aboutsummaryrefslogtreecommitdiff
path: root/keyboards/xiaomi
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/xiaomi')
-rw-r--r--keyboards/xiaomi/mk02/README.md104
-rw-r--r--keyboards/xiaomi/mk02/chconf.h524
-rw-r--r--keyboards/xiaomi/mk02/config.h60
-rw-r--r--keyboards/xiaomi/mk02/halconf.h354
-rw-r--r--keyboards/xiaomi/mk02/keymaps/default/keymap.c27
-rw-r--r--keyboards/xiaomi/mk02/ld/STM32F072_0x2000_bootloader.ld85
-rw-r--r--keyboards/xiaomi/mk02/mcuconf.h176
-rw-r--r--keyboards/xiaomi/mk02/mk02.c8
-rw-r--r--keyboards/xiaomi/mk02/mk02.h20
-rw-r--r--keyboards/xiaomi/mk02/rules.mk17
10 files changed, 1375 insertions, 0 deletions
diff --git a/keyboards/xiaomi/mk02/README.md b/keyboards/xiaomi/mk02/README.md
new file mode 100644
index 000000000..2dea99ff1
--- /dev/null
+++ b/keyboards/xiaomi/mk02/README.md
@@ -0,0 +1,104 @@
1# Xiaomi Yuemi Pro MK02
2
3A tenkeyless keyboard sold under Xiaomi brand. It uses an STM32F072C8T6 microcontroller and can be flashed with QMK.
4
5LED backlight is currently not supported.
6
7* Keyboard Maintainer: [@xyzz](https://github.com/xyzz)
8* Hardware Supported: Xiaomi Yuemi Pro MK02
9* Hardware Availability: Aliexpress
10
11Make example for this keyboard (after setting up your build environment):
12
13 make xiaomi/mk02:default
14
15See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
16
17## Installation
18
19Please understand that following these steps will void your warranty and might irrecoverably damage your keyboard.
20
21### Installing the bootloader
22
23You only need to do this step once (unless you destroy your user bootloader which is not possible so long as you follow these steps correctly).
24
25Unplug the keyboard. Disassemble the keyboard and look at the area around the MCU. Make sure your keyboard looks the same as in the picture and that the chip says STM32F072C8T6 on it:
26
27![mcu](https://i.imgur.com/HM8tUWU.jpg)
28
29Using a piece of wire, connect TP28 (indicated in red) and 3v3 (square pad indicated in green) together with tweezers or a piece of wire. Make sure to not touch the case with your wire when shorting!!! Don't push it all the way through the hole.
30
31Plug the keyboard in with the wire connected. You should see the following device appear:
32```
33[5067851.560317] usb 2-1.5.3.1: new full-speed USB device number 6 using ehci-pci
34[5067851.670006] usb 2-1.5.3.1: New USB device found, idVendor=0483, idProduct=df11, bcdDevice=22.00
35[5067851.670010] usb 2-1.5.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
36[5067851.670013] usb 2-1.5.3.1: Product: STM32 BOOTLOADER
37[5067851.670015] usb 2-1.5.3.1: Manufacturer: STMicroelectronics
38[5067851.670017] usb 2-1.5.3.1: SerialNumber: FFFFFFFEFFFF
39```
40
41If you don't see this, you did something wrong. Disconnect the keyboard and try again.
42
43If you do see this, remove the wire before continuing.
44
45Make a backup of internal flash memory in case you'd like to revert to the original firmware in the future:
46```
47dfu-util -d 0483:df11 -a 0 -s 0x08000000 -U flash-backup.bin
48```
49
50Ensure the dumped flash is correct:
51```
52strings flash.bin | grep KB
53```
54(You should see 2 entries of "USB KB")
55
56Finally, flash the bootloader ([jumploader-xiaomi_mk02-padded.bin](https://github.com/xyzz/stm32f072-keyboard-jumploader/releases/download/r1/jumploader-xiaomi_mk02-padded.bin)) with:
57```
58dfu-util -d 0483:df11 -a 0 -s 0x08000000:leave -D jumploader-xiaomi_mk02-padded.bin
59```
60
61At this point the keyboard should reboot into bootloader mode; if it doesn't, wait a couple seconds and replug the USB cable.
