25 files changed, 1938 insertions, 0 deletions
diff --git a/keyboards/ploopyco/mouse/config.h b/keyboards/ploopyco/mouse/config.h
new file mode 100644
index 000000000..787eb9a85
--- /dev/null
+++ b/keyboards/ploopyco/mouse/config.h
@@ -0,0 +1,73 @@
+/* Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <drashna@live.com>
+ * Copyright 2019 Sunjun Kim
+ * Copyright 2020 Ploopy Corporation
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+#include "config_common.h"
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x5043
+#define PRODUCT_ID 0x4D6F
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Ploopyco
+#define PRODUCT Mouse
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 8
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define DIRECT_PINS                        \
+    {                                      \
+        { D4, D2, E6, B6, D7, C6, C7, B7 } \
+    }
+// These pins are not broken out, and cannot be used normally.
+// They are set as output and pulled high, by default
+#define UNUSED_PINS \
+    { B4, D6, F1, F5, F6, F7 }
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+/* Much more so than a keyboard, speed matters for a mouse. So we'll go for as high
+   a polling rate as possible. */
+#define USB_POLLING_INTERVAL_MS 1
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+/* Bootmagic Lite key configuration */
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 3
diff --git a/keyboards/ploopyco/mouse/info.json b/keyboards/ploopyco/mouse/info.json
new file mode 100644
index 000000000..6763838dc
--- /dev/null
+++ b/keyboards/ploopyco/mouse/info.json
@@ -0,0 +1,21 @@
+{
+    "keyboard_name": "PloopyCo Mouse",
+    "url": "",
+    "maintainer": "drashna",
+    "width": 8,
+    "height": 3,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"x":1, "y":0, "h":2},
+                {"x":2, "y":0, "h":2},
+                {"x":3, "y":0.25, "h":1.25},
+                {"x":4, "y":0, "h":2},
+                {"x":5, "y":0, "h":2},
+                {"x":0, "y":0},
+                {"x":0, "y":1},
+                {"x":3, "y":1.5}
+            ]
+        }
+    }
+}
diff --git a/keyboards/ploopyco/mouse/keymaps/default/keymap.c b/keyboards/ploopyco/mouse/keymaps/default/keymap.c
new file mode 100644
index 000000000..c02d23d2a
--- /dev/null
+++ b/keyboards/ploopyco/mouse/keymaps/default/keymap.c
@@ -0,0 +1,23 @@
+/* Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <drashna@live.com>
+ * Copyright 2019 Sunjun Kim
+ * Copyright 2020 Ploopy Corporation
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(/* Base */
+                 C(KC_C), KC_BTN1, KC_BTN3, KC_BTN2, C(KC_C), KC_BTN4, KC_BTN5, C(KC_Z)),
+};
diff --git a/keyboards/ploopyco/mouse/keymaps/default/readme.md b/keyboards/ploopyco/mouse/keymaps/default/readme.md
new file mode 100644
index 000000000..f965ef3c3
--- /dev/null
+++ b/keyboards/ploopyco/mouse/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for Ploopyco Trackball
diff --git a/keyboards/ploopyco/mouse/keymaps/via/keymap.c b/keyboards/ploopyco/mouse/keymaps/via/keymap.c
new file mode 100644
index 000000000..27a038438
--- /dev/null
+++ b/keyboards/ploopyco/mouse/keymaps/via/keymap.c
@@ -0,0 +1,26 @@
+/* Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <drashna@live.com>
+ * Copyright 2019 Sunjun Kim
+ * Copyright 2020 Ploopy Corporation
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(/* Base */
+                 C(KC_C), KC_BTN1, KC_BTN3, KC_BTN2, C(KC_C), KC_BTN4, KC_BTN5, C(KC_Z)),
+    [1] = LAYOUT(_______, _______, _______, _______, _______, _______, _______, _______),
+    [2] = LAYOUT(_______, _______, _______, _______, _______, _______, _______, _______),
+    [3] = LAYOUT(_______, _______, _______, _______, _______, _______, _______, _______),
+};
diff --git a/keyboards/ploopyco/mouse/keymaps/via/rules.mk b/keyboards/ploopyco/mouse/keymaps/via/rules.mk
new file mode 100644
index 000000000..1e5b99807
--- /dev/null
+++ b/keyboards/ploopyco/mouse/keymaps/via/rules.mk
@@ -0,0 +1 @@
+VIA_ENABLE = yes
diff --git a/keyboards/ploopyco/mouse/mouse.c b/keyboards/ploopyco/mouse/mouse.c
new file mode 100644
index 000000000..6a9bffbff
--- /dev/null
+++ b/keyboards/ploopyco/mouse/mouse.c
@@ -0,0 +1,237 @@
+/* Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <drashna@live.com>
+ * Copyright 2019 Sunjun Kim
+ * Copyright 2020 Ploopy Corporation
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+#ifndef OPT_DEBOUNCE
+#    define OPT_DEBOUNCE 5  // (ms)                     Time between scroll events
+#endif
+#ifndef SCROLL_BUTT_DEBOUNCE
+#    define SCROLL_BUTT_DEBOUNCE 100  // (ms)                   Time between scroll events
+#endif
+#ifndef OPT_THRES
+#    define OPT_THRES 150  // (0-1024)  Threshold for actication
+#endif
+#ifndef OPT_SCALE
+#    define OPT_SCALE 1  // Multiplier for wheel
+#endif
+// TODO: Implement libinput profiles
+// https://wayland.freedesktop.org/libinput/doc/latest/pointer-acceleration.html
+// Compile time accel selection
+// Valid options are ACC_NONE, ACC_LINEAR, ACC_CUSTOM, ACC_QUADRATIC
+// Trackball State
+bool     is_scroll_clicked = false;
+bool     BurstState        = false;  // init burst state for Trackball module
+uint16_t MotionStart       = 0;      // Timer for accel, 0 is resting state
+uint16_t lastScroll        = 0;      // Previous confirmed wheel event
+uint16_t lastMidClick      = 0;      // Stops scrollwheel from being read if it was pressed
+uint8_t  OptLowPin         = OPT_ENC1;
+bool     debug_encoder     = false;
+__attribute__((weak)) void process_wheel_user(report_mouse_t* mouse_report, int16_t h, int16_t v) {
+    mouse_report->h = h;
+    mouse_report->v = v;
+}
+__attribute__((weak)) void process_wheel(report_mouse_t* mouse_report) {
+    // TODO: Replace this with interrupt driven code,  polling is S L O W
+    // Lovingly ripped from the Ploopy Source
+    // If the mouse wheel was just released, do not scroll.
+    if (timer_elapsed(lastMidClick) < SCROLL_BUTT_DEBOUNCE) {
+        return;
+    }
+    // Limit the number of scrolls per unit time.
+    if (timer_elapsed(lastScroll) < OPT_DEBOUNCE) {
+        return;
+    }
+    // Don't scroll if the middle button is depressed.
+    if (is_scroll_clicked) {
+#ifndef IGNORE_SCROLL_CLICK
+        return;
+#endif
+    }
+    lastScroll  = timer_read();
+    uint16_t p1 = adc_read(OPT_ENC1_MUX);
+    uint16_t p2 = adc_read(OPT_ENC2_MUX);
+    if (debug_encoder) dprintf("OPT1: %d, OPT2: %d\n", p1, p2);
+    uint8_t dir = opt_encoder_handler(p1, p2);
+    if (dir == 0) return;
+    process_wheel_user(mouse_report, mouse_report->h, (int)(mouse_report->v + (dir * OPT_SCALE)));
+}
+__attribute__((weak)) void process_mouse_user(report_mouse_t* mouse_report, int16_t x, int16_t y) {
+    mouse_report->x = x;
+    mouse_report->y = y;
+}
+__attribute__((weak)) void process_mouse(report_mouse_t* mouse_report) {
+    report_pmw_t data = pmw_read_burst();
+    if (data.isOnSurface && data.isMotion) {
+        // Reset timer if stopped moving
+        if (!data.isMotion) {
+            if (MotionStart != 0) MotionStart = 0;
+            return;
+        }
+        // Set timer if new motion
+        if ((MotionStart == 0) && data.isMotion) {
+            if (debug_mouse) dprintf("Starting motion.\n");
+            MotionStart = timer_read();
+        }
+        if (debug_mouse) {
+            dprintf("Delt] d: %d t: %u\n", abs(data.dx) + abs(data.dy), MotionStart);
+        }
+        if (debug_mouse) {
+            dprintf("Pre ] X: %d, Y: %d\n", data.dx, data.dy);
+        }
+#if defined(PROFILE_LINEAR)
+        float scale = float(timer_elaspsed(MotionStart)) / 1000.0;
+        data.dx *= scale;
+        data.dy *= scale;
+#elif defined(PROFILE_INVERSE)
+        // TODO
+#else
+        // no post processing
+#endif
+        // apply multiplier
+        // data.dx *= mouse_multiplier;
+        // data.dy *= mouse_multiplier;
+        // Wrap to HID size
+        data.dx = constrain(data.dx, -127, 127);
+        data.dy = constrain(data.dy, -127, 127);
+        if (debug_mouse) dprintf("Cons] X: %d, Y: %d\n", data.dx, data.dy);
+        // dprintf("Elapsed:%u, X: %f Y: %\n", i, pgm_read_byte(firmware_data+i));
+        process_mouse_user(mouse_report, data.dx, data.dy);
+    }
+}
+bool process_record_kb(uint16_t keycode, keyrecord_t* record) {
+    if (debug_mouse) {
+        dprintf("KL: kc: %u, col: %u, row: %u, pressed: %u\n", keycode, record->event.key.col, record->event.key.row, record->event.pressed);
+    }
+    // Update Timer to prevent accidental scrolls
+    if ((record->event.key.col == 2) && (record->event.key.row == 0)) {
+        lastMidClick = timer_read();
+        is_scroll_clicked = record->event.pressed;
+    }
+/* If Mousekeys is disabled, then use handle the mouse button
+ * keycodes.  This makes things simpler, and allows usage of
+ * the keycodes in a consistent manner.  But only do this if
+ * Mousekeys is not enable, so it's not handled twice.
+ */
+#ifndef MOUSEKEY_ENABLE
+    if (IS_MOUSEKEY_BUTTON(keycode)) {
+        report_mouse_t currentReport = pointing_device_get_report();
+        if (record->event.pressed) {
+            if (keycode == KC_MS_BTN1)
+                currentReport.buttons |= MOUSE_BTN1;
+            else if (keycode == KC_MS_BTN2)
+                currentReport.buttons |= MOUSE_BTN2;
+            else if (keycode == KC_MS_BTN3)
+                currentReport.buttons |= MOUSE_BTN3;
+            else if (keycode == KC_MS_BTN4)
+                currentReport.buttons |= MOUSE_BTN4;
+            else if (keycode == KC_MS_BTN5)
+                currentReport.buttons |= MOUSE_BTN5;
+        } else {
+            if (keycode == KC_MS_BTN1)
+                currentReport.buttons &= ~MOUSE_BTN1;
+            else if (keycode == KC_MS_BTN2)
+                currentReport.buttons &= ~MOUSE_BTN2;
+            else if (keycode == KC_MS_BTN3)
+                currentReport.buttons &= ~MOUSE_BTN3;
+            else if (keycode == KC_MS_BTN4)
+                currentReport.buttons &= ~MOUSE_BTN4;
+            else if (keycode == KC_MS_BTN5)
+                currentReport.buttons &= ~MOUSE_BTN5;
+        }
+        pointing_device_set_report(currentReport);
+    }
+#endif
+    return process_record_user(keycode, record);
+}
+// Hardware Setup
+void keyboard_pre_init_kb(void) {
+    // debug_enable  = true;
+    // debug_matrix  = true;
+    // debug_mouse   = true;
+    // debug_encoder = true;
+    setPinInput(OPT_ENC1);
+    setPinInput(OPT_ENC2);
+    // This is the debug LED.
+    setPinOutput(F7);
+    writePin(F7, debug_enable);
+    /* Ground all output pins connected to ground. This provides additional
+     * pathways to ground. If you're messing with this, know this: driving ANY
+     * of these pins high will cause a short. On the MCU. Ka-blooey.
+     */
+#ifdef UNUSED_PINS
+    const pin_t unused_pins[] = UNUSED_PINS;
+    for (uint8_t i = 0; i < (sizeof(unused_pins) / sizeof(pin_t)); i++) {
+        setPinOutput(unused_pins[i]);
+        writePinLow(unused_pins[i]);
+    }
+#endif
+    keyboard_pre_init_user();
+}
+void pointing_device_init(void) {
+    // initialize ball sensor
+    pmw_spi_init();
+    // initialize the scroll wheel's optical encoder
+    opt_encoder_init();
+}
+bool has_report_changed (report_mouse_t first, report_mouse_t second) {
+    return !(
+        (!first.buttons && first.buttons == second.buttons) &&
+        (!first.x && first.x == second.x) &&
+        (!first.y && first.y == second.y) &&
+        (!first.h && first.h == second.h) &&
+        (!first.v && first.v == second.v) );
+}
+void pointing_device_task(void) {
+    report_mouse_t mouse_report = pointing_device_get_report();
+    process_wheel(&mouse_report);
+    process_mouse(&mouse_report);
+    pointing_device_set_report(mouse_report);
+    if (has_report_changed(mouse_report, pointing_device_get_report())) {
+        pointing_device_send();
+    }
+}
diff --git a/keyboards/ploopyco/mouse/mouse.h b/keyboards/ploopyco/mouse/mouse.h
new file mode 100644
index 000000000..3c89d64d8
--- /dev/null
+++ b/keyboards/ploopyco/mouse/mouse.h
@@ -0,0 +1,40 @@
+/* Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <drashna@live.com>
+ * Copyright 2019 Sunjun Kim
+ * Copyright 2020 Ploopy Corporation
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+#include "quantum.h"
+#include "spi_master.h"
+#include "pmw3600.h"
+#include "analog.h"
+#include "opt_encoder.h"
+#include "pointing_device.h"
+// Sensor defs
+#define OPT_ENC1 F0
+#define OPT_ENC2 F4
+#define OPT_ENC1_MUX 0
+#define OPT_ENC2_MUX 4
+void process_mouse(report_mouse_t* mouse_report);
+void process_mouse_user(report_mouse_t* mouse_report, int16_t x, int16_t y);
+void process_wheel(report_mouse_t* mouse_report);
+void process_wheel_user(report_mouse_t* mouse_report, int16_t h, int16_t v);
+#define LAYOUT(BLL, BL, BM, BR, BRR, BF, BB, BDPI) \
+    { {BL, BM, BR, BF, BB, BRR, BLL, BDPI}, }
diff --git a/keyboards/ploopyco/mouse/readme.md b/keyboards/ploopyco/mouse/readme.md
new file mode 100644
index 000000000..abfa643a4
--- /dev/null
+++ b/keyboards/ploopyco/mouse/readme.md
@@ -0,0 +1,68 @@
+# Ploopyco Mouse
+![Ploopyco Mouse](https://i.redd.it/bf7bkzqzeti51.jpg)
+It's a DIY, QMK Powered Trackball!!!!
