3 files changed, 74 insertions, 73 deletions

diff --git a/keyboards/rama/m60_a/config.h b/keyboards/rama/m60_a/config.h
index 45e7d8896..03794965f 100644
--- a/keyboards/rama/m60_a/config.h
+++ b/keyboards/rama/m60_a/config.h
@@ -18,8 +18,8 @@
 #include "config_common.h"
 
 // USB Device descriptor parameter
-#define VENDOR_ID       0xFEED // This is same as Zeal60 for now
-#define PRODUCT_ID      0x6060 // This is same as Zeal60 for now
+#define VENDOR_ID       0x5241 // "RW"
+#define PRODUCT_ID      0x060A // 60-A
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    RAMA.WORKS
 #define PRODUCT         RAMA M60-A
diff --git a/keyboards/zeal60/zeal60.c b/keyboards/zeal60/zeal60.c
index 092235ca6..be54f75f3 100644
--- a/keyboards/zeal60/zeal60.c
+++ b/keyboards/zeal60/zeal60.c
@@ -38,6 +38,14 @@ void eeprom_set_valid(bool valid)
         eeprom_update_byte(((void*)EEPROM_VERSION_ADDR), valid ? EEPROM_VERSION : 0xFF);
 }
 
+void eeprom_reset(void)
+{
+        // Set the Zeal60 specific EEPROM state as invalid.
+        eeprom_set_valid(false);
+        // Set the TMK/QMK EEPROM state as invalid.
+        eeconfig_disable();
+}
+
 #ifdef RAW_ENABLE
 
 void raw_hid_receive( uint8_t *data, uint8_t length )
@@ -54,7 +62,7 @@ void raw_hid_receive( uint8_t *data, uint8_t length )
                 }
                 case id_get_keyboard_value:
                 {
-                        if ( command_data[0] == 0x01 )
+                        if ( command_data[0] == id_uptime )
                         {
                                 uint32_t value = timer_read32();
                                 command_data[1] = (value >> 24 ) & 0xFF;
@@ -104,6 +112,21 @@ void raw_hid_receive( uint8_t *data, uint8_t length )
                         break;
                 }
 #endif // RGB_BACKLIGHT_ENABLED
+                case id_eeprom_reset:
+                {
+                        eeprom_reset();
+                        break;
+                }
+                case id_bootloader_jump:
+                {
+                        // Need to send data back before the jump
+                        // Informs host that the command is handled
+                        raw_hid_send( data, length );
+                        // Give host time to read it
+                        wait_ms(100);
+                        bootloader_jump();
+                        break;
+                }
                 default:
                 {
                         // Unhandled message.
@@ -119,74 +142,61 @@ void raw_hid_receive( uint8_t *data, uint8_t length )
 
 #endif
 
-void bootmagic_lite(void)
+void main_init(void)
 {
-        // The lite version of TMK's bootmagic.
-        // 100% less potential for accidentally making the
-        // keyboard do stupid things.
-
-        // We need multiple scans because debouncing can't be turned off.
-        matrix_scan();
-        wait_ms(DEBOUNCING_DELAY);
-        wait_ms(DEBOUNCING_DELAY);
-        matrix_scan();
-
-        // If the Esc and space bar are held down on power up,
-        // reset the EEPROM valid state and jump to bootloader.
-        // Assumes Esc is at [0,0] and spacebar is at [4,7].
-        // This isn't very generalized, but we need something that doesn't
-        // rely on user's keymaps in firmware or EEPROM.
-        if ( ( matrix_get_row(0) & (1<<0) ) &&
-                ( matrix_get_row(4) & (1<<7) ) )
-        {
-                // Set the Zeal60 specific EEPROM state as invalid.
-                eeprom_set_valid(false);
-                // Set the TMK/QMK EEPROM state as invalid.
-                eeconfig_disable();
-                // Jump to bootloader.
-                bootloader_jump();
-        }
-}
-
-void matrix_init_kb(void)
-{
-        bootmagic_lite();
-
         // If the EEPROM has the magic, the data is good.
         // OK to load from EEPROM.
-        if (eeprom_is_valid())
-        {
+        if (eeprom_is_valid()) {
 #if RGB_BACKLIGHT_ENABLED
                 backlight_config_load();
 #endif // RGB_BACKLIGHT_ENABLED
-                // TODO: do something to "turn on" keymaps in EEPROM?
-        }
-        else
-        {
+        } else  {
 #if RGB_BACKLIGHT_ENABLED
                 // If the EEPROM has not been saved before, or is out of date,
                 // save the default values to the EEPROM. Default values
                 // come from construction of the zeal_backlight_config instance.
                 backlight_config_save();
 #endif // RGB_BACKLIGHT_ENABLED
-
 #ifdef DYNAMIC_KEYMAP_ENABLE
                 // This resets the keymaps in EEPROM to what is in flash.
                 dynamic_keymap_reset();
 #endif
-
                 // Save the magic number last, in case saving was interrupted
                 eeprom_set_valid(true);
         }
-
 #if RGB_BACKLIGHT_ENABLED
         // Initialize LED drivers for backlight.
         backlight_init_drivers();
-        
+
         backlight_timer_init();
         backlight_timer_enable();
 #endif // RGB_BACKLIGHT_ENABLED
+}
 