62
63### Installing the firmware
64
65To install QMK, first boot into bootloader mode as detailed below. When the keyboard boots in bootloader mode, you should see the following device:
66
67```
68[5067851.560317] usb 2-1.5.3.1: new full-speed USB device number 6 using ehci-pci
69[5067851.670006] usb 2-1.5.3.1: New USB device found, idVendor=0483, idProduct=df11, bcdDevice=22.00
70[5067851.670010] usb 2-1.5.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
71[5067851.670013] usb 2-1.5.3.1: Product: STM32 BOOTLOADER
72[5067851.670015] usb 2-1.5.3.1: Manufacturer: STMicroelectronics
73[5067851.670017] usb 2-1.5.3.1: SerialNumber: FFFFFFFEFFFF
74```
75
76Flash the keyboard normally by executing:
77
78```
79make xiaomi/mk02:default:flash
80```
81
82Warning! If you flash the firmware manually by using `dfu-util`, make sure to use the following arguments:
83
84```
85-d 0483:df11 -a 0 -s 0x08002000:leave
86```
87
88If you don't, you'll blow away the user bootloader and will have to repeat the installation steps.
89
90## Booting into bootloader
91
92To boot into bootloader, do either of the following:
93- map a RESET key in your keymap and tap it, or
94- hold spacebar while plugging in the keyboard.
95
96If neither of these work, you must have blown away the user bootloader somehow and will need to repeat the installation guide from the first step.
97
98## Restoring the original firmware
99
100If you wish to restore the original firmware, boot into the bootloader and then execute:
101
102```
103dfu-util -d 0483:df11 -a 0 -s 0x08000000:leave -D flash-backup.bin
104```
diff --git a/keyboards/xiaomi/mk02/chconf.h b/keyboards/xiaomi/mk02/chconf.h
new file mode 100644
index 000000000..99fa8ce39
--- /dev/null
+++ b/keyboards/xiaomi/mk02/chconf.h
@@ -0,0 +1,524 @@
1/*
2 ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
3
4 Licensed under the Apache License, Version 2.0 (the "License");
5 you may not use this file except in compliance with the License.
6 You may obtain a copy of the License at
7
8 http://www.apache.org/licenses/LICENSE-2.0
9
10 Unless required by applicable law or agreed to in writing, software
11 distributed under the License is distributed on an "AS IS" BASIS,
12 WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 See the License for the specific language governing permissions and
14 limitations under the License.
15*/
16
17/**
18 * @file templates/chconf.h
19 * @brief Configuration file template.
20 * @details A copy of this file must be placed in each project directory, it
21 * contains the application specific kernel settings.
22 *
23 * @addtogroup config
24 * @details Kernel related settings and hooks.
25 * @{
26 */
27
28#ifndef CHCONF_H
29#define CHCONF_H
30
31#define _CHIBIOS_RT_CONF_
32
33/*===========================================================================*/
34/**
35 * @name System timers settings
36 * @{
37 */
38/*===========================================================================*/
39
40/**
41 * @brief System time counter resolution.
42 * @note Allowed values are 16 or 32 bits.
43 */
44#define CH_CFG_ST_RESOLUTION 32
45
46/**
47 * @brief System tick frequency.
48 * @details Frequency of the system timer that drives the system ticks. This
49 * setting also defines the system tick time unit.
50 */
51#define CH_CFG_ST_FREQUENCY 10000
52
53/**
54 * @brief Time delta constant for the tick-less mode.
55 * @note If this value is zero then the system uses the classic
56 * periodic tick. This value represents the minimum number
57 * of ticks that is safe to specify in a timeout directive.
58 * The value one is not valid, timeouts are rounded up to
59 * this value.
60 */
61#define CH_CFG_ST_TIMEDELTA 2
62
63/** @} */
64
65/*===========================================================================*/
66/**
67 * @name Kernel parameters and options
68 * @{
69 */
70/*===========================================================================*/
71
72/**
73 * @brief Round robin interval.
74 * @details This constant is the number of system ticks allowed for the
75 * threads before preemption occurs. Setting this value to zero
76 * disables the preemption for threads with equal priority and the
77 * round robin becomes cooperative. Note that higher priority
78 * threads can still preempt, the kernel is always preemptive.
79 * @note Disabling the round robin preemption makes the kernel more compact
80 * and generally faster.
81 * @note The round robin preemption is not supported in tickless mode and
82 * must be set to zero in that case.
83 */
84#define CH_CFG_TIME_QUANTUM 0
85
86/**
87 * @brief Managed RAM size.