+Everything works. However the scroll wheel has some issues and acts very odd.
+* Keyboard Maintainer: [PloopyCo](https://github.com/ploopyco), [Drashna Jael're](https://github.com/drashna/), [Germ](https://github.com/germ/)
+* Hardware Supported: ATMega32u4 8MHz(3.3v)  
+* Hardware Availability: [Store](https://ploopy.co), [GitHub](https://github.com/ploopyco)
+Make example for this keyboard (after setting up your build environment):
+    make ploopyco/mouse:default:flash
+    
+To jump to the bootloader, hold down "Button 4" (immediate right of the Mouse) 
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+# Customzing your PloopyCo Trackball
+While the defaults are designed so that it can be plugged in and used right away, there are a number of things that you may want to change.  Such as adding DPI control, or to use the ball to scroll while holding a button.   To allow for this sort of control, there is a callback for both the scroll wheel and the mouse censor. 
+The default behavior for this is:
+```c
+void process_wheel_user(report_mouse_t* mouse_report, int16_t h, int16_t v) {
+    mouse_report->h = h;
+    mouse_report->v = v;
+}
+void process_mouse_user(report_mouse_t* mouse_report, int16_t x, int16_t y) {
+    mouse_report->x = x;
+    mouse_report->y = y;
+}
+```
+This should allow you to more heavily customize the behavior. 
+Alternatively, the `process_wheel` and `process_mouse` functions can both be replaced too, to allow for even more functionality.
+Additionally, you can change the DPI/CPI or speed of the Mouse by calling `pmw_set_cpi` at any time. And tThe default can be changed by adding a define to the keymap's `config.h` file:
+    #define PMW_CPI 1600
+# Programming QMK-DFU onto the PloopyCo Mouse
+If you would rather have DFU on this board, you can use the QMK-DFU bootloader on the device.  To do so, you want to run: 
+    make ploopyco/trackball:default:production
+Once you have that, you'll need to [ISP Flash](https://docs.qmk.fm/#/isp_flashing_guide) the chip with the new bootloader hex file created (or the production hex), and set the fuses:
+| Fuse     | Setting          |
+|----------|------------------|
+| Low      | `0xDF`           |
+| High     | `0xD8` or `0x98` |
+| Extended | `0xCB`           |
+Original (Caterina) settings: 
+| Fuse     | Setting          |
+|----------|------------------|
+| Low      | `0xFF`           |
+| High     | `0xD8`           |
+| Extended | `0xFE`           |
diff --git a/keyboards/ploopyco/mouse/rules.mk b/keyboards/ploopyco/mouse/rules.mk
new file mode 100644
index 000000000..d77431b67
--- /dev/null
+++ b/keyboards/ploopyco/mouse/rules.mk
@@ -0,0 +1,30 @@
+# MCU name
+MCU = atmega32u4
+# Processor frequency
+F_CPU = 8000000
+# Bootloader selection
+BOOTLOADER = caterina
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes         # Console for debug
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+POINTING_DEVICE_ENABLE = yes
+MOUSEKEY_ENABLE = no        # Mouse keys
+QUANTUM_LIB_SRC += analog.c spi_master.c
+SRC += pmw3600.c opt_encoder.c
diff --git a/keyboards/ploopyco/opt_encoder.c b/keyboards/ploopyco/opt_encoder.c
new file mode 100644
index 000000000..44bcd5eb8
--- /dev/null
+++ b/keyboards/ploopyco/opt_encoder.c
@@ -0,0 +1,211 @@
+/* Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <drashna@live.com>
+ * Copyright 2020 Ploopy Corporation
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "opt_encoder.h"
+/* Setup function for the scroll wheel. Initializes
+   the relevant variables. */
+void opt_encoder_init(void) {
+    state            = HIHI;
+    lohif            = false;
+    hilof            = false;
+    lowA             = 1023;
+    highA            = 0;
+    cLowA            = false;
+    cHighA           = false;
+    lowIndexA        = 0;
+    highIndexA       = 0;
+    lowOverflowA     = false;
+    highOverflowA    = false;
+    lowB             = 1023;
+    highB            = 0;
+    cLowB            = false;
+    cHighB           = false;
+    lowIndexB        = 0;
+    highIndexB       = 0;
+    lowOverflowB     = false;
+    highOverflowB    = false;
+    scrollThresholdA = 0;
+    scrollThresholdB = 0;
+}
+int opt_encoder_handler(int curA, int curB) {
+    if (lowOverflowA == false || highOverflowA == false) calculateThresholdA(curA);
+    if (lowOverflowB == false || highOverflowB == false) calculateThresholdB(curB);
+    bool LO = false;
+    bool HI = true;
+    bool sA, sB;
+    int  ret = 0;
+    if (curA < scrollThresholdA)
+        sA = LO;
+    else
+        sA = HI;
+    if (curB < scrollThresholdB)
+        sB = LO;
+    else
+        sB = HI;
+    if (state == HIHI) {
+        if (sA == LO && sB == HI) {
+            state = LOHI;
+            if (hilof) {
+                ret   = 1;
+                hilof = false;
+            }
+        } else if (sA == HI && sB == LO) {
+            state = HILO;
+            if (lohif) {
+                ret   = -1;
+                lohif = false;
+            }
+        }
+    }
+    else if (state == HILO) {
+        if (sA == HI && sB == HI) {
+            state = HIHI;
+            hilof = true;
+            lohif = false;
+        } else if (sA == LO && sB == LO) {
+            state = LOLO;
+            hilof = true;
+            lohif = false;
+        }
+    }
+    else if (state == LOLO) {
+        if (sA == HI && sB == LO) {
+            state = HILO;
+            if (lohif) {
+                ret   = 1;
+                lohif = false;
+            }
+        } else if (sA == LO && sB == HI) {
+            state = LOHI;
+            if (hilof) {
+                ret   = -1;
+                hilof = false;
+            }
+        }
+    }
+    else {  // state must be LOHI
+        if (sA == HI && sB == HI) {
+            state = HIHI;
+            lohif = true;
+            hilof = false;
+        } else if (sA == LO && sB == LO) {
+            state = LOLO;
+            lohif = true;
+            hilof = false;
+        }
+    }
+    return ret;
+}
+void calculateThresholdA(int curA) { scrollThresholdA = calculateThreshold(curA, &lowA, &highA, &cLowA, &cHighA, arLowA, arHighA, &lowIndexA, &highIndexA, &lowOverflowA, &highOverflowA); }
+void calculateThresholdB(int curB) { scrollThresholdB = calculateThreshold(curB, &lowB, &highB, &cLowB, &cHighB, arLowB, arHighB, &lowIndexB, &highIndexB, &lowOverflowB, &highOverflowB); }
+int calculateThreshold(int cur, int* low, int* high, bool* cLow, bool* cHigh, int arLow[], int arHigh[], int* lowIndex, int* highIndex, bool* lowOverflow, bool* highOverflow) {
+    if (cur < *low) *low = cur;
+    if (cur > *high) *high = cur;
+    int curThresh = thresholdEquation(*low, *high);
+    int range     = *high - *low;
+    // The range is enforced to be over a certain limit because noise
+    // can cause erroneous readings, making these calculations unstable.
+    if (range >= SCROLL_THRESH_RANGE_LIM) {
+        if (cur < curThresh) {
+            if (*cHigh == true) {
+                // We were just high, and now we crossed to low.
+                // high reflects a sample of a high reading.
+                arHigh[*highIndex] = *high;
+                incrementIndex(highIndex, highOverflow);
+                int midpoint = ((*high - *low) / 2) + *low;
+                *low         = midpoint;
+                *high        = midpoint;
+                *cLow        = false;
+                *cHigh       = false;
+            } else {
+                *cLow = true;
+            }
+        }
+        if (cur > curThresh) {
+            if (*cLow == true) {
+                // We were just low, and now we crossed to high.
+                // low reflects a sample of a low reading.
+                arLow[*lowIndex] = *low;
+                incrementIndex(lowIndex, lowOverflow);
+                int midpoint = ((*high - *low) / 2) + *low;
+                *low         = midpoint;
+                *high        = midpoint;
+                *cLow        = false;
+                *cHigh       = false;
