1 files changed, 30 insertions, 0 deletions

diff --git a/keyboards/kprepublic/bm80hsrgb/readme.md b/keyboards/kprepublic/bm80hsrgb/readme.md
new file mode 100644
index 000000000..f48af7390
--- /dev/null
+++ b/keyboards/kprepublic/bm80hsrgb/readme.md
@@ -0,0 +1,30 @@
+# BM80HSRGB
+
+![BM80HSRGB](https://i.imgur.com/AqjEjOi.jpeg)
+
+A tkl, hotswap, in switch RGB keyboard from KPRepublic.
+
+* Keyboard Maintainer: [peepeetee](https://github.com/peepeetee)
+* Hardware Supported: BM80HSRGB
+* Hardware Availability: [KP Republic](https://kprepublic.com/collections/new-arrival/products/bm80rgb-bm80-rgb-80-hot-swappable-custom-mechanical-keyboard-pcb-programmed-qmk-via-firmware-full-rgb-switch-underglow-type-c)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make kprepublic/bm80hsrgb:default
+
+Flashing example for this keyboard:
+
+    make kprepublic/bm80hsrgb:default:flash
+
+To reset the board into bootloader mode, do one of the following:
+
+* Short the two-pad footprint between the "delete" key and the "end" key while the board is plugged in
+* Press the switch labled RST on the back of the PCB, near the MCU, while the board is plugged in
+* Hold the Esc key while connecting the USB cable (also erases persistent settings)
+
+All of the RGB matrix effects are enabled by default. To disable specific ones, see [this section](https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects) for more information.
+
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+