88 * @details Size of the RAM area to be managed by the OS. If set to zero
89 * then the whole available RAM is used. The core memory is made
90 * available to the heap allocator and/or can be used directly through
91 * the simplified core memory allocator.
92 *
93 * @note In order to let the OS manage the whole RAM the linker script must
94 * provide the @p __heap_base__ and @p __heap_end__ symbols.
95 * @note Requires @p CH_CFG_USE_MEMCORE.
96 */
97#define CH_CFG_MEMCORE_SIZE 0
98
99/**
100 * @brief Idle thread automatic spawn suppression.
101 * @details When this option is activated the function @p chSysInit()
102 * does not spawn the idle thread. The application @p main()
103 * function becomes the idle thread and must implement an
104 * infinite loop.
105 */
106#define CH_CFG_NO_IDLE_THREAD FALSE
107
108/* Use __WFI in the idle thread for waiting. Does lower the power
109 * consumption. */
110#define CORTEX_ENABLE_WFI_IDLE TRUE
111
112/** @} */
113
114/*===========================================================================*/
115/**
116 * @name Performance options
117 * @{
118 */
119/*===========================================================================*/
120
121/**
122 * @brief OS optimization.
123 * @details If enabled then time efficient rather than space efficient code
124 * is used when two possible implementations exist.
125 *
126 * @note This is not related to the compiler optimization options.
127 * @note The default is @p TRUE.
128 */
129#define CH_CFG_OPTIMIZE_SPEED FALSE
130
131/** @} */
132
133/*===========================================================================*/
134/**
135 * @name Subsystem options
136 * @{
137 */
138/*===========================================================================*/
139
140/**
141 * @brief Time Measurement APIs.
142 * @details If enabled then the time measurement APIs are included in
143 * the kernel.
144 *
145 * @note The default is @p TRUE.
146 */
147#define CH_CFG_USE_TM FALSE
148
149/**
150 * @brief Threads registry APIs.
151 * @details If enabled then the registry APIs are included in the kernel.
152 *
153 * @note The default is @p TRUE.
154 */
155#define CH_CFG_USE_REGISTRY TRUE
156
157/**
158 * @brief Threads synchronization APIs.
159 * @details If enabled then the @p chThdWait() function is included in
160 * the kernel.
161 *
162 * @note The default is @p TRUE.
163 */
164#define CH_CFG_USE_WAITEXIT TRUE
165
166/**
167 * @brief Semaphores APIs.
168 * @details If enabled then the Semaphores APIs are included in the kernel.
169 *
170 * @note The default is @p TRUE.
171 */
172#define CH_CFG_USE_SEMAPHORES TRUE
173
174/**
175 * @brief Semaphores queuing mode.
176 * @details If enabled then the threads are enqueued on semaphores by
177 * priority rather than in FIFO order.
178 *
179 * @note The default is @p FALSE. Enable this if you have special
180 * requirements.
181 * @note Requires @p CH_CFG_USE_SEMAPHORES.
182 */
183#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
184
185/**
186 * @brief Mutexes APIs.
187 * @details If enabled then the mutexes APIs are included in the kernel.
188 *
189 * @note The default is @p TRUE.
190 */
191#define CH_CFG_USE_MUTEXES TRUE
192
193/**
194 * @brief Enables recursive behavior on mutexes.
195 * @note Recursive mutexes are heavier and have an increased
196 * memory footprint.
197 *
198 * @note The default is @p FALSE.
199 * @note Requires @p CH_CFG_USE_MUTEXES.
200 */
201#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
202
203/**
204 * @brief Conditional Variables APIs.
205 * @details If enabled then the conditional variables APIs are included
206 * in the kernel.
207 *
208 * @note The default is @p TRUE.
209 * @note Requires @p CH_CFG_USE_MUTEXES.
210 */
211#define CH_CFG_USE_CONDVARS TRUE
212
213/**
214 * @brief Conditional Variables APIs with timeout.
215 * @details If enabled then the conditional variables APIs with timeout
216 * specification are included in the kernel.
217 *
218 * @note The default is @p TRUE.
219 * @note Requires @p CH_CFG_USE_CONDVARS.
220 */
221#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE
222
223/**
224 * @brief Events Flags APIs.
225 * @details If enabled then the event flags APIs are included in the kernel.
226 *
227 * @note The default is @p TRUE.