+            } else {
+                *cHigh = true;
+            }
+        }
+    }
+    int calcHigh = 0;
+    if (*highOverflow == true) {
+        for (int i = 0; i < SCROLLER_AR_SIZE; i++) {
+            calcHigh += arHigh[i];
+        }
+        calcHigh = calcHigh / SCROLLER_AR_SIZE;
+    } else if (*highIndex != 0) {
+        for (int i = 0; i < *highIndex; i++) {
+            calcHigh += arHigh[i];
+        }
+        calcHigh = calcHigh / *highIndex;
+    } else {
+        calcHigh = *high;
+    }
+    int calcLow = 0;
+    if (*lowOverflow == true) {
+        for (int i = 0; i < SCROLLER_AR_SIZE; i++) {
+            calcLow += arLow[i];
+        }
+        calcLow = calcLow / SCROLLER_AR_SIZE;
+    } else if (*lowIndex != 0) {
+        for (int i = 0; i < *lowIndex; i++) {
+            calcLow += arLow[i];
+        }
+        calcLow = calcLow / *lowIndex;
+    } else {
+        calcLow = *low;
+    }
+    return thresholdEquation(calcLow, calcHigh);
+}
+int thresholdEquation(int lo, int hi) { return ((hi - lo) / 3) + lo; }
+void incrementIndex(int* index, bool* ovflw) {
+    if (*index < SCROLLER_AR_SIZE - 1)
+        (*index)++;
+    else {
+        *index = 0;
+        *ovflw = true;
+    }
+}
diff --git a/keyboards/ploopyco/opt_encoder.h b/keyboards/ploopyco/opt_encoder.h
new file mode 100644
index 000000000..23a170d59
--- /dev/null
+++ b/keyboards/ploopyco/opt_encoder.h
@@ -0,0 +1,66 @@
+/* Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <drashna@live.com>
+ * Copyright 2020 Ploopy Corporation
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+#include <stdbool.h>
+#ifndef SCROLLER_AR_SIZE
+#    define SCROLLER_AR_SIZE 31
+#endif
+#ifndef SCROLL_THRESH_RANGE_LIM
+#    define SCROLL_THRESH_RANGE_LIM 10
+#endif
+enum State { HIHI, HILO, LOLO, LOHI };
+enum State state;
+/* Variables used for scroll wheel functionality. */
+bool lohif;
+bool hilof;
+int  lowA;
+int  highA;
+bool cLowA;
+bool cHighA;
+int  lowIndexA;
+int  highIndexA;
+bool lowOverflowA;
+bool highOverflowA;
+int  lowB;
+int  highB;
+bool cLowB;
+bool cHighB;
+int  lowIndexB;
+int  highIndexB;
+bool lowOverflowB;
+bool highOverflowB;
+int  scrollThresholdA;
+int  scrollThresholdB;
+int  arLowA[SCROLLER_AR_SIZE];
+int  arHighA[SCROLLER_AR_SIZE];
+int  arLowB[SCROLLER_AR_SIZE];
+int  arHighB[SCROLLER_AR_SIZE];
+void calculateThresholdA(int curA);
+void calculateThresholdB(int curB);
+int  calculateThreshold(int cur, int* low, int* high, bool* cLow, bool* cHigh, int arLow[], int arHigh[], int* lowIndex, int* highIndex, bool* lowOverflow, bool* highOverflow);
+int  thresholdEquation(int lo, int hi);
+void incrementIndex(int* index, bool* ovflw);
+void opt_encoder_init(void);
+int  opt_encoder_handler(int curA, int curB);
diff --git a/keyboards/ploopyco/pmw3600.c b/keyboards/ploopyco/pmw3600.c
new file mode 100644
index 000000000..93b47078a
--- /dev/null
+++ b/keyboards/ploopyco/pmw3600.c
@@ -0,0 +1,222 @@
+/* Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <drashna@live.com>
+ * Copyright 2019 Sunjun Kim
+ * Copyright 2020 Ploopy Corporation
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "pmw3600.h"
+#include "pmw3600_firmware.h"
+#ifdef CONSOLE_ENABLE
+#    include "print.h"
+#endif
+bool _inBurst = false;
+#ifndef PMW_CPI
+#    define PMW_CPI 1600
+#endif
+#ifndef SPI_DIVISOR
+#    define SPI_DIVISOR 2
+#endif
+static const int8_t ROTATIONAL_TRANSFORM_ANGLE = 20;
+#ifdef CONSOLE_ENABLE
+void print_byte(uint8_t byte) { dprintf("%c%c%c%c%c%c%c%c|", (byte & 0x80 ? '1' : '0'), (byte & 0x40 ? '1' : '0'), (byte & 0x20 ? '1' : '0'), (byte & 0x10 ? '1' : '0'), (byte & 0x08 ? '1' : '0'), (byte & 0x04 ? '1' : '0'), (byte & 0x02 ? '1' : '0'), (byte & 0x01 ? '1' : '0')); }
+#endif
+bool spi_start_adv(void) {
+    bool status = spi_start(SPI_SS_PIN, false, 3, SPI_DIVISOR);
+    wait_us(1);
+    return status;
+}
+void spi_stop_adv(void) {
+    wait_us(1);
+    spi_stop();
+}
+spi_status_t spi_write_adv(uint8_t reg_addr, uint8_t data) {
+    if (reg_addr != REG_Motion_Burst) {
+        _inBurst = false;
+    }
+    spi_start_adv();
+    // send address of the register, with MSBit = 1 to indicate it's a write
+    spi_status_t status = spi_write(reg_addr | 0x80);
+    status = spi_write(data);
+    // tSCLK-NCS for write operation
+    wait_us(20);
+    // tSWW/tSWR (=120us) minus tSCLK-NCS. Could be shortened, but is looks like a safe lower bound
+    wait_us(100);
+    spi_stop();
+    return status;
+}
+uint8_t spi_read_adv(uint8_t reg_addr) {
+    spi_start_adv();
+    // send adress of the register, with MSBit = 0 to indicate it's a read
+    spi_write(reg_addr & 0x7f);
+    uint8_t data = spi_read();
+    // tSCLK-NCS for read operation is 120ns
+    wait_us(1);
+    //  tSRW/tSRR (=20us) minus tSCLK-NCS
+    wait_us(19);
+    spi_stop();
+    return data;
+}
+void pmw_set_cpi(uint16_t cpi) {
+    int cpival = constrain((cpi / 100) - 1, 0, 0x77);  // limits to 0--119
+    spi_start_adv();
+    spi_write_adv(REG_Config1, cpival);
+    spi_stop();
+}
+bool pmw_spi_init(void) {
+    spi_init();
+    _inBurst = false;
+    spi_stop();
+    spi_start_adv();
+    spi_stop();
+    spi_write_adv(REG_Shutdown, 0xb6); // Shutdown first
+    wait_ms(300);
+    spi_start_adv();
+    wait_us(40);
+    spi_stop_adv();
+    wait_us(40);
+    spi_write_adv(REG_Power_Up_Reset, 0x5a);
+    wait_ms(50);
+    spi_read_adv(REG_Motion);
+    spi_read_adv(REG_Delta_X_L);
+    spi_read_adv(REG_Delta_X_H);
+    spi_read_adv(REG_Delta_Y_L);
+    spi_read_adv(REG_Delta_Y_H);
+    pmw_upload_firmware();
+    spi_write_adv(REG_Angle_Tune, constrain(ROTATIONAL_TRANSFORM_ANGLE, -30, 30));
+    spi_stop_adv();
+    wait_ms(10);
+    pmw_set_cpi(PMW_CPI);
+    wait_ms(1);
+    return pmw_check_signature();
+}
+void pmw_upload_firmware(void) {
+    spi_write_adv(REG_Config2, 0x00);
+    spi_write_adv(REG_SROM_Enable, 0x1d);
+    wait_ms(10);
+    spi_write_adv(REG_SROM_Enable, 0x18);
+    spi_start_adv();
+    spi_write(REG_SROM_Load_Burst | 0x80);
+    wait_us(15);
+    unsigned char c;
+    for (int i = 0; i < firmware_length; i++) {
+        c = (unsigned char)pgm_read_byte(firmware_data + i);
+        spi_write(c);
+        wait_us(15);
+    }
+    wait_us(200);
+    spi_read_adv(REG_SROM_ID);
+    spi_write_adv(REG_Config2, 0x00);
+    spi_stop();
+    wait_ms(10);
+}
+bool pmw_check_signature(void) {
+    uint8_t pid      = spi_read_adv(REG_Product_ID);
+    uint8_t iv_pid   = spi_read_adv(REG_Inverse_Product_ID);
+    uint8_t SROM_ver = spi_read_adv(REG_SROM_ID);
+    return (pid == 0x42 && iv_pid == 0xBD && SROM_ver == 0x04);  // signature for SROM 0x04
+}
+report_pmw_t pmw_read_burst(void) {
+    if (!_inBurst) {
+#ifdef CONSOLE_ENABLE
+        dprintf("burst on");
+#endif
+        spi_write_adv(REG_Motion_Burst, 0x00);
+        _inBurst = true;
+    }
+    spi_start_adv();
+    spi_write(REG_Motion_Burst);
+    wait_us(35);  // waits for tSRAD
+    report_pmw_t data;
+    data.motion = 0;
+    data.dx     = 0;
+    data.mdx    = 0;
+    data.dy     = 0;
+    data.mdx    = 0;
+    data.motion = spi_read();
+    spi_write(0x00);  // skip Observation
+    data.dx  = spi_read();
+    data.mdx = spi_read();
+    data.dy  = spi_read();
+    data.mdy = spi_read();
+    spi_stop();
+#ifdef CONSOLE_ENABLE
+    print_byte(data.motion);
+    print_byte(data.dx);
+    print_byte(data.mdx);
+    print_byte(data.dy);
+    print_byte(data.mdy);
+    dprintf("\n");
+#endif
+    data.isMotion    = (data.motion & 0x80) != 0;
+    data.isOnSurface = (data.motion & 0x08) == 0;
+    data.dx |= (data.mdx << 8);
+    data.dx = data.dx * -1;
+    data.dy |= (data.mdy << 8);
+    // data.dy = data.dy * -1;
+    spi_stop();
+    if (data.motion & 0b111) {  // panic recovery, sometimes burst mode works weird.
+        _inBurst = false;
+    }
+    return data;
+}
diff --git a/keyboards/ploopyco/pmw3600.h b/keyboards/ploopyco/pmw3600.h
new file mode 100644
index 000000000..c1d5e3bad
--- /dev/null
+++ b/keyboards/ploopyco/pmw3600.h