+void bootmagic_lite(void)
+{
+        // The lite version of TMK's bootmagic.
+        // 100% less potential for accidentally making the
+        // keyboard do stupid things.
+
+        // We need multiple scans because debouncing can't be turned off.
+        matrix_scan();
+        wait_ms(DEBOUNCING_DELAY);
+        wait_ms(DEBOUNCING_DELAY);
+        matrix_scan();
+
+        // If the Esc (matrix 0,0) is held down on power up,
+        // reset the EEPROM valid state and jump to bootloader.
+        if ( matrix_get_row(0) & (1<<0) ) {
+                eeprom_reset();
+                bootloader_jump();
+        }
+}
+
+void matrix_init_kb(void)
+{
+        bootmagic_lite();
+        main_init();
         matrix_init_user();
 }
 
@@ -205,29 +215,22 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record)
         process_record_backlight(keycode, record);
 #endif // BACKLIGHT_ENABLED
 
-        switch(keycode)
-        {
+        switch(keycode) {
                 case FN_MO13:
-                        if (record->event.pressed)
-                        {
+                        if (record->event.pressed) {
                                 layer_on(1);
                                 update_tri_layer(1, 2, 3);
-                        }
-                        else
-                        {
+                        } else {
                                 layer_off(1);
                                 update_tri_layer(1, 2, 3);
                         }
                         return false;
                         break;
                 case FN_MO23:
-                        if (record->event.pressed)
-                        {
+                        if (record->event.pressed) {
                                 layer_on(2);
                                 update_tri_layer(1, 2, 3);
-                        }
-                        else
-                        {
+                        } else {
                                 layer_off(2);
                                 update_tri_layer(1, 2, 3);
                         }
@@ -247,8 +250,7 @@ uint16_t keymap_function_id_to_action( uint16_t function_id )
         if ( function_id >= 0x0F00 && function_id <= 0x0FFF )
         {
                 uint8_t id = function_id & 0xFF;
-                switch ( id )
-                {
+                switch ( id ) {
                         case TRIPLE_TAP_1_3:
                         case TRIPLE_TAP_2_3:
                         {
@@ -293,24 +295,16 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
         {
         case TRIPLE_TAP_1_3:
         case TRIPLE_TAP_2_3:
-                if (record->event.pressed)
-                {
+                if (record->event.pressed) {
                         layer_on( id == TRIPLE_TAP_1_3 ? 1 : 2 );
-
-                        if (record->tap.count && !record->tap.interrupted)
-                        {
-                                if (record->tap.count >= 3)
-                                {
+                        if (record->tap.count && !record->tap.interrupted) {
+                                if (record->tap.count >= 3) {
                                         layer_invert(3);
                                 }
-                        }
-                        else
-                        {
+                        } else {
                                 record->tap.count = 0;
                         }
-                }
-                else
-                {
+                } else {
                         layer_off( id == TRIPLE_TAP_1_3 ? 1 : 2 );
                 }
                 break;
diff --git a/keyboards/zeal60/zeal60_api.h b/keyboards/zeal60/zeal60_api.h
index eaac3ad7c..a65bf2f50 100644
--- a/keyboards/zeal60/zeal60_api.h
+++ b/keyboards/zeal60/zeal60_api.h
@@ -28,6 +28,13 @@ enum zeal60_command_id
         id_backlight_config_set_value,
         id_backlight_config_get_value,
         id_backlight_config_save,
-
+        id_eeprom_reset,
+        id_bootloader_jump,
         id_unhandled = 0xFF,
 };
+
+enum zeal60_keyboard_value_id
+{
+        id_uptime = 0x01
+};
+