228 */
229#define CH_CFG_USE_EVENTS TRUE
230
231/**
232 * @brief Events Flags APIs with timeout.
233 * @details If enabled then the events APIs with timeout specification
234 * are included in the kernel.
235 *
236 * @note The default is @p TRUE.
237 * @note Requires @p CH_CFG_USE_EVENTS.
238 */
239#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
240
241/**
242 * @brief Synchronous Messages APIs.
243 * @details If enabled then the synchronous messages APIs are included
244 * in the kernel.
245 *
246 * @note The default is @p TRUE.
247 */
248#define CH_CFG_USE_MESSAGES TRUE
249
250/**
251 * @brief Synchronous Messages queuing mode.
252 * @details If enabled then messages are served by priority rather than in
253 * FIFO order.
254 *
255 * @note The default is @p FALSE. Enable this if you have special
256 * requirements.
257 * @note Requires @p CH_CFG_USE_MESSAGES.
258 */
259#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
260
261/**
262 * @brief Mailboxes APIs.
263 * @details If enabled then the asynchronous messages (mailboxes) APIs are
264 * included in the kernel.
265 *
266 * @note The default is @p TRUE.
267 * @note Requires @p CH_CFG_USE_SEMAPHORES.
268 */
269#define CH_CFG_USE_MAILBOXES TRUE
270
271/**
272 * @brief Core Memory Manager APIs.
273 * @details If enabled then the core memory manager APIs are included
274 * in the kernel.
275 *
276 * @note The default is @p TRUE.
277 */
278#define CH_CFG_USE_MEMCORE FALSE
279
280/**
281 * @brief Heap Allocator APIs.
282 * @details If enabled then the memory heap allocator APIs are included
283 * in the kernel.
284 *
285 * @note The default is @p TRUE.
286 * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
287 * @p CH_CFG_USE_SEMAPHORES.
288 * @note Mutexes are recommended.
289 */
290#define CH_CFG_USE_HEAP FALSE
291
292/**
293 * @brief Memory Pools Allocator APIs.
294 * @details If enabled then the memory pools allocator APIs are included
295 * in the kernel.
296 *
297 * @note The default is @p TRUE.
298 */
299#define CH_CFG_USE_MEMPOOLS FALSE
300
301/**
302 * @brief Dynamic Threads APIs.
303 * @details If enabled then the dynamic threads creation APIs are included
304 * in the kernel.
305 *
306 * @note The default is @p TRUE.
307 * @note Requires @p CH_CFG_USE_WAITEXIT.
308 * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
309 */
310#define CH_CFG_USE_DYNAMIC FALSE
311
312/** @} */
313
314/*===========================================================================*/
315/**
316 * @name Debug options
317 * @{
318 */
319/*===========================================================================*/
320
321/**
322 * @brief Debug option, kernel statistics.
323 *
324 * @note The default is @p FALSE.
325 */
326#define CH_DBG_STATISTICS FALSE
327
328/**
329 * @brief Debug option, system state check.
330 * @details If enabled the correct call protocol for system APIs is checked
331 * at runtime.
332 *
333 * @note The default is @p FALSE.
334 */
335#define CH_DBG_SYSTEM_STATE_CHECK FALSE
336
337/**
338 * @brief Debug option, parameters checks.
339 * @details If enabled then the checks on the API functions input
340 * parameters are activated.
341 *
342 * @note The default is @p FALSE.
343 */
344#define CH_DBG_ENABLE_CHECKS FALSE
345
346/**
347 * @brief Debug option, consistency checks.
348 * @details If enabled then all the assertions in the kernel code are
349 * activated. This includes consistency checks inside the kernel,
350 * runtime anomalies and port-defined checks.
351 *
352 * @note The default is @p FALSE.
353 */
354#define CH_DBG_ENABLE_ASSERTS FALSE
355
356/**
357 * @brief Debug option, trace buffer.
358 * @details If enabled then the trace buffer is activated.
359 *
360 * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
361 */
362#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
363
364/**
365 * @brief Trace buffer entries.
366 * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
367 * different from @p CH_DBG_TRACE_MASK_DISABLED.
368 */
369#define CH_DBG_TRACE_BUFFER_SIZE 128
370
371/**
372 * @brief Debug option, stack checks.
373 * @details If enabled then a runtime stack check is performed.
374 *
375 * @note The default is @p FALSE.