@@ -0,0 +1,103 @@
+/* Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <drashna@live.com>
+ * Copyright 2019 Sunjun Kim
+ * Copyright 2020 Ploopy Corporation
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+#include "spi_master.h"
+// Registers
+#define REG_Product_ID  0x00
+#define REG_Revision_ID 0x01
+#define REG_Motion  0x02
+#define REG_Delta_X_L 0x03
+#define REG_Delta_X_H 0x04
+#define REG_Delta_Y_L 0x05
+#define REG_Delta_Y_H 0x06
+#define REG_SQUAL 0x07
+#define REG_Raw_Data_Sum  0x08
+#define REG_Maximum_Raw_data  0x09
+#define REG_Minimum_Raw_data  0x0A
+#define REG_Shutter_Lower 0x0B
+#define REG_Shutter_Upper 0x0C
+#define REG_Control 0x0D
+#define REG_Config1 0x0F
+#define REG_Config2 0x10
+#define REG_Angle_Tune  0x11
+#define REG_Frame_Capture 0x12
+#define REG_SROM_Enable 0x13
+#define REG_Run_Downshift 0x14
+#define REG_Rest1_Rate_Lower  0x15
+#define REG_Rest1_Rate_Upper  0x16
+#define REG_Rest1_Downshift 0x17
+#define REG_Rest2_Rate_Lower  0x18
+#define REG_Rest2_Rate_Upper  0x19
+#define REG_Rest2_Downshift 0x1A
+#define REG_Rest3_Rate_Lower  0x1B
+#define REG_Rest3_Rate_Upper  0x1C
+#define REG_Observation 0x24
+#define REG_Data_Out_Lower  0x25
+#define REG_Data_Out_Upper  0x26
+#define REG_Raw_Data_Dump 0x29
+#define REG_SROM_ID 0x2A
+#define REG_Min_SQ_Run  0x2B
+#define REG_Raw_Data_Threshold  0x2C
+#define REG_Config5 0x2F
+#define REG_Power_Up_Reset  0x3A
+#define REG_Shutdown  0x3B
+#define REG_Inverse_Product_ID  0x3F
+#define REG_LiftCutoff_Tune3  0x41
+#define REG_Angle_Snap  0x42
+#define REG_LiftCutoff_Tune1  0x4A
+#define REG_Motion_Burst  0x50
+#define REG_LiftCutoff_Tune_Timeout 0x58
+#define REG_LiftCutoff_Tune_Min_Length  0x5A
+#define REG_SROM_Load_Burst 0x62
+#define REG_Lift_Config 0x63
+#define REG_Raw_Data_Burst  0x64
+#define REG_LiftCutoff_Tune2  0x65
+#ifdef CONSOLE_ENABLE
+void print_byte(uint8_t byte);
+#endif
+typedef struct {
+    int8_t  motion;
+    bool    isMotion;     // True if a motion is detected.
+    bool    isOnSurface;  // True when a chip is on a surface
+    int16_t dx;           // displacement on x directions. Unit: Count. (CPI * Count = Inch value)
+    int8_t  mdx;
+    int16_t dy;  // displacement on y directions.
+    int8_t  mdy;
+} report_pmw_t;
+bool spi_start_adv(void);
+void spi_stop_adv(void);
+spi_status_t spi_write_adv(uint8_t reg_addr, uint8_t data);
+uint8_t spi_read_adv(uint8_t reg_addr);
+bool pmw_spi_init(void);
+void pmw_set_cpi(uint16_t cpi);
+void pmw_upload_firmware(void);
+bool pmw_check_signature(void);
+report_pmw_t pmw_read_burst(void);
+#define degToRad(angleInDegrees) ((angleInDegrees)*M_PI / 180.0)
+#define radToDeg(angleInRadians) ((angleInRadians)*180.0 / M_PI)
+#define constrain(amt, low, high) ((amt) < (low) ? (low) : ((amt) > (high) ? (high) : (amt)))
diff --git a/keyboards/ploopyco/pmw3600_firmware.h b/keyboards/ploopyco/pmw3600_firmware.h
new file mode 100644
index 000000000..cca5a6a4d
--- /dev/null
+++ b/keyboards/ploopyco/pmw3600_firmware.h
@@ -0,0 +1,300 @@
+/* Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <drashna@live.com>
+ * Copyright 2019 Sunjun Kim
+ * Copyright 2020 Ploopy Corporation
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+// clang-format off
+// Firmware Blob foor PMW3360
+const uint16_t firmware_length = 4094;
+// clang-format off
+const uint8_t firmware_data[] PROGMEM = {    // SROM 0x04
+0x01, 0x04, 0x8e, 0x96, 0x6e, 0x77, 0x3e, 0xfe, 0x7e, 0x5f, 0x1d, 0xb8, 0xf2, 0x66, 0x4e,
+0xff, 0x5d, 0x19, 0xb0, 0xc2, 0x04, 0x69, 0x54, 0x2a, 0xd6, 0x2e, 0xbf, 0xdd, 0x19, 0xb0,
+0xc3, 0xe5, 0x29, 0xb1, 0xe0, 0x23, 0xa5, 0xa9, 0xb1, 0xc1, 0x00, 0x82, 0x67, 0x4c, 0x1a,
+0x97, 0x8d, 0x79, 0x51, 0x20, 0xc7, 0x06, 0x8e, 0x7c, 0x7c, 0x7a, 0x76, 0x4f, 0xfd, 0x59,
+0x30, 0xe2, 0x46, 0x0e, 0x9e, 0xbe, 0xdf, 0x1d, 0x99, 0x91, 0xa0, 0xa5, 0xa1, 0xa9, 0xd0,
+0x22, 0xc6, 0xef, 0x5c, 0x1b, 0x95, 0x89, 0x90, 0xa2, 0xa7, 0xcc, 0xfb, 0x55, 0x28, 0xb3,
+0xe4, 0x4a, 0xf7, 0x6c, 0x3b, 0xf4, 0x6a, 0x56, 0x2e, 0xde, 0x1f, 0x9d, 0xb8, 0xd3, 0x05,
+0x88, 0x92, 0xa6, 0xce, 0x1e, 0xbe, 0xdf, 0x1d, 0x99, 0xb0, 0xe2, 0x46, 0xef, 0x5c, 0x07,
+0x11, 0x5d, 0x98, 0x0b, 0x9d, 0x94, 0x97, 0xee, 0x4e, 0x45, 0x33, 0x6b, 0x44, 0xc7, 0x29,
+0x56, 0x27, 0x30, 0xc6, 0xa7, 0xd5, 0xf2, 0x56, 0xdf, 0xb4, 0x38, 0x62, 0xcb, 0xa0, 0xb6,
+0xe3, 0x0f, 0x84, 0x06, 0x24, 0x05, 0x65, 0x6f, 0x76, 0x89, 0xb5, 0x77, 0x41, 0x27, 0x82,
+0x66, 0x65, 0x82, 0xcc, 0xd5, 0xe6, 0x20, 0xd5, 0x27, 0x17, 0xc5, 0xf8, 0x03, 0x23, 0x7c,
+0x5f, 0x64, 0xa5, 0x1d, 0xc1, 0xd6, 0x36, 0xcb, 0x4c, 0xd4, 0xdb, 0x66, 0xd7, 0x8b, 0xb1,
+0x99, 0x7e, 0x6f, 0x4c, 0x36, 0x40, 0x06, 0xd6, 0xeb, 0xd7, 0xa2, 0xe4, 0xf4, 0x95, 0x51,
+0x5a, 0x54, 0x96, 0xd5, 0x53, 0x44, 0xd7, 0x8c, 0xe0, 0xb9, 0x40, 0x68, 0xd2, 0x18, 0xe9,
+0xdd, 0x9a, 0x23, 0x92, 0x48, 0xee, 0x7f, 0x43, 0xaf, 0xea, 0x77, 0x38, 0x84, 0x8c, 0x0a,
+0x72, 0xaf, 0x69, 0xf8, 0xdd, 0xf1, 0x24, 0x83, 0xa3, 0xf8, 0x4a, 0xbf, 0xf5, 0x94, 0x13,
+0xdb, 0xbb, 0xd8, 0xb4, 0xb3, 0xa0, 0xfb, 0x45, 0x50, 0x60, 0x30, 0x59, 0x12, 0x31, 0x71,
+0xa2, 0xd3, 0x13, 0xe7, 0xfa, 0xe7, 0xce, 0x0f, 0x63, 0x15, 0x0b, 0x6b, 0x94, 0xbb, 0x37,
+0x83, 0x26, 0x05, 0x9d, 0xfb, 0x46, 0x92, 0xfc, 0x0a, 0x15, 0xd1, 0x0d, 0x73, 0x92, 0xd6,
+0x8c, 0x1b, 0x8c, 0xb8, 0x55, 0x8a, 0xce, 0xbd, 0xfe, 0x8e, 0xfc, 0xed, 0x09, 0x12, 0x83,
+0x91, 0x82, 0x51, 0x31, 0x23, 0xfb, 0xb4, 0x0c, 0x76, 0xad, 0x7c, 0xd9, 0xb4, 0x4b, 0xb2,
+0x67, 0x14, 0x09, 0x9c, 0x7f, 0x0c, 0x18, 0xba, 0x3b, 0xd6, 0x8e, 0x14, 0x2a, 0xe4, 0x1b,
+0x52, 0x9f, 0x2b, 0x7d, 0xe1, 0xfb, 0x6a, 0x33, 0x02, 0xfa, 0xac, 0x5a, 0xf2, 0x3e, 0x88,
+0x7e, 0xae, 0xd1, 0xf3, 0x78, 0xe8, 0x05, 0xd1, 0xe3, 0xdc, 0x21, 0xf6, 0xe1, 0x9a, 0xbd,
+0x17, 0x0e, 0xd9, 0x46, 0x9b, 0x88, 0x03, 0xea, 0xf6, 0x66, 0xbe, 0x0e, 0x1b, 0x50, 0x49,
+0x96, 0x40, 0x97, 0xf1, 0xf1, 0xe4, 0x80, 0xa6, 0x6e, 0xe8, 0x77, 0x34, 0xbf, 0x29, 0x40,
+0x44, 0xc2, 0xff, 0x4e, 0x98, 0xd3, 0x9c, 0xa3, 0x32, 0x2b, 0x76, 0x51, 0x04, 0x09, 0xe7,
+0xa9, 0xd1, 0xa6, 0x32, 0xb1, 0x23, 0x53, 0xe2, 0x47, 0xab, 0xd6, 0xf5, 0x69, 0x5c, 0x3e,
+0x5f, 0xfa, 0xae, 0x45, 0x20, 0xe5, 0xd2, 0x44, 0xff, 0x39, 0x32, 0x6d, 0xfd, 0x27, 0x57,
+0x5c, 0xfd, 0xf0, 0xde, 0xc1, 0xb5, 0x99, 0xe5, 0xf5, 0x1c, 0x77, 0x01, 0x75, 0xc5, 0x6d,
+0x58, 0x92, 0xf2, 0xb2, 0x47, 0x00, 0x01, 0x26, 0x96, 0x7a, 0x30, 0xff, 0xb7, 0xf0, 0xef,
+0x77, 0xc1, 0x8a, 0x5d, 0xdc, 0xc0, 0xd1, 0x29, 0x30, 0x1e, 0x77, 0x38, 0x7a, 0x94, 0xf1,
+0xb8, 0x7a, 0x7e, 0xef, 0xa4, 0xd1, 0xac, 0x31, 0x4a, 0xf2, 0x5d, 0x64, 0x3d, 0xb2, 0xe2,
+0xf0, 0x08, 0x99, 0xfc, 0x70, 0xee, 0x24, 0xa7, 0x7e, 0xee, 0x1e, 0x20, 0x69, 0x7d, 0x44,
+0xbf, 0x87, 0x42, 0xdf, 0x88, 0x3b, 0x0c, 0xda, 0x42, 0xc9, 0x04, 0xf9, 0x45, 0x50, 0xfc,
+0x83, 0x8f, 0x11, 0x6a, 0x72, 0xbc, 0x99, 0x95, 0xf0, 0xac, 0x3d, 0xa7, 0x3b, 0xcd, 0x1c,
+0xe2, 0x88, 0x79, 0x37, 0x11, 0x5f, 0x39, 0x89, 0x95, 0x0a, 0x16, 0x84, 0x7a, 0xf6, 0x8a,
+0xa4, 0x28, 0xe4, 0xed, 0x83, 0x80, 0x3b, 0xb1, 0x23, 0xa5, 0x03, 0x10, 0xf4, 0x66, 0xea,
+0xbb, 0x0c, 0x0f, 0xc5, 0xec, 0x6c, 0x69, 0xc5, 0xd3, 0x24, 0xab, 0xd4, 0x2a, 0xb7, 0x99,
+0x88, 0x76, 0x08, 0xa0, 0xa8, 0x95, 0x7c, 0xd8, 0x38, 0x6d, 0xcd, 0x59, 0x02, 0x51, 0x4b,
+0xf1, 0xb5, 0x2b, 0x50, 0xe3, 0xb6, 0xbd, 0xd0, 0x72, 0xcf, 0x9e, 0xfd, 0x6e, 0xbb, 0x44,
+0xc8, 0x24, 0x8a, 0x77, 0x18, 0x8a, 0x13, 0x06, 0xef, 0x97, 0x7d, 0xfa, 0x81, 0xf0, 0x31,
+0xe6, 0xfa, 0x77, 0xed, 0x31, 0x06, 0x31, 0x5b, 0x54, 0x8a, 0x9f, 0x30, 0x68, 0xdb, 0xe2,
+0x40, 0xf8, 0x4e, 0x73, 0xfa, 0xab, 0x74, 0x8b, 0x10, 0x58, 0x13, 0xdc, 0xd2, 0xe6, 0x78,
+0xd1, 0x32, 0x2e, 0x8a, 0x9f, 0x2c, 0x58, 0x06, 0x48, 0x27, 0xc5, 0xa9, 0x5e, 0x81, 0x47,
+0x89, 0x46, 0x21, 0x91, 0x03, 0x70, 0xa4, 0x3e, 0x88, 0x9c, 0xda, 0x33, 0x0a, 0xce, 0xbc,
+0x8b, 0x8e, 0xcf, 0x9f, 0xd3, 0x71, 0x80, 0x43, 0xcf, 0x6b, 0xa9, 0x51, 0x83, 0x76, 0x30,
+0x82, 0xc5, 0x6a, 0x85, 0x39, 0x11, 0x50, 0x1a, 0x82, 0xdc, 0x1e, 0x1c, 0xd5, 0x7d, 0xa9,
+0x71, 0x99, 0x33, 0x47, 0x19, 0x97, 0xb3, 0x5a, 0xb1, 0xdf, 0xed, 0xa4, 0xf2, 0xe6, 0x26,
+0x84, 0xa2, 0x28, 0x9a, 0x9e, 0xdf, 0xa6, 0x6a, 0xf4, 0xd6, 0xfc, 0x2e, 0x5b, 0x9d, 0x1a,
