1 files changed, 27 insertions, 0 deletions

diff --git a/keyboards/bpiphany/ghost_squid/readme.md b/keyboards/bpiphany/ghost_squid/readme.md
new file mode 100644
index 000000000..ab39e0f72
--- /dev/null
+++ b/keyboards/bpiphany/ghost_squid/readme.md
@@ -0,0 +1,27 @@
+# Ghost Squid Controller
+
+This is the firmware for Rev. 20140518 of the Ghost Squid controller by [Bathroom Epiphanies](http://bathroomepiphanies.com/controllers/), a replacement controller for the [Cooler Master Quick Fire XT](https://www.coolermaster.com/catalog/peripheral/keyboards/quick-fire-xt/).
+
+The code was adapted from the [BathroomEpiphanies QMK Firmware](https://github.com/BathroomEpiphanies/epiphanies_qmk_keyboard/tree/master/keyboards/ghost_squid_20140518).
+
+* Keyboard Maintainer: QMK Community
+* Hardware Supported: Ghost Squid
+* Hardware Availability: [1upkeyboards](https://1upkeyboards.com/shop/controllers/qf-xt-ghost-squid-controller-2/)
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+
+Make example for this keyboard (after setting up your build environment):
+
+104 key default layout:
+
+    make bpiphany/ghost_squid:default
+
+Flashing example for this keyboard:
+
+    make bpiphany/ghost_squid:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).