE_USART1 FALSE
157#define STM32_UART_USE_USART2 FALSE
158#define STM32_UART_USART1_IRQ_PRIORITY 3
159#define STM32_UART_USART2_IRQ_PRIORITY 3
160#define STM32_UART_USART1_DMA_PRIORITY 0
161#define STM32_UART_USART2_DMA_PRIORITY 0
162#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
163
164/*
165 * USB driver system settings.
166 */
167#define STM32_USB_USE_USB1 TRUE
168#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
169#define STM32_USB_USB1_LP_IRQ_PRIORITY 3
170
171#endif /* _MCUCONF_H_ */
diff --git a/keyboards/retro_75/readme.md b/keyboards/retro_75/readme.md
new file mode 100644
index 000000000..0eb0afff3
--- /dev/null
+++ b/keyboards/retro_75/readme.md
@@ -0,0 +1,15 @@
1# Retro75
2
3![Retro75](https://i.imgur.com/spS7PHo.jpg)
4
5A 75% ARM STM32F072 keyboard, with WS2812 LEDs.
6
7* Keyboard Maintainer: [zvecr](https://github.com/zvecr)
8* Hardware Supported: Retro75 PCB
9* Hardware Availability: Private Group-Buy
10
11Make example for this keyboard (after setting up your build environment):
12
13 make retro_75:default
14
15See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/retro_75/retro_75.c b/keyboards/retro_75/retro_75.c
new file mode 100644
index 000000000..d47def372
--- /dev/null
+++ b/keyboards/retro_75/retro_75.c
@@ -0,0 +1 @@
#include "retro_75.h"
diff --git a/keyboards/retro_75/retro_75.h b/keyboards/retro_75/retro_75.h
new file mode 100644
index 000000000..7a7d10e42
--- /dev/null
+++ b/keyboards/retro_75/retro_75.h
@@ -0,0 +1,61 @@
1/* Copyright 2019 zvecr<git@zvecr.com>
2 *
3 * This program is free software: you can redistribute it and/or modify
4 * it under the terms of the GNU General Public License as published by
5 * the Free Software Foundation, either version 2 of the License, or
6 * (at your option) any later version.
7 *
8 * This program is distributed in the hope that it will be useful,
9 * but WITHOUT ANY WARRANTY; without even the implied warranty of
10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11 * GNU General Public License for more details.
12 *
13 * You should have received a copy of the GNU General Public License
14 * along with this program. If not, see <http://www.gnu.org/licenses/>.
15 */
16#pragma once
17
18#include "quantum.h"
19#define ____ KC_NO
20
21/* This a shortcut to help you visually see your layout.
22 *
23 * The first section contains all of the arguments representing the physical
24 * layout of the board and position of the keys.
25 *
26 * The second converts the arguments into a two-dimensional array which
27 * represents the switch matrix.
28 */
29#define LAYOUT( \
30 K000, K002, K003, K004, K005, K006, K007, K008, K009, K011, K012, K013, K014, K015, \
31 K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K115, \
32 K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \
33 K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K315, \
34 K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K415, \
35 K500, K501, K505, K509, K511, K512, K515 \
36) \
37{ \
38 { K000, ____, K002, K003, K004, K005, K006, K007, K008, K009, ____, K011, K012, K013, K014, K015}, \
39 { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, ____, K115}, \
40 { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, ____, K215}, \
41 { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, ____, ____, K315}, \
42 { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, ____, ____, K415}, \
43 { K500, K501, ____, ____, ____, K505, ____, ____, ____, K509, ____, K511, K512, ____, ____, K515}, \
44}
45
46#define LAYOUT_split_bs( \
47 K000, K002, K003, K004, K005, K006, K007, K008, K009, K011, K012, K013, K014, K015, \
48 K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \
49 K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \
50 K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K315, \
51 K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K415, \
52 K500, K501, K505, K509, K511, K512, K515 \
53) \
54{ \
55 { K000, ____, K002, K003, K004, K005, K006, K007, K008, K009, ____, K011, K012, K013, K014, K015}, \
56 { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115}, \
57 { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, ____, K215}, \
58 { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, ____, ____, K315}, \
59 { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, ____, ____, K415}, \
60 { K500, K501, ____, ____, ____, K505, ____, ____, ____, K509, ____, K511, K512, ____, ____, K515}, \
61}
diff --git a/keyboards/retro_75/rules.mk b/keyboards/retro_75/rules.mk
new file mode 100644
index 000000000..82a2cfb06
--- /dev/null
+++ b/keyboards/retro_75/rules.mk
@@ -0,0 +1,54 @@
1## chip/board settings
2# the next two should match the directories in
3# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
4MCU_FAMILY = STM32
5MCU_SERIES = STM32F0xx
6# linker script to use
7# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
8# or <this_dir>/ld/
9MCU_LDSCRIPT = STM32F072xB
10# startup code to use
11# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
12MCU_STARTUP = stm32f0xx
13# it should exist either in <chibios>/os/hal/boards/
14# or <this_dir>/boards
15BOARD = ST_STM32F072B_DISCOVERY
16# Cortex version
17# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
18MCU = cortex-m0
19# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
20ARMV = 6
21# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
22# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
23# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
24# a custom board definition that you plan to reuse).
25# If you're not setting it here, leave it commented out.
26# It is chip dependent, the correct number can be looked up here (page 175):
27# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
28# This also requires a patch to chibios:
29# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
30#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
31
32# Options to pass to dfu-util when flashing
33DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
34DFU_SUFFIX_ARGS = -p df11 -v 0483
35
36# Build Options
37# change yes to no to disable
38#
39BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
40MOUSEKEY_ENABLE = yes # Mouse keys
41EXTRAKEY_ENABLE = yes # Audio control and System control
42CONSOLE_ENABLE = no # Console for debug
43COMMAND_ENABLE = no # Commands for debug and configuration
44# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
45SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
46# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
47NKRO_ENABLE = no # USB Nkey Rollover
48BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
49RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
50MIDI_ENABLE = no # MIDI support
51BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
52AUDIO_ENABLE = no # Audio output on port C6
53FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
54HD44780_ENABLE = no # Enable support for HD44780 based LCDs
generated by cgit v1.2.3 (git 2.25.1) at 2025-11-19 19:56:56 +0000