+0x2a, 0x27, 0x68, 0xfb, 0xc1, 0x83, 0x21, 0x4b, 0x90, 0xe0, 0x36, 0xdd, 0x5b, 0x31, 0x42,
+0x55, 0xa0, 0x13, 0xf7, 0xd0, 0x89, 0x53, 0x71, 0x99, 0x57, 0x09, 0x29, 0xc5, 0xf3, 0x21,
+0xf8, 0x37, 0x2f, 0x40, 0xf3, 0xd4, 0xaf, 0x16, 0x08, 0x36, 0x02, 0xfc, 0x77, 0xc5, 0x8b,
+0x04, 0x90, 0x56, 0xb9, 0xc9, 0x67, 0x9a, 0x99, 0xe8, 0x00, 0xd3, 0x86, 0xff, 0x97, 0x2d,
+0x08, 0xe9, 0xb7, 0xb3, 0x91, 0xbc, 0xdf, 0x45, 0xc6, 0xed, 0x0f, 0x8c, 0x4c, 0x1e, 0xe6,
+0x5b, 0x6e, 0x38, 0x30, 0xe4, 0xaa, 0xe3, 0x95, 0xde, 0xb9, 0xe4, 0x9a, 0xf5, 0xb2, 0x55,
+0x9a, 0x87, 0x9b, 0xf6, 0x6a, 0xb2, 0xf2, 0x77, 0x9a, 0x31, 0xf4, 0x7a, 0x31, 0xd1, 0x1d,
+0x04, 0xc0, 0x7c, 0x32, 0xa2, 0x9e, 0x9a, 0xf5, 0x62, 0xf8, 0x27, 0x8d, 0xbf, 0x51, 0xff,
+0xd3, 0xdf, 0x64, 0x37, 0x3f, 0x2a, 0x6f, 0x76, 0x3a, 0x7d, 0x77, 0x06, 0x9e, 0x77, 0x7f,
+0x5e, 0xeb, 0x32, 0x51, 0xf9, 0x16, 0x66, 0x9a, 0x09, 0xf3, 0xb0, 0x08, 0xa4, 0x70, 0x96,
+0x46, 0x30, 0xff, 0xda, 0x4f, 0xe9, 0x1b, 0xed, 0x8d, 0xf8, 0x74, 0x1f, 0x31, 0x92, 0xb3,
+0x73, 0x17, 0x36, 0xdb, 0x91, 0x30, 0xd6, 0x88, 0x55, 0x6b, 0x34, 0x77, 0x87, 0x7a, 0xe7,
+0xee, 0x06, 0xc6, 0x1c, 0x8c, 0x19, 0x0c, 0x48, 0x46, 0x23, 0x5e, 0x9c, 0x07, 0x5c, 0xbf,
+0xb4, 0x7e, 0xd6, 0x4f, 0x74, 0x9c, 0xe2, 0xc5, 0x50, 0x8b, 0xc5, 0x8b, 0x15, 0x90, 0x60,
+0x62, 0x57, 0x29, 0xd0, 0x13, 0x43, 0xa1, 0x80, 0x88, 0x91, 0x00, 0x44, 0xc7, 0x4d, 0x19,
+0x86, 0xcc, 0x2f, 0x2a, 0x75, 0x5a, 0xfc, 0xeb, 0x97, 0x2a, 0x70, 0xe3, 0x78, 0xd8, 0x91,
+0xb0, 0x4f, 0x99, 0x07, 0xa3, 0x95, 0xea, 0x24, 0x21, 0xd5, 0xde, 0x51, 0x20, 0x93, 0x27,
+0x0a, 0x30, 0x73, 0xa8, 0xff, 0x8a, 0x97, 0xe9, 0xa7, 0x6a, 0x8e, 0x0d, 0xe8, 0xf0, 0xdf,
+0xec, 0xea, 0xb4, 0x6c, 0x1d, 0x39, 0x2a, 0x62, 0x2d, 0x3d, 0x5a, 0x8b, 0x65, 0xf8, 0x90,
+0x05, 0x2e, 0x7e, 0x91, 0x2c, 0x78, 0xef, 0x8e, 0x7a, 0xc1, 0x2f, 0xac, 0x78, 0xee, 0xaf,
+0x28, 0x45, 0x06, 0x4c, 0x26, 0xaf, 0x3b, 0xa2, 0xdb, 0xa3, 0x93, 0x06, 0xb5, 0x3c, 0xa5,
+0xd8, 0xee, 0x8f, 0xaf, 0x25, 0xcc, 0x3f, 0x85, 0x68, 0x48, 0xa9, 0x62, 0xcc, 0x97, 0x8f,
+0x7f, 0x2a, 0xea, 0xe0, 0x15, 0x0a, 0xad, 0x62, 0x07, 0xbd, 0x45, 0xf8, 0x41, 0xd8, 0x36,
+0xcb, 0x4c, 0xdb, 0x6e, 0xe6, 0x3a, 0xe7, 0xda, 0x15, 0xe9, 0x29, 0x1e, 0x12, 0x10, 0xa0,
+0x14, 0x2c, 0x0e, 0x3d, 0xf4, 0xbf, 0x39, 0x41, 0x92, 0x75, 0x0b, 0x25, 0x7b, 0xa3, 0xce,
+0x39, 0x9c, 0x15, 0x64, 0xc8, 0xfa, 0x3d, 0xef, 0x73, 0x27, 0xfe, 0x26, 0x2e, 0xce, 0xda,
+0x6e, 0xfd, 0x71, 0x8e, 0xdd, 0xfe, 0x76, 0xee, 0xdc, 0x12, 0x5c, 0x02, 0xc5, 0x3a, 0x4e,
+0x4e, 0x4f, 0xbf, 0xca, 0x40, 0x15, 0xc7, 0x6e, 0x8d, 0x41, 0xf1, 0x10, 0xe0, 0x4f, 0x7e,
+0x97, 0x7f, 0x1c, 0xae, 0x47, 0x8e, 0x6b, 0xb1, 0x25, 0x31, 0xb0, 0x73, 0xc7, 0x1b, 0x97,
+0x79, 0xf9, 0x80, 0xd3, 0x66, 0x22, 0x30, 0x07, 0x74, 0x1e, 0xe4, 0xd0, 0x80, 0x21, 0xd6,
+0xee, 0x6b, 0x6c, 0x4f, 0xbf, 0xf5, 0xb7, 0xd9, 0x09, 0x87, 0x2f, 0xa9, 0x14, 0xbe, 0x27,
+0xd9, 0x72, 0x50, 0x01, 0xd4, 0x13, 0x73, 0xa6, 0xa7, 0x51, 0x02, 0x75, 0x25, 0xe1, 0xb3,
+0x45, 0x34, 0x7d, 0xa8, 0x8e, 0xeb, 0xf3, 0x16, 0x49, 0xcb, 0x4f, 0x8c, 0xa1, 0xb9, 0x36,
+0x85, 0x39, 0x75, 0x5d, 0x08, 0x00, 0xae, 0xeb, 0xf6, 0xea, 0xd7, 0x13, 0x3a, 0x21, 0x5a,
+0x5f, 0x30, 0x84, 0x52, 0x26, 0x95, 0xc9, 0x14, 0xf2, 0x57, 0x55, 0x6b, 0xb1, 0x10, 0xc2,
+0xe1, 0xbd, 0x3b, 0x51, 0xc0, 0xb7, 0x55, 0x4c, 0x71, 0x12, 0x26, 0xc7, 0x0d, 0xf9, 0x51,
+0xa4, 0x38, 0x02, 0x05, 0x7f, 0xb8, 0xf1, 0x72, 0x4b, 0xbf, 0x71, 0x89, 0x14, 0xf3, 0x77,
+0x38, 0xd9, 0x71, 0x24, 0xf3, 0x00, 0x11, 0xa1, 0xd8, 0xd4, 0x69, 0x27, 0x08, 0x37, 0x35,
+0xc9, 0x11, 0x9d, 0x90, 0x1c, 0x0e, 0xe7, 0x1c, 0xff, 0x2d, 0x1e, 0xe8, 0x92, 0xe1, 0x18,
+0x10, 0x95, 0x7c, 0xe0, 0x80, 0xf4, 0x96, 0x43, 0x21, 0xf9, 0x75, 0x21, 0x64, 0x38, 0xdd,
+0x9f, 0x1e, 0x95, 0x16, 0xda, 0x56, 0x1d, 0x4f, 0x9a, 0x53, 0xb2, 0xe2, 0xe4, 0x18, 0xcb,
+0x6b, 0x1a, 0x65, 0xeb, 0x56, 0xc6, 0x3b, 0xe5, 0xfe, 0xd8, 0x26, 0x3f, 0x3a, 0x84, 0x59,
+0x72, 0x66, 0xa2, 0xf3, 0x75, 0xff, 0xfb, 0x60, 0xb3, 0x22, 0xad, 0x3f, 0x2d, 0x6b, 0xf9,
+0xeb, 0xea, 0x05, 0x7c, 0xd8, 0x8f, 0x6d, 0x2c, 0x98, 0x9e, 0x2b, 0x93, 0xf1, 0x5e, 0x46,
+0xf0, 0x87, 0x49, 0x29, 0x73, 0x68, 0xd7, 0x7f, 0xf9, 0xf0, 0xe5, 0x7d, 0xdb, 0x1d, 0x75,
+0x19, 0xf3, 0xc4, 0x58, 0x9b, 0x17, 0x88, 0xa8, 0x92, 0xe0, 0xbe, 0xbd, 0x8b, 0x1d, 0x8d,
+0x9f, 0x56, 0x76, 0xad, 0xaf, 0x29, 0xe2, 0xd9, 0xd5, 0x52, 0xf6, 0xb5, 0x56, 0x35, 0x57,
+0x3a, 0xc8, 0xe1, 0x56, 0x43, 0x19, 0x94, 0xd3, 0x04, 0x9b, 0x6d, 0x35, 0xd8, 0x0b, 0x5f,
+0x4d, 0x19, 0x8e, 0xec, 0xfa, 0x64, 0x91, 0x0a, 0x72, 0x20, 0x2b, 0xbc, 0x1a, 0x4a, 0xfe,
+0x8b, 0xfd, 0xbb, 0xed, 0x1b, 0x23, 0xea, 0xad, 0x72, 0x82, 0xa1, 0x29, 0x99, 0x71, 0xbd,
+0xf0, 0x95, 0xc1, 0x03, 0xdd, 0x7b, 0xc2, 0xb2, 0x3c, 0x28, 0x54, 0xd3, 0x68, 0xa4, 0x72,
+0xc8, 0x66, 0x96, 0xe0, 0xd1, 0xd8, 0x7f, 0xf8, 0xd1, 0x26, 0x2b, 0xf7, 0xad, 0xba, 0x55,
+0xca, 0x15, 0xb9, 0x32, 0xc3, 0xe5, 0x88, 0x97, 0x8e, 0x5c, 0xfb, 0x92, 0x25, 0x8b, 0xbf,
+0xa2, 0x45, 0x55, 0x7a, 0xa7, 0x6f, 0x8b, 0x57, 0x5b, 0xcf, 0x0e, 0xcb, 0x1d, 0xfb, 0x20,
+0x82, 0x77, 0xa8, 0x8c, 0xcc, 0x16, 0xce, 0x1d, 0xfa, 0xde, 0xcc, 0x0b, 0x62, 0xfe, 0xcc,
+0xe1, 0xb7, 0xf0, 0xc3, 0x81, 0x64, 0x73, 0x40, 0xa0, 0xc2, 0x4d, 0x89, 0x11, 0x75, 0x33,
+0x55, 0x33, 0x8d, 0xe8, 0x4a, 0xfd, 0xea, 0x6e, 0x30, 0x0b, 0xd7, 0x31, 0x2c, 0xde, 0x47,
+0xe3, 0xbf, 0xf8, 0x55, 0x42, 0xe2, 0x7f, 0x59, 0xe5, 0x17, 0xef, 0x99, 0x34, 0x69, 0x91,
+0xb1, 0x23, 0x8e, 0x20, 0x87, 0x2d, 0xa8, 0xfe, 0xd5, 0x8a, 0xf3, 0x84, 0x3a, 0xf0, 0x37,
+0xe4, 0x09, 0x00, 0x54, 0xee, 0x67, 0x49, 0x93, 0xe4, 0x81, 0x70, 0xe3, 0x90, 0x4d, 0xef,
+0xfe, 0x41, 0xb7, 0x99, 0x7b, 0xc1, 0x83, 0xba, 0x62, 0x12, 0x6f, 0x7d, 0xde, 0x6b, 0xaf,
+0xda, 0x16, 0xf9, 0x55, 0x51, 0xee, 0xa6, 0x0c, 0x2b, 0x02, 0xa3, 0xfd, 0x8d, 0xfb, 0x30,
+0x17, 0xe4, 0x6f, 0xdf, 0x36, 0x71, 0xc4, 0xca, 0x87, 0x25, 0x48, 0xb0, 0x47, 0xec, 0xea,
+0xb4, 0xbf, 0xa5, 0x4d, 0x9b, 0x9f, 0x02, 0x93, 0xc4, 0xe3, 0xe4, 0xe8, 0x42, 0x2d, 0x68,
+0x81, 0x15, 0x0a, 0xeb, 0x84, 0x5b, 0xd6, 0xa8, 0x74, 0xfb, 0x7d, 0x1d, 0xcb, 0x2c, 0xda,
+0x46, 0x2a, 0x76, 0x62, 0xce, 0xbc, 0x5c, 0x9e, 0x8b, 0xe7, 0xcf, 0xbe, 0x78, 0xf5, 0x7c,
+0xeb, 0xb3, 0x3a, 0x9c, 0xaa, 0x6f, 0xcc, 0x72, 0xd1, 0x59, 0xf2, 0x11, 0x23, 0xd6, 0x3f,
+0x48, 0xd1, 0xb7, 0xce, 0xb0, 0xbf, 0xcb, 0xea, 0x80, 0xde, 0x57, 0xd4, 0x5e, 0x97, 0x2f,
+0x75, 0xd1, 0x50, 0x8e, 0x80, 0x2c, 0x66, 0x79, 0xbf, 0x72, 0x4b, 0xbd, 0x8a, 0x81, 0x6c,
+0xd3, 0xe1, 0x01, 0xdc, 0xd2, 0x15, 0x26, 0xc5, 0x36, 0xda, 0x2c, 0x1a, 0xc0, 0x27, 0x94,
+0xed, 0xb7, 0x9b, 0x85, 0x0b, 0x5e, 0x80, 0x97, 0xc5, 0xec, 0x4f, 0xec, 0x88, 0x5d, 0x50,
+0x07, 0x35, 0x47, 0xdc, 0x0b, 0x3b, 0x3d, 0xdd, 0x60, 0xaf, 0xa8, 0x5d, 0x81, 0x38, 0x24,
+0x25, 0x5d, 0x5c, 0x15, 0xd1, 0xde, 0xb3, 0xab, 0xec, 0x05, 0x69, 0xef, 0x83, 0xed, 0x57,
+0x54, 0xb8, 0x64, 0x64, 0x11, 0x16, 0x32, 0x69, 0xda, 0x9f, 0x2d, 0x7f, 0x36, 0xbb, 0x44,
+0x5a, 0x34, 0xe8, 0x7f, 0xbf, 0x03, 0xeb, 0x00, 0x7f, 0x59, 0x68, 0x22, 0x79, 0xcf, 0x73,
+0x6c, 0x2c, 0x29, 0xa7, 0xa1, 0x5f, 0x38, 0xa1, 0x1d, 0xf0, 0x20, 0x53, 0xe0, 0x1a, 0x63,
+0x14, 0x58, 0x71, 0x10, 0xaa, 0x08, 0x0c, 0x3e, 0x16, 0x1a, 0x60, 0x22, 0x82, 0x7f, 0xba,
+0xa4, 0x43, 0xa0, 0xd0, 0xac, 0x1b, 0xd5, 0x6b, 0x64, 0xb5, 0x14, 0x93, 0x31, 0x9e, 0x53,
+0x50, 0xd0, 0x57, 0x66, 0xee, 0x5a, 0x4f, 0xfb, 0x03, 0x2a, 0x69, 0x58, 0x76, 0xf1, 0x83,
+0xf7, 0x4e, 0xba, 0x8c, 0x42, 0x06, 0x60, 0x5d, 0x6d, 0xce, 0x60, 0x88, 0xae, 0xa4, 0xc3,
+0xf1, 0x03, 0xa5, 0x4b, 0x98, 0xa1, 0xff, 0x67, 0xe1, 0xac, 0xa2, 0xb8, 0x62, 0xd7, 0x6f,
+0xa0, 0x31, 0xb4, 0xd2, 0x77, 0xaf, 0x21, 0x10, 0x06, 0xc6, 0x9a, 0xff, 0x1d, 0x09, 0x17,
+0x0e, 0x5f, 0xf1, 0xaa, 0x54, 0x34, 0x4b, 0x45, 0x8a, 0x87, 0x63, 0xa6, 0xdc, 0xf9, 0x24,
+0x30, 0x67, 0xc6, 0xb2, 0xd6, 0x61, 0x33, 0x69, 0xee, 0x50, 0x61, 0x57, 0x28, 0xe7, 0x7e,
+0xee, 0xec, 0x3a, 0x5a, 0x73, 0x4e, 0xa8, 0x8d, 0xe4, 0x18, 0xea, 0xec, 0x41, 0x64, 0xc8,
+0xe2, 0xe8, 0x66, 0xb6, 0x2d, 0xb6, 0xfb, 0x6a, 0x6c, 0x16, 0xb3, 0xdd, 0x46, 0x43, 0xb9,
+0x73, 0x00, 0x6a, 0x71, 0xed, 0x4e, 0x9d, 0x25, 0x1a, 0xc3, 0x3c, 0x4a, 0x95, 0x15, 0x99,
+0x35, 0x81, 0x14, 0x02, 0xd6, 0x98, 0x9b, 0xec, 0xd8, 0x23, 0x3b, 0x84, 0x29, 0xaf, 0x0c,