376 * @note The stack check is performed in a architecture/port dependent way.
377 * It may not be implemented or some ports.
378 * @note The default failure mode is to halt the system with the global
379 * @p panic_msg variable set to @p NULL.
380 */
381#define CH_DBG_ENABLE_STACK_CHECK FALSE
382
383/**
384 * @brief Debug option, stacks initialization.
385 * @details If enabled then the threads working area is filled with a byte
386 * value when a thread is created. This can be useful for the
387 * runtime measurement of the used stack.
388 *
389 * @note The default is @p FALSE.
390 */
391#define CH_DBG_FILL_THREADS FALSE
392
393/**
394 * @brief Debug option, threads profiling.
395 * @details If enabled then a field is added to the @p thread_t structure that
396 * counts the system ticks occurred while executing the thread.
397 *
398 * @note The default is @p FALSE.
399 * @note This debug option is not currently compatible with the
400 * tickless mode.
401 */
402#define CH_DBG_THREADS_PROFILING FALSE
403
404/** @} */
405
406/*===========================================================================*/
407/**
408 * @name Kernel hooks
409 * @{
410 */
411/*===========================================================================*/
412
413/**
414 * @brief Threads descriptor structure extension.
415 * @details User fields added to the end of the @p thread_t structure.
416 */
417#define CH_CFG_THREAD_EXTRA_FIELDS \
418 /* Add threads custom fields here.*/
419
420/**
421 * @brief Threads initialization hook.
422 * @details User initialization code added to the @p chThdInit() API.
423 *
424 * @note It is invoked from within @p chThdInit() and implicitly from all
425 * the threads creation APIs.
426 */
427#define CH_CFG_THREAD_INIT_HOOK(tp) { \
428 /* Add threads initialization code here.*/ \
429}
430
431/**
432 * @brief Threads finalization hook.
433 * @details User finalization code added to the @p chThdExit() API.
434 */
435#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
436 /* Add threads finalization code here.*/ \
437}
438
439/**
440 * @brief Context switch hook.
441 * @details This hook is invoked just before switching between threads.
442 */
443#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
444 /* Context switch code here.*/ \
445}
446
447/**
448 * @brief ISR enter hook.
449 */
450#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
451 /* IRQ prologue code here.*/ \
452}
453
454/**
455 * @brief ISR exit hook.
456 */
457#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
458 /* IRQ epilogue code here.*/ \
459}
460
461/**
462 * @brief Idle thread enter hook.
463 * @note This hook is invoked within a critical zone, no OS functions
464 * should be invoked from here.
465 * @note This macro can be used to activate a power saving mode.
466 */
467#define CH_CFG_IDLE_ENTER_HOOK() { \
468 /* Idle-enter code here.*/ \
469}
470
471/**
472 * @brief Idle thread leave hook.
473 * @note This hook is invoked within a critical zone, no OS functions
474 * should be invoked from here.
475 * @note This macro can be used to deactivate a power saving mode.
476 */
477#define CH_CFG_IDLE_LEAVE_HOOK() { \
478 /* Idle-leave code here.*/ \
479}
480
481/**
482 * @brief Idle Loop hook.
483 * @details This hook is continuously invoked by the idle thread loop.
484 */
485#define CH_CFG_IDLE_LOOP_HOOK() { \
486 /* Idle loop code here.*/ \
487}
488
489/**
490 * @brief System tick event hook.
491 * @details This hook is invoked in the system tick handler immediately
492 * after processing the virtual timers queue.
493 */
494#define CH_CFG_SYSTEM_TICK_HOOK() { \
495 /* System tick event code here.*/ \
496}
497
498/**
499 * @brief System halt hook.
500 * @details This hook is invoked in case to a system halting error before
501 * the system is halted.
502 */
503#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
504 /* System halt code here.*/ \
505}
506
507/**
508 * @brief Trace hook.
509 * @details This hook is invoked each time a new record is written in the
510 * trace buffer.
