1 files changed, 7 insertions, 10 deletions
diff --git a/docs/i2c_driver.md b/docs/i2c_driver.md
index 3ec34a0f8..9017b44ed 100644
--- a/docs/i2c_driver.md
+++ b/docs/i2c_driver.md
@@ -62,16 +62,13 @@ Then, modify your board's `mcuconf.h` to enable the peripheral you've chosen, fo
 Configuration-wise, you'll need to set up the peripheral as per your MCU's datasheet -- the defaults match the pins for a Proton-C, i.e. STM32F303.
-|`config.h` Overrride    |Description                                                                                |Default|
+|`config.h` Overrride    |Description                                                   |Default|
-|------------------------|-------------------------------------------------------------------------------------------|-------|
+|------------------------|--------------------------------------------------------------|-------|
-|`I2C_DRIVER`            |I2C peripheral to use - I2C1 -> `I2CD1`, I2C2 -> `I2CD2` etc.                              |`I2CD1`|
+|`I2C_DRIVER`            |I2C peripheral to use - I2C1 -> `I2CD1`, I2C2 -> `I2CD2` etc. |`I2CD1`|
-|`I2C1_BANK` (deprecated)|The bank of pins (`GPIOA`, `GPIOB`, `GPIOC`), superseded by `I2C1_SCL_BANK`/`I2C1_SDA_BANK`|`GPIOB`|
+|`I2C1_SCL_PIN`          |The pin definition for SCL                                    |`B6`   |
-|`I2C1_SCL_BANK`         |The bank of pins (`GPIOA`, `GPIOB`, `GPIOC`) to use for SCL                                |`GPIOB`|
+|`I2C1_SCL_PAL_MODE`     |The alternate function mode for SCL                           |`4`    |
-|`I2C1_SCL`              |The pin number for SCL (0-15)                                                              |`6`    |
+|`I2C1_SDA_PIN`          |The pin definition for SDA                                    |`B7`   |
-|`I2C1_SCL_PAL_MODE`     |The alternate function mode for SCL                                                        |`4`    |
+|`I2C1_SDA_PAL_MODE`     |The alternate function mode for SDA                           |`4`    |
-|`I2C1_SDA_BANK`         |The bank of pins (`GPIOA`, `GPIOB`, `GPIOC`) to use for SDA                                |`GPIOB`|
-|`I2C1_SDA`              |The pin number for SDA (0-15)                                                              |`7`    |
-|`I2C1_SDA_PAL_MODE`     |The alternate function mode for SDA                                                        |`4`    |
 The following configuration values depend on the specific MCU in use.

diff --git a/docs/i2c_driver.md b/docs/i2c_driver.md index 3ec34a0f8..9017b44ed 100644 --- a/docs/i2c_driver.md +++ b/docs/i2c_driver.md
@@ -62,16 +62,13 @@ Then, modify your board's `mcuconf.h` to enable the peripheral you've chosen, fo
62		62
63	Configuration-wise, you'll need to set up the peripheral as per your MCU's datasheet -- the defaults match the pins for a Proton-C, i.e. STM32F303.	63	Configuration-wise, you'll need to set up the peripheral as per your MCU's datasheet -- the defaults match the pins for a Proton-C, i.e. STM32F303.
64		64
65	\|`config.h` Overrride \|Description \|Default\|	65	\|`config.h` Overrride \|Description \|Default\|
66	\|------------------------\|-------------------------------------------------------------------------------------------\|-------\|	66	\|------------------------\|--------------------------------------------------------------\|-------\|
67	\|`I2C_DRIVER` \|I2C peripheral to use - I2C1 -> `I2CD1`, I2C2 -> `I2CD2` etc. \|`I2CD1`\|	67	\|`I2C_DRIVER` \|I2C peripheral to use - I2C1 -> `I2CD1`, I2C2 -> `I2CD2` etc. \|`I2CD1`\|
68	\|`I2C1_BANK` (deprecated)\|The bank of pins (`GPIOA`, `GPIOB`, `GPIOC`), superseded by `I2C1_SCL_BANK`/`I2C1_SDA_BANK`\|`GPIOB`\|	68	\|`I2C1_SCL_PIN` \|The pin definition for SCL \|`B6` \|
69	\|`I2C1_SCL_BANK` \|The bank of pins (`GPIOA`, `GPIOB`, `GPIOC`) to use for SCL \|`GPIOB`\|	69	\|`I2C1_SCL_PAL_MODE` \|The alternate function mode for SCL \|`4` \|
70	\|`I2C1_SCL` \|The pin number for SCL (0-15) \|`6` \|	70	\|`I2C1_SDA_PIN` \|The pin definition for SDA \|`B7` \|
71	\|`I2C1_SCL_PAL_MODE` \|The alternate function mode for SCL \|`4` \|	71	\|`I2C1_SDA_PAL_MODE` \|The alternate function mode for SDA \|`4` \|
72	\|`I2C1_SDA_BANK` \|The bank of pins (`GPIOA`, `GPIOB`, `GPIOC`) to use for SDA \|`GPIOB`\|
73	\|`I2C1_SDA` \|The pin number for SDA (0-15) \|`7` \|
74	\|`I2C1_SDA_PAL_MODE` \|The alternate function mode for SDA \|`4` \|
75		72
76	The following configuration values depend on the specific MCU in use.	73	The following configuration values depend on the specific MCU in use.
77		74