+0x99, 0x83, 0xa6, 0x9a, 0x34, 0x4f, 0xfa, 0xe8, 0xd0, 0x3c, 0x4b, 0xd0, 0xfb, 0xb6, 0x68,
+0xb8, 0x9e, 0x8f, 0xcd, 0xf7, 0x60, 0x2d, 0x7a, 0x22, 0xe5, 0x7d, 0xab, 0x65, 0x1b, 0x95,
+0xa7, 0xa8, 0x7f, 0xb6, 0x77, 0x47, 0x7b, 0x5f, 0x8b, 0x12, 0x72, 0xd0, 0xd4, 0x91, 0xef,
+0xde, 0x19, 0x50, 0x3c, 0xa7, 0x8b, 0xc4, 0xa9, 0xb3, 0x23, 0xcb, 0x76, 0xe6, 0x81, 0xf0,
+0xc1, 0x04, 0x8f, 0xa3, 0xb8, 0x54, 0x5b, 0x97, 0xac, 0x19, 0xff, 0x3f, 0x55, 0x27, 0x2f,
+0xe0, 0x1d, 0x42, 0x9b, 0x57, 0xfc, 0x4b, 0x4e, 0x0f, 0xce, 0x98, 0xa9, 0x43, 0x57, 0x03,
+0xbd, 0xe7, 0xc8, 0x94, 0xdf, 0x6e, 0x36, 0x73, 0x32, 0xb4, 0xef, 0x2e, 0x85, 0x7a, 0x6e,
+0xfc, 0x6c, 0x18, 0x82, 0x75, 0x35, 0x90, 0x07, 0xf3, 0xe4, 0x9f, 0x3e, 0xdc, 0x68, 0xf3,
+0xb5, 0xf3, 0x19, 0x80, 0x92, 0x06, 0x99, 0xa2, 0xe8, 0x6f, 0xff, 0x2e, 0x7f, 0xae, 0x42,
+0xa4, 0x5f, 0xfb, 0xd4, 0x0e, 0x81, 0x2b, 0xc3, 0x04, 0xff, 0x2b, 0xb3, 0x74, 0x4e, 0x36,
+0x5b, 0x9c, 0x15, 0x00, 0xc6, 0x47, 0x2b, 0xe8, 0x8b, 0x3d, 0xf1, 0x9c, 0x03, 0x9a, 0x58,
+0x7f, 0x9b, 0x9c, 0xbf, 0x85, 0x49, 0x79, 0x35, 0x2e, 0x56, 0x7b, 0x41, 0x14, 0x39, 0x47,
+0x83, 0x26, 0xaa, 0x07, 0x89, 0x98, 0x11, 0x1b, 0x86, 0xe7, 0x73, 0x7a, 0xd8, 0x7d, 0x78,
+0x61, 0x53, 0xe9, 0x79, 0xf5, 0x36, 0x8d, 0x44, 0x92, 0x84, 0xf9, 0x13, 0x50, 0x58, 0x3b,
+0xa4, 0x6a, 0x36, 0x65, 0x49, 0x8e, 0x3c, 0x0e, 0xf1, 0x6f, 0xd2, 0x84, 0xc4, 0x7e, 0x8e,
+0x3f, 0x39, 0xae, 0x7c, 0x84, 0xf1, 0x63, 0x37, 0x8e, 0x3c, 0xcc, 0x3e, 0x44, 0x81, 0x45,
+0xf1, 0x4b, 0xb9, 0xed, 0x6b, 0x36, 0x5d, 0xbb, 0x20, 0x60, 0x1a, 0x0f, 0xa3, 0xaa, 0x55,
+0x77, 0x3a, 0xa9, 0xae, 0x37, 0x4d, 0xba, 0xb8, 0x86, 0x6b, 0xbc, 0x08, 0x50, 0xf6, 0xcc,
+0xa4, 0xbd, 0x1d, 0x40, 0x72, 0xa5, 0x86, 0xfa, 0xe2, 0x10, 0xae, 0x3d, 0x58, 0x4b, 0x97,
+0xf3, 0x43, 0x74, 0xa9, 0x9e, 0xeb, 0x21, 0xb7, 0x01, 0xa4, 0x86, 0x93, 0x97, 0xee, 0x2f,
+0x4f, 0x3b, 0x86, 0xa1, 0x41, 0x6f, 0x41, 0x26, 0x90, 0x78, 0x5c, 0x7f, 0x30, 0x38, 0x4b,
+0x3f, 0xaa, 0xec, 0xed, 0x5c, 0x6f, 0x0e, 0xad, 0x43, 0x87, 0xfd, 0x93, 0x35, 0xe6, 0x01,
+0xef, 0x41, 0x26, 0x90, 0x99, 0x9e, 0xfb, 0x19, 0x5b, 0xad, 0xd2, 0x91, 0x8a, 0xe0, 0x46,
+0xaf, 0x65, 0xfa, 0x4f, 0x84, 0xc1, 0xa1, 0x2d, 0xcf, 0x45, 0x8b, 0xd3, 0x85, 0x50, 0x55,
+0x7c, 0xf9, 0x67, 0x88, 0xd4, 0x4e, 0xe9, 0xd7, 0x6b, 0x61, 0x54, 0xa1, 0xa4, 0xa6, 0xa2,
+0xc2, 0xbf, 0x30, 0x9c, 0x40, 0x9f, 0x5f, 0xd7, 0x69, 0x2b, 0x24, 0x82, 0x5e, 0xd9, 0xd6,
+0xa7, 0x12, 0x54, 0x1a, 0xf7, 0x55, 0x9f, 0x76, 0x50, 0xa9, 0x95, 0x84, 0xe6, 0x6b, 0x6d,
+0xb5, 0x96, 0x54, 0xd6, 0xcd, 0xb3, 0xa1, 0x9b, 0x46, 0xa7, 0x94, 0x4d, 0xc4, 0x94, 0xb4,
+0x98, 0xe3, 0xe1, 0xe2, 0x34, 0xd5, 0x33, 0x16, 0x07, 0x54, 0xcd, 0xb7, 0x77, 0x53, 0xdb,
+0x4f, 0x4d, 0x46, 0x9d, 0xe9, 0xd4, 0x9c, 0x8a, 0x36, 0xb6, 0xb8, 0x38, 0x26, 0x6c, 0x0e,
+0xff, 0x9c, 0x1b, 0x43, 0x8b, 0x80, 0xcc, 0xb9, 0x3d, 0xda, 0xc7, 0xf1, 0x8a, 0xf2, 0x6d,
+0xb8, 0xd7, 0x74, 0x2f, 0x7e, 0x1e, 0xb7, 0xd3, 0x4a, 0xb4, 0xac, 0xfc, 0x79, 0x48, 0x6c,
+0xbc, 0x96, 0xb6, 0x94, 0x46, 0x57, 0x2d, 0xb0, 0xa3, 0xfc, 0x1e, 0xb9, 0x52, 0x60, 0x85,
+0x2d, 0x41, 0xd0, 0x43, 0x01, 0x1e, 0x1c, 0xd5, 0x7d, 0xfc, 0xf3, 0x96, 0x0d, 0xc7, 0xcb,
+0x2a, 0x29, 0x9a, 0x93, 0xdd, 0x88, 0x2d, 0x37, 0x5d, 0xaa, 0xfb, 0x49, 0x68, 0xa0, 0x9c,
+0x50, 0x86, 0x7f, 0x68, 0x56, 0x57, 0xf9, 0x79, 0x18, 0x39, 0xd4, 0xe0, 0x01, 0x84, 0x33,
+0x61, 0xca, 0xa5, 0xd2, 0xd6, 0xe4, 0xc9, 0x8a, 0x4a, 0x23, 0x44, 0x4e, 0xbc, 0xf0, 0xdc,
+0x24, 0xa1, 0xa0, 0xc4, 0xe2, 0x07, 0x3c, 0x10, 0xc4, 0xb5, 0x25, 0x4b, 0x65, 0x63, 0xf4,
+0x80, 0xe7, 0xcf, 0x61, 0xb1, 0x71, 0x82, 0x21, 0x87, 0x2c, 0xf5, 0x91, 0x00, 0x32, 0x0c,
+0xec, 0xa9, 0xb5, 0x9a, 0x74, 0x85, 0xe3, 0x36, 0x8f, 0x76, 0x4f, 0x9c, 0x6d, 0xce, 0xbc,
+0xad, 0x0a, 0x4b, 0xed, 0x76, 0x04, 0xcb, 0xc3, 0xb9, 0x33, 0x9e, 0x01, 0x93, 0x96, 0x69,
+0x7d, 0xc5, 0xa2, 0x45, 0x79, 0x9b, 0x04, 0x5c, 0x84, 0x09, 0xed, 0x88, 0x43, 0xc7, 0xab,
+0x93, 0x14, 0x26, 0xa1, 0x40, 0xb5, 0xce, 0x4e, 0xbf, 0x2a, 0x42, 0x85, 0x3e, 0x2c, 0x3b,
+0x54, 0xe8, 0x12, 0x1f, 0x0e, 0x97, 0x59, 0xb2, 0x27, 0x89, 0xfa, 0xf2, 0xdf, 0x8e, 0x68,
+0x59, 0xdc, 0x06, 0xbc, 0xb6, 0x85, 0x0d, 0x06, 0x22, 0xec, 0xb1, 0xcb, 0xe5, 0x04, 0xe6,
+0x3d, 0xb3, 0xb0, 0x41, 0x73, 0x08, 0x3f, 0x3c, 0x58, 0x86, 0x63, 0xeb, 0x50, 0xee, 0x1d,
+0x2c, 0x37, 0x74, 0xa9, 0xd3, 0x18, 0xa3, 0x47, 0x6e, 0x93, 0x54, 0xad, 0x0a, 0x5d, 0xb8,
+0x2a, 0x55, 0x5d, 0x78, 0xf6, 0xee, 0xbe, 0x8e, 0x3c, 0x76, 0x69, 0xb9, 0x40, 0xc2, 0x34,
+0xec, 0x2a, 0xb9, 0xed, 0x7e, 0x20, 0xe4, 0x8d, 0x00, 0x38, 0xc7, 0xe6, 0x8f, 0x44, 0xa8,
+0x86, 0xce, 0xeb, 0x2a, 0xe9, 0x90, 0xf1, 0x4c, 0xdf, 0x32, 0xfb, 0x73, 0x1b, 0x6d, 0x92,
+0x1e, 0x95, 0xfe, 0xb4, 0xdb, 0x65, 0xdf, 0x4d, 0x23, 0x54, 0x89, 0x48, 0xbf, 0x4a, 0x2e,
+0x70, 0xd6, 0xd7, 0x62, 0xb4, 0x33, 0x29, 0xb1, 0x3a, 0x33, 0x4c, 0x23, 0x6d, 0xa6, 0x76,
+0xa5, 0x21, 0x63, 0x48, 0xe6, 0x90, 0x5d, 0xed, 0x90, 0x95, 0x0b, 0x7a, 0x84, 0xbe, 0xb8,
+0x0d, 0x5e, 0x63, 0x0c, 0x62, 0x26, 0x4c, 0x14, 0x5a, 0xb3, 0xac, 0x23, 0xa4, 0x74, 0xa7,
+0x6f, 0x33, 0x30, 0x05, 0x60, 0x01, 0x42, 0xa0, 0x28, 0xb7, 0xee, 0x19, 0x38, 0xf1, 0x64,
+0x80, 0x82, 0x43, 0xe1, 0x41, 0x27, 0x1f, 0x1f, 0x90, 0x54, 0x7a, 0xd5, 0x23, 0x2e, 0xd1,
+0x3d, 0xcb, 0x28, 0xba, 0x58, 0x7f, 0xdc, 0x7c, 0x91, 0x24, 0xe9, 0x28, 0x51, 0x83, 0x6e,
+0xc5, 0x56, 0x21, 0x42, 0xed, 0xa0, 0x56, 0x22, 0xa1, 0x40, 0x80, 0x6b, 0xa8, 0xf7, 0x94,
+0xca, 0x13, 0x6b, 0x0c, 0x39, 0xd9, 0xfd, 0xe9, 0xf3, 0x6f, 0xa6, 0x9e, 0xfc, 0x70, 0x8a,
+0xb3, 0xbc, 0x59, 0x3c, 0x1e, 0x1d, 0x6c, 0xf9, 0x7c, 0xaf, 0xf9, 0x88, 0x71, 0x95, 0xeb,
+0x57, 0x00, 0xbd, 0x9f, 0x8c, 0x4f, 0xe1, 0x24, 0x83, 0xc5, 0x22, 0xea, 0xfd, 0xd3, 0x0c,
+0xe2, 0x17, 0x18, 0x7c, 0x6a, 0x4c, 0xde, 0x77, 0xb4, 0x53, 0x9b, 0x4c, 0x81, 0xcd, 0x23,
+0x60, 0xaa, 0x0e, 0x25, 0x73, 0x9c, 0x02, 0x79, 0x32, 0x30, 0xdf, 0x74, 0xdf, 0x75, 0x19,
+0xf4, 0xa5, 0x14, 0x5c, 0xf7, 0x7a, 0xa8, 0xa5, 0x91, 0x84, 0x7c, 0x60, 0x03, 0x06, 0x3b,
+0xcd, 0x50, 0xb6, 0x27, 0x9c, 0xfe, 0xb1, 0xdd, 0xcc, 0xd3, 0xb0, 0x59, 0x24, 0xb2, 0xca,
+0xe2, 0x1c, 0x81, 0x22, 0x9d, 0x07, 0x8f, 0x8e, 0xb9, 0xbe, 0x4e, 0xfa, 0xfc, 0x39, 0x65,
+0xba, 0xbf, 0x9d, 0x12, 0x37, 0x5e, 0x97, 0x7e, 0xf3, 0x89, 0xf5, 0x5d, 0xf5, 0xe3, 0x09,
+0x8c, 0x62, 0xb5, 0x20, 0x9d, 0x0c, 0x53, 0x8a, 0x68, 0x1b, 0xd2, 0x8f, 0x75, 0x17, 0x5d,
+0xd4, 0xe5, 0xda, 0x75, 0x62, 0x19, 0x14, 0x6a, 0x26, 0x2d, 0xeb, 0xf8, 0xaf, 0x37, 0xf0,
+0x6c, 0xa4, 0x55, 0xb1, 0xbc, 0xe2, 0x33, 0xc0, 0x9a, 0xca, 0xb0, 0x11, 0x49, 0x4f, 0x68,
+0x9b, 0x3b, 0x6b, 0x3c, 0xcc, 0x13, 0xf6, 0xc7, 0x85, 0x61, 0x68, 0x42, 0xae, 0xbb, 0xdd,
+0xcd, 0x45, 0x16, 0x29, 0x1d, 0xea, 0xdb, 0xc8, 0x03, 0x94, 0x3c, 0xee, 0x4f, 0x82, 0x11,
+0xc3, 0xec, 0x28, 0xbd, 0x97, 0x05, 0x99, 0xde, 0xd7, 0xbb, 0x5e, 0x22, 0x1f, 0xd4, 0xeb,
+0x64, 0xd9, 0x92, 0xd9, 0x85, 0xb7, 0x6a, 0x05, 0x6a, 0xe4, 0x24, 0x41, 0xf1, 0xcd, 0xf0,
+0xd8, 0x3f, 0xf8, 0x9e, 0x0e, 0xcd, 0x0b, 0x7a, 0x70, 0x6b, 0x5a, 0x75, 0x0a, 0x6a, 0x33,
+0x88, 0xec, 0x17, 0x75, 0x08, 0x70, 0x10, 0x2f, 0x24, 0xcf, 0xc4, 0xe9, 0x42, 0x00, 0x61,
+0x94, 0xca, 0x1f, 0x3a, 0x76, 0x06, 0xfa, 0xd2, 0x48, 0x81, 0xf0, 0x77, 0x60, 0x03, 0x45,
+0xd9, 0x61, 0xf4, 0xa4, 0x6f, 0x3d, 0xd9, 0x30, 0xc3, 0x04, 0x6b, 0x54, 0x2a, 0xb7, 0xec,
+0x3b, 0xf4, 0x4b, 0xf5, 0x68, 0x52, 0x26, 0xce, 0xff, 0x5d, 0x19, 0x91, 0xa0, 0xa3, 0xa5,
+0xa9, 0xb1, 0xe0, 0x23, 0xc4, 0x0a, 0x77, 0x4d, 0xf9, 0x51, 0x20, 0xa3, 0xa5, 0xa9, 0xb1,
+0xc1, 0x00, 0x82, 0x86, 0x8e, 0x7f, 0x5d, 0x19, 0x91, 0xa0, 0xa3, 0xc4, 0xeb, 0x54, 0x0b,
+0x75, 0x68, 0x52, 0x07, 0x8c, 0x9a, 0x97, 0x8d, 0x79, 0x70, 0x62, 0x46, 0xef, 0x5c, 0x1b,
+0x95, 0x89, 0x71, 0x41, 0xe1, 0x21, 0xa1, 0xa1, 0xa1, 0xc0, 0x02, 0x67, 0x4c, 0x1a, 0xb6,
+0xcf, 0xfd, 0x78, 0x53, 0x24, 0xab, 0xb5, 0xc9, 0xf1, 0x60, 0x23, 0xa5, 0xc8, 0x12, 0x87,
+0x6d, 0x58, 0x13, 0x85, 0x88, 0x92, 0x87, 0x6d, 0x58, 0x32, 0xc7, 0x0c, 0x9a, 0x97, 0xac,
+0xda, 0x36, 0xee, 0x5e, 0x3e, 0xdf, 0x1d, 0xb8, 0xf2, 0x66, 0x2f, 0xbd, 0xf8, 0x72, 0x47,
+0xed, 0x58, 0x13, 0x85, 0x88, 0x92, 0x87, 0x8c, 0x7b, 0x55, 0x09, 0x90, 0xa2, 0xc6, 0xef,
+0x3d, 0xf8, 0x53, 0x24, 0xab, 0xd4, 0x2a, 0xb7, 0xec, 0x5a, 0x36, 0xee, 0x5e, 0x3e, 0xdf,
+0x3c, 0xfa, 0x76, 0x4f, 0xfd, 0x59, 0x30, 0xe2, 0x46, 0xef, 0x3d, 0xf8, 0x53, 0x05, 0x69,
+0x31, 0xc1, 0x00, 0x82, 0x86, 0x8e, 0x7f, 0x5d, 0x19, 0xb0, 0xe2, 0x27, 0xcc, 0xfb, 0x74,
+0x4b, 0x14, 0x8b, 0x94, 0x8b, 0x75, 0x68, 0x33, 0xc5, 0x08, 0x92, 0x87, 0x8c, 0x9a, 0xb6,
+0xcf, 0x1c, 0xba, 0xd7, 0x0d, 0x98, 0xb2, 0xe6, 0x2f, 0xdc, 0x1b, 0x95, 0x89, 0x71, 0x60,
+0x23, 0xc4, 0x0a, 0x96, 0x8f, 0x9c, 0xba, 0xf6, 0x6e, 0x3f, 0xfc, 0x5b, 0x15, 0xa8, 0xd2,
+0x26, 0xaf, 0xbd, 0xf8, 0x72, 0x66, 0x2f, 0xdc, 0x1b, 0xb4, 0xcb, 0x14, 0x8b, 0x94, 0xaa,
+0xb7, 0xcd, 0xf9, 0x51, 0x01, 0x80, 0x82, 0x86, 0x6f, 0x3d, 0xd9, 0x30, 0xe2, 0x27, 0xcc,
+0xfb, 0x74, 0x4b, 0x14, 0xaa, 0xb7, 0xcd, 0xf9, 0x70, 0x43, 0x04, 0x6b, 0x35, 0xc9, 0xf1,
+0x60, 0x23, 0xa5, 0xc8, 0xf3, 0x45, 0x08, 0x92, 0x87, 0x6d, 0x58, 0x32, 0xe6, 0x2f, 0xbd,
+0xf8, 0x72, 0x66, 0x4e, 0x1e, 0xbe, 0xfe, 0x7e, 0x7e, 0x7e, 0x5f, 0x1d, 0x99, 0x91, 0xa0,
+0xa3, 0xc4, 0x0a, 0x77, 0x4d, 0x18, 0x93, 0xa4, 0xab, 0xd4, 0x0b, 0x75, 0x49, 0x10, 0xa2,
+0xc6, 0xef, 0x3d, 0xf8, 0x53, 0x24, 0xab, 0xb5, 0xe8, 0x33, 0xe4, 0x4a, 0x16, 0xae, 0xde,
+0x1f, 0xbc, 0xdb, 0x15, 0xa8, 0xb3, 0xc5, 0x08, 0x73, 0x45, 0xe9, 0x31, 0xc1, 0xe1, 0x21,
+0xa1, 0xa1, 0xa1, 0xc0, 0x02, 0x86, 0x6f, 0x5c, 0x3a, 0xd7, 0x0d, 0x98, 0x93, 0xa4, 0xca,
+0x16, 0xae, 0xde, 0x1f, 0x9d, 0x99, 0xb0, 0xe2, 0x46, 0xef, 0x3d, 0xf8, 0x72, 0x47, 0x0c,
+0x9a, 0xb6, 0xcf, 0xfd, 0x59, 0x11, 0xa0, 0xa3, 0xa5, 0xc8, 0xf3, 0x45, 0x08, 0x92, 0x87,
+0x6d, 0x39, 0xf0, 0x43, 0x04, 0x8a, 0x96, 0xae, 0xde, 0x3e, 0xdf, 0x1d, 0x99, 0x91, 0xa0,
+0xc2, 0x06, 0x6f, 0x3d, 0xf8, 0x72, 0x47, 0x0c, 0x9a, 0x97, 0x8d, 0x98, 0x93, 0x85, 0x88,
+0x73, 0x45, 0xe9, 0x31, 0xe0, 0x23, 0xa5, 0xa9, 0xd0, 0x03, 0x84, 0x8a, 0x96, 0xae, 0xde,
+0x1f, 0xbc, 0xdb, 0x15, 0xa8, 0xd2, 0x26, 0xce, 0xff, 0x5d, 0x19, 0x91, 0x81, 0x80, 0x82,
+0x67, 0x2d, 0xd8, 0x13, 0xa4, 0xab, 0xd4, 0x0b, 0x94, 0xaa, 0xb7, 0xcd, 0xf9, 0x51, 0x20,
+0xa3, 0xa5, 0xc8, 0xf3, 0x45, 0xe9, 0x50, 0x22, 0xc6, 0xef, 0x5c, 0x3a, 0xd7, 0x0d, 0x98,
+0x93, 0x85, 0x88, 0x73, 0x64, 0x4a, 0xf7, 0x4d, 0xf9, 0x51, 0x20, 0xa3, 0xc4, 0x0a, 0x96,
+0xae, 0xde, 0x3e, 0xfe, 0x7e, 0x7e, 0x7e, 0x5f, 0x3c, 0xfa, 0x76, 0x4f, 0xfd, 0x78, 0x72,
+0x66, 0x2f, 0xbd, 0xd9, 0x30, 0xc3, 0xe5, 0x48, 0x12, 0x87, 0x8c, 0x7b, 0x55, 0x28, 0xd2,
+0x07, 0x8c, 0x9a, 0x97, 0xac, 0xda, 0x17, 0x8d, 0x79, 0x51, 0x20, 0xa3, 0xc4, 0xeb, 0x54,
+0x0b, 0x94, 0x8b, 0x94, 0xaa, 0xd6, 0x2e, 0xbf, 0xfc, 0x5b, 0x15, 0xa8, 0xd2, 0x26, 0xaf,
+0xdc, 0x1b, 0xb4, 0xea, 0x37, 0xec, 0x3b, 0xf4, 0x6a, 0x37, 0xcd, 0x18, 0x93, 0x85, 0x69,
+0x31, 0xc1, 0xe1, 0x40, 0xe3, 0x25, 0xc8, 0x12, 0x87, 0x8c, 0x9a, 0xb6, 0xcf, 0xfd, 0x59,
+0x11, 0xa0, 0xc2, 0x06, 0x8e, 0x7f, 0x5d, 0x38, 0xf2, 0x47, 0x0c, 0x7b, 0x74, 0x6a, 0x37,
+0xec, 0x5a, 0x36, 0xee, 0x3f, 0xfc, 0x7a, 0x76, 0x4f, 0x1c, 0x9b, 0x95, 0x89, 0x71, 0x41,
+0x00, 0x63, 0x44, 0xeb, 0x54, 0x2a, 0xd6, 0x0f, 0x9c, 0xba, 0xd7, 0x0d, 0x98, 0x93, 0x85,
+0x69, 0x31, 0xc1, 0x00, 0x82, 0x86, 0x8e, 0x9e, 0xbe, 0xdf, 0x3c, 0xfa, 0x57, 0x2c, 0xda,
+0x36, 0xee, 0x3f, 0xfc, 0x5b, 0x15, 0x89, 0x71, 0x41, 0x00, 0x82, 0x86, 0x8e, 0x7f, 0x5d,
+0x38, 0xf2, 0x47, 0xed, 0x58, 0x13, 0xa4, 0xca, 0xf7, 0x4d, 0xf9, 0x51, 0x01, 0x80, 0x63,
+0x44, 0xeb, 0x54, 0x2a, 0xd6, 0x2e, 0xbf, 0xdd, 0x19, 0x91, 0xa0, 0xa3, 0xa5, 0xa9, 0xb1,
+0xe0, 0x42, 0x06, 0x8e, 0x7f, 0x5d, 0x19, 0x91, 0xa0, 0xa3, 0xc4, 0x0a, 0x96, 0x8f, 0x7d,
+0x78, 0x72, 0x47, 0x0c, 0x7b, 0x74, 0x6a, 0x56, 0x2e, 0xde, 0x1f, 0xbc, 0xfa, 0x57, 0x0d,
+0x79, 0x51, 0x01, 0x61, 0x21, 0xa1, 0xc0, 0xe3, 0x25, 0xa9, 0xb1, 0xc1, 0xe1, 0x40, 0x02,
+0x67, 0x4c, 0x1a, 0x97, 0x8d, 0x98, 0x93, 0xa4, 0xab, 0xd4, 0x2a, 0xd6, 0x0f, 0x9c, 0x9b,
+0xb4, 0xcb, 0x14, 0xaa, 0xb7, 0xcd, 0xf9, 0x51, 0x20, 0xa3, 0xc4, 0xeb, 0x35, 0xc9, 0xf1,
+0x60, 0x42, 0x06, 0x8e, 0x7f, 0x7c, 0x7a, 0x76, 0x6e, 0x3f, 0xfc, 0x7a, 0x76, 0x6e, 0x5e,
+0x3e, 0xfe, 0x7e, 0x5f, 0x3c, 0xdb, 0x15, 0x89, 0x71, 0x41, 0xe1, 0x21, 0xc0, 0xe3, 0x44,
+0xeb, 0x54, 0x2a, 0xb7, 0xcd, 0xf9, 0x70, 0x62, 0x27, 0xad, 0xd8, 0x32, 0xc7, 0x0c, 0x7b,
+0x74, 0x4b, 0x14, 0xaa, 0xb7, 0xec, 0x3b, 0xd5, 0x28, 0xd2, 0x07, 0x6d, 0x39, 0xd1, 0x20,
+0xc2, 0xe7, 0x4c, 0x1a, 0x97, 0x8d, 0x98, 0xb2, 0xc7, 0x0c, 0x59, 0x28, 0xf3, 0x9b };
+// clang-format off
diff --git a/keyboards/ploopyco/trackball/config.h b/keyboards/ploopyco/trackball/config.h
new file mode 100644
index 000000000..57113d965
--- /dev/null
+++ b/keyboards/ploopyco/trackball/config.h
@@ -0,0 +1,69 @@
+/* Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <drashna@live.com>
+ * Copyright 2019 Sunjun Kim
+ * Copyright 2020 Ploopy Corporation
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+#include "config_common.h"
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x5043
+#define PRODUCT_ID 0x5442
+#define DEVICE_VER   0x0001
+#define MANUFACTURER Ploopyco
+#define PRODUCT      Trackball
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 5
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define DIRECT_PINS { { D4, D2, E6, B5, D7 } }
+// These pins are not broken out, and cannot be used normally.
+// They are set as output and pulled high, by default
+#define UNUSED_PINS { D1, D3, B4, B6, B7, D6, C7, F6, F5, F3 }
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+/* Much more so than a keyboard, speed matters for a mouse. So we'll go for as high
+   a polling rate as possible. */
+#define USB_POLLING_INTERVAL_MS 1
+/* Bootmagic Lite key configuration */
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 3
diff --git a/keyboards/ploopyco/trackball/info.json b/keyboards/ploopyco/trackball/info.json
new file mode 100644
index 000000000..84d512d8d
--- /dev/null
+++ b/keyboards/ploopyco/trackball/info.json
@@ -0,0 +1,18 @@
+{
+    "keyboard_name": "PloopyCo Trackball",
+    "url": "",
+    "maintainer": "drashna",
+    "width": 8,
+    "height": 3,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"x":0, "y":0, "h":2},
+                {"x":1, "y":0.25, "h":1.5},
+                {"x":2, "y":0, "h":2},
+                {"x":3.5, "y":0, "h":2},
+                {"x":4.5, "y":0, "h":2}
+            ]
+        }
+    }
+}
diff --git a/keyboards/ploopyco/trackball/keymaps/default/keymap.c b/keyboards/ploopyco/trackball/keymaps/default/keymap.c
new file mode 100644
index 000000000..dc1ad1439
--- /dev/null
+++ b/keyboards/ploopyco/trackball/keymaps/default/keymap.c
@@ -0,0 +1,26 @@
+/* Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <drashna@live.com>
+ * Copyright 2019 Sunjun Kim
+ * Copyright 2020 Ploopy Corporation
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT( /* Base */
+        KC_BTN1, KC_BTN3, KC_BTN2,
+          KC_BTN4, KC_BTN5
+    ),
+};
diff --git a/keyboards/ploopyco/trackball/keymaps/default/readme.md b/keyboards/ploopyco/trackball/keymaps/default/readme.md
new file mode 100644
index 000000000..f965ef3c3
--- /dev/null
+++ b/keyboards/ploopyco/trackball/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for Ploopyco Trackball
diff --git a/keyboards/ploopyco/trackball/keymaps/via/keymap.c b/keyboards/ploopyco/trackball/keymaps/via/keymap.c
new file mode 100644
index 000000000..dc1ad1439
--- /dev/null
+++ b/keyboards/ploopyco/trackball/keymaps/via/keymap.c
@@ -0,0 +1,26 @@
+/* Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <drashna@live.com>
+ * Copyright 2019 Sunjun Kim
+ * Copyright 2020 Ploopy Corporation
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT( /* Base */
+        KC_BTN1, KC_BTN3, KC_BTN2,
+          KC_BTN4, KC_BTN5
+    ),
+};
diff --git a/keyboards/ploopyco/trackball/keymaps/via/rules.mk b/keyboards/ploopyco/trackball/keymaps/via/rules.mk
new file mode 100644
index 000000000..1e5b99807
--- /dev/null
+++ b/keyboards/ploopyco/trackball/keymaps/via/rules.mk
@@ -0,0 +1 @@
+VIA_ENABLE = yes
diff --git a/keyboards/ploopyco/trackball/readme.md b/keyboards/ploopyco/trackball/readme.md
new file mode 100644
index 000000000..76b9d6a76
--- /dev/null
+++ b/keyboards/ploopyco/trackball/readme.md
@@ -0,0 +1,68 @@
+# Ploopyco Trackball
+![Ploopyco Trackball](https://i.redd.it/j7z0y83txps31.jpg)
+It's a DIY, QMK Powered Trackball!!!!
+Everything works. However the scroll wheel has some issues and acts very odd.
+* Keyboard Maintainer: [PloopyCo](https://github.com/ploopyco), [Drashna Jael're](https://github.com/drashna/), [Germ](https://github.com/germ/)
+* Hardware Supported: ATMega32u4 8MHz(3.3v)  
+* Hardware Availability: [Store](https://ploopy.co), [GitHub](https://github.com/ploopyco)
+Make example for this keyboard (after setting up your build environment):
+    make ploopyco/trackball:default:flash
+    
+To jump to the bootloader, hold down "Button 4" (immediate right of the trackball) 
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+# Customzing your PloopyCo Trackball
+While the defaults are designed so that it can be plugged in and used right away, there are a number of things that you may want to change.  Such as adding DPI control, or to use the ball to scroll while holding a button.   To allow for this sort of control, there is a callback for both the scroll wheel and the mouse censor. 
+The default behavior for this is:
+```c
+void process_wheel_user(report_mouse_t* mouse_report, int16_t h, int16_t v) {
+    mouse_report->h = h;
+    mouse_report->v = v;
+}
+void process_mouse_user(report_mouse_t* mouse_report, int16_t x, int16_t y) {
+    mouse_report->x = x;
+    mouse_report->y = y;
+}
+```
+This should allow you to more heavily customize the behavior. 
+Alternatively, the `process_wheel` and `process_mouse` functions can both be replaced too, to allow for even more functionality.
+Additionally, you can change the DPI/CPI or speed of the trackball by calling `pmw_set_cpi` at any time. And tThe default can be changed by adding a define to the keymap's `config.h` file:
+    #define PMW_CPI 1600
+# Programming QMK-DFU onto the PloopyCo Trackball
+If you would rather have DFU on this board, you can use the QMK-DFU bootloader on the device.  To do so, you want to run: 
+    make ploopyco/trackball:default:production
+Once you have that, you'll need to [ISP Flash](https://docs.qmk.fm/#/isp_flashing_guide) the chip with the new bootloader hex file created (or the production hex), and set the fuses:
+| Fuse     | Setting          |
+|----------|------------------|
+| Low      | `0xDF`           |
+| High     | `0xD8` or `0x98` |
+| Extended | `0xCB`           |
+Original (Caterina) settings: 
+| Fuse     | Setting          |
+|----------|------------------|
+| Low      | `0xFF`           |
+| High     | `0xD8`           |
+| Extended | `0xFE`           |
diff --git a/keyboards/ploopyco/trackball/rules.mk b/keyboards/ploopyco/trackball/rules.mk
new file mode 100644
index 000000000..d77431b67
--- /dev/null
+++ b/keyboards/ploopyco/trackball/rules.mk
@@ -0,0 +1,30 @@
+# MCU name
+MCU = atmega32u4
+# Processor frequency
+F_CPU = 8000000
+# Bootloader selection
+BOOTLOADER = caterina
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes         # Console for debug
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+POINTING_DEVICE_ENABLE = yes
+MOUSEKEY_ENABLE = no        # Mouse keys
+QUANTUM_LIB_SRC += analog.c spi_master.c
+SRC += pmw3600.c opt_encoder.c
diff --git a/keyboards/ploopyco/trackball/trackball.c b/keyboards/ploopyco/trackball/trackball.c
new file mode 100644
index 000000000..6a9bffbff
--- /dev/null
+++ b/keyboards/ploopyco/trackball/trackball.c
@@ -0,0 +1,237 @@
+/* Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <drashna@live.com>
+ * Copyright 2019 Sunjun Kim
+ * Copyright 2020 Ploopy Corporation
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+#ifndef OPT_DEBOUNCE
+#    define OPT_DEBOUNCE 5  // (ms)                     Time between scroll events
+#endif
+#ifndef SCROLL_BUTT_DEBOUNCE
+#    define SCROLL_BUTT_DEBOUNCE 100  // (ms)                   Time between scroll events
+#endif
+#ifndef OPT_THRES
+#    define OPT_THRES 150  // (0-1024)  Threshold for actication
+#endif
+#ifndef OPT_SCALE
+#    define OPT_SCALE 1  // Multiplier for wheel
+#endif
+// TODO: Implement libinput profiles
+// https://wayland.freedesktop.org/libinput/doc/latest/pointer-acceleration.html
+// Compile time accel selection
+// Valid options are ACC_NONE, ACC_LINEAR, ACC_CUSTOM, ACC_QUADRATIC
+// Trackball State
+bool     is_scroll_clicked = false;
+bool     BurstState        = false;  // init burst state for Trackball module
+uint16_t MotionStart       = 0;      // Timer for accel, 0 is resting state
+uint16_t lastScroll        = 0;      // Previous confirmed wheel event
+uint16_t lastMidClick      = 0;      // Stops scrollwheel from being read if it was pressed
+uint8_t  OptLowPin         = OPT_ENC1;
+bool     debug_encoder     = false;
+__attribute__((weak)) void process_wheel_user(report_mouse_t* mouse_report, int16_t h, int16_t v) {
+    mouse_report->h = h;
+    mouse_report->v = v;
+}
+__attribute__((weak)) void process_wheel(report_mouse_t* mouse_report) {
+    // TODO: Replace this with interrupt driven code,  polling is S L O W
+    // Lovingly ripped from the Ploopy Source
+    // If the mouse wheel was just released, do not scroll.
+    if (timer_elapsed(lastMidClick) < SCROLL_BUTT_DEBOUNCE) {
+        return;
+    }
+    // Limit the number of scrolls per unit time.
+    if (timer_elapsed(lastScroll) < OPT_DEBOUNCE) {
+        return;
+    }
+    // Don't scroll if the middle button is depressed.
+    if (is_scroll_clicked) {
+#ifndef IGNORE_SCROLL_CLICK
+        return;
+#endif
+    }
+    lastScroll  = timer_read();
+    uint16_t p1 = adc_read(OPT_ENC1_MUX);
+    uint16_t p2 = adc_read(OPT_ENC2_MUX);
+    if (debug_encoder) dprintf("OPT1: %d, OPT2: %d\n", p1, p2);
+    uint8_t dir = opt_encoder_handler(p1, p2);
+    if (dir == 0) return;
+    process_wheel_user(mouse_report, mouse_report->h, (int)(mouse_report->v + (dir * OPT_SCALE)));
+}
+__attribute__((weak)) void process_mouse_user(report_mouse_t* mouse_report, int16_t x, int16_t y) {
+    mouse_report->x = x;
+    mouse_report->y = y;
+}
+__attribute__((weak)) void process_mouse(report_mouse_t* mouse_report) {
+    report_pmw_t data = pmw_read_burst();
+    if (data.isOnSurface && data.isMotion) {
+        // Reset timer if stopped moving
+        if (!data.isMotion) {
+            if (MotionStart != 0) MotionStart = 0;
+            return;
+        }
+        // Set timer if new motion
+        if ((MotionStart == 0) && data.isMotion) {
+            if (debug_mouse) dprintf("Starting motion.\n");
+            MotionStart = timer_read();
+        }
+        if (debug_mouse) {
+            dprintf("Delt] d: %d t: %u\n", abs(data.dx) + abs(data.dy), MotionStart);
+        }
+        if (debug_mouse) {
+            dprintf("Pre ] X: %d, Y: %d\n", data.dx, data.dy);
+        }
+#if defined(PROFILE_LINEAR)
+        float scale = float(timer_elaspsed(MotionStart)) / 1000.0;
+        data.dx *= scale;
+        data.dy *= scale;
+#elif defined(PROFILE_INVERSE)
+        // TODO
+#else
+        // no post processing
+#endif
+        // apply multiplier
+        // data.dx *= mouse_multiplier;
+        // data.dy *= mouse_multiplier;
+        // Wrap to HID size
+        data.dx = constrain(data.dx, -127, 127);
+        data.dy = constrain(data.dy, -127, 127);
+        if (debug_mouse) dprintf("Cons] X: %d, Y: %d\n", data.dx, data.dy);
+        // dprintf("Elapsed:%u, X: %f Y: %\n", i, pgm_read_byte(firmware_data+i));
+        process_mouse_user(mouse_report, data.dx, data.dy);
+    }
+}
+bool process_record_kb(uint16_t keycode, keyrecord_t* record) {
+    if (debug_mouse) {
+        dprintf("KL: kc: %u, col: %u, row: %u, pressed: %u\n", keycode, record->event.key.col, record->event.key.row, record->event.pressed);
+    }
+    // Update Timer to prevent accidental scrolls
+    if ((record->event.key.col == 2) && (record->event.key.row == 0)) {
+        lastMidClick = timer_read();
+        is_scroll_clicked = record->event.pressed;
+    }
+/* If Mousekeys is disabled, then use handle the mouse button
+ * keycodes.  This makes things simpler, and allows usage of
+ * the keycodes in a consistent manner.  But only do this if
+ * Mousekeys is not enable, so it's not handled twice.
+ */
+#ifndef MOUSEKEY_ENABLE
+    if (IS_MOUSEKEY_BUTTON(keycode)) {
+        report_mouse_t currentReport = pointing_device_get_report();
+        if (record->event.pressed) {
+            if (keycode == KC_MS_BTN1)
+                currentReport.buttons |= MOUSE_BTN1;
+            else if (keycode == KC_MS_BTN2)
+                currentReport.buttons |= MOUSE_BTN2;
+            else if (keycode == KC_MS_BTN3)
+                currentReport.buttons |= MOUSE_BTN3;
+            else if (keycode == KC_MS_BTN4)
+                currentReport.buttons |= MOUSE_BTN4;
+            else if (keycode == KC_MS_BTN5)
+                currentReport.buttons |= MOUSE_BTN5;
+        } else {
+            if (keycode == KC_MS_BTN1)
+                currentReport.buttons &= ~MOUSE_BTN1;
+            else if (keycode == KC_MS_BTN2)
+                currentReport.buttons &= ~MOUSE_BTN2;
+            else if (keycode == KC_MS_BTN3)
+                currentReport.buttons &= ~MOUSE_BTN3;
+            else if (keycode == KC_MS_BTN4)
+                currentReport.buttons &= ~MOUSE_BTN4;
+            else if (keycode == KC_MS_BTN5)
+                currentReport.buttons &= ~MOUSE_BTN5;
+        }
+        pointing_device_set_report(currentReport);
+    }
+#endif
+    return process_record_user(keycode, record);
+}
+// Hardware Setup
+void keyboard_pre_init_kb(void) {
+    // debug_enable  = true;
+    // debug_matrix  = true;
+    // debug_mouse   = true;
+    // debug_encoder = true;
+    setPinInput(OPT_ENC1);
+    setPinInput(OPT_ENC2);
+    // This is the debug LED.
+    setPinOutput(F7);
+    writePin(F7, debug_enable);
+    /* Ground all output pins connected to ground. This provides additional
+     * pathways to ground. If you're messing with this, know this: driving ANY
+     * of these pins high will cause a short. On the MCU. Ka-blooey.
+     */
+#ifdef UNUSED_PINS
+    const pin_t unused_pins[] = UNUSED_PINS;
+    for (uint8_t i = 0; i < (sizeof(unused_pins) / sizeof(pin_t)); i++) {
+        setPinOutput(unused_pins[i]);
+        writePinLow(unused_pins[i]);
+    }
+#endif
+    keyboard_pre_init_user();
+}
+void pointing_device_init(void) {
+    // initialize ball sensor
+    pmw_spi_init();
+    // initialize the scroll wheel's optical encoder
+    opt_encoder_init();
+}
+bool has_report_changed (report_mouse_t first, report_mouse_t second) {
+    return !(
+        (!first.buttons && first.buttons == second.buttons) &&
+        (!first.x && first.x == second.x) &&
+        (!first.y && first.y == second.y) &&
+        (!first.h && first.h == second.h) &&
+        (!first.v && first.v == second.v) );
+}
+void pointing_device_task(void) {
+    report_mouse_t mouse_report = pointing_device_get_report();
+    process_wheel(&mouse_report);
+    process_mouse(&mouse_report);
+    pointing_device_set_report(mouse_report);
+    if (has_report_changed(mouse_report, pointing_device_get_report())) {
+        pointing_device_send();
+    }
+}
diff --git a/keyboards/ploopyco/trackball/trackball.h b/keyboards/ploopyco/trackball/trackball.h
new file mode 100644
index 000000000..959305a07
--- /dev/null
+++ b/keyboards/ploopyco/trackball/trackball.h
@@ -0,0 +1,40 @@
+/* Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <drashna@live.com>
+ * Copyright 2019 Sunjun Kim
+ * Copyright 2020 Ploopy Corporation
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+#include "quantum.h"
+#include "spi_master.h"
+#include "pmw3600.h"
+#include "analog.h"
+#include "opt_encoder.h"
+#include "pointing_device.h"
+// Sensor defs
+#define OPT_ENC1 F0
+#define OPT_ENC2 F4
+#define OPT_ENC1_MUX 0
+#define OPT_ENC2_MUX 4
+void process_mouse(report_mouse_t* mouse_report);
+void process_mouse_user(report_mouse_t* mouse_report, int16_t x, int16_t y);
+void process_wheel(report_mouse_t* mouse_report);
+void process_wheel_user(report_mouse_t* mouse_report, int16_t h, int16_t v);
+#define LAYOUT(BL, BM, BR, BF, BB) \
+    { {BL, BM, BR, BF, BB}, }