511 */
512#define CH_CFG_TRACE_HOOK(tep) { \
513 /* Trace code here.*/ \
514}
515
516/** @} */
517
518/*===========================================================================*/
519/* Port-specific settings (override port settings defaulted in chcore.h). */
520/*===========================================================================*/
521
522#endif /* CHCONF_H */
523
524/** @} */
diff --git a/keyboards/xiaomi/mk02/config.h b/keyboards/xiaomi/mk02/config.h
new file mode 100644
index 000000000..14ce3875b
--- /dev/null
+++ b/keyboards/xiaomi/mk02/config.h
@@ -0,0 +1,60 @@
1/*
2Copyright 2015 Jun Wako <wakojun@gmail.com>
3
4This program is free software: you can redistribute it and/or modify
5it under the terms of the GNU General Public License as published by
6the Free Software Foundation, either version 2 of the License, or
7(at your option) any later version.
8
9This program is distributed in the hope that it will be useful,
10but WITHOUT ANY WARRANTY; without even the implied warranty of
11MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12GNU General Public License for more details.
13
14You should have received a copy of the GNU General Public License
15along with this program. If not, see <http://www.gnu.org/licenses/>.
16*/
17
18#pragma once
19
20/* USB Device descriptor parameter */
21#define VENDOR_ID 0xFEED
22#define PRODUCT_ID 0x0B91
23#define DEVICE_VER 0x0001
24/* in python2: list(u"whatever".encode('utf-16-le')) */
25/* at most 32 characters or the ugly hack in usb_main.c borks */
26#define MANUFACTURER Xiaomi
27#define PRODUCT MK02
28#define DESCRIPTION Yuemi Pro MK02
29
30/* key matrix size */
31#define MATRIX_ROWS 6
32#define MATRIX_COLS 17
33
34#define MATRIX_ROW_PINS { A3, A4, A5, A6, A7, B0 }
35#define MATRIX_COL_PINS { B13, B14, B15, A15, B3, B4, B5, B6, B7, B8, B9, C14, C15, B11, A1, A2, B12 }
36#define DIODE_DIRECTION ROW2COL
37
38/* define if matrix has ghost */
39//#define MATRIX_HAS_GHOST
40
41/* Set 0 if debouncing isn't needed */
42#define DEBOUNCE 5
43
44/*
45 * Feature disable options
46 * These options are also useful to firmware size reduction.
47 */
48
49/* disable debug print */
50//#define NO_DEBUG
51
52/* disable print */
53//#define NO_PRINT
54
55/* disable action features */
56//#define NO_ACTION_LAYER
57//#define NO_ACTION_TAPPING
58//#define NO_ACTION_ONESHOT
59//#define NO_ACTION_MACRO
60//#define NO_ACTION_FUNCTION
diff --git a/keyboards/xiaomi/mk02/halconf.h b/keyboards/xiaomi/mk02/halconf.h
new file mode 100644
index 000000000..9bcb477c0
--- /dev/null
+++ b/keyboards/xiaomi/mk02/halconf.h
@@ -0,0 +1,354 @@
1/*
2 ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
3
4 Licensed under the Apache License, Version 2.0 (the "License");
5 you may not use this file except in compliance with the License.
6 You may obtain a copy of the License at
7
8 http://www.apache.org/licenses/LICENSE-2.0
9
10 Unless required by applicable law or agreed to in writing, software
11 distributed under the License is distributed on an "AS IS" BASIS,
12 WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 See the License for the specific language governing permissions and
14 limitations under the License.
15*/
16
17/**
18 * @file templates/halconf.h
19 * @brief HAL configuration header.
20 * @details HAL configuration file, this file allows to enable or disable the
21 * various device drivers from your application. You may also use
22 * this file in order to override the device drivers default settings.
23 *
24 * @addtogroup HAL_CONF
25 * @{
26 */
27
28#ifndef _HALCONF_H_
29#define _HALCONF_H_
30
31#include "mcuconf.h"
32
33/**
34 * @brief Enables the PAL subsystem.
35 */
36#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
37#define HAL_USE_PAL TRUE
38#endif
39
40/**
41 * @brief Enables the ADC subsystem.
42 */
43#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
44#define HAL_USE_ADC FALSE
45#endif
46
47/**
48 * @brief Enables the CAN subsystem.
49 */
50#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
51#define HAL_USE_CAN FALSE
52#endif
53
54/**
55 * @brief Enables the DAC subsystem.
56 */
57#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
58#define HAL_USE_DAC FALSE
59#endif
60
61/**
62 * @brief Enables the EXT subsystem.
63 */
64#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
65#define HAL_USE_EXT FALSE
66#endif
67
68/**
69 * @brief Enables the GPT subsystem.
70 */
71#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
72#define HAL_USE_GPT FALSE
73#endif
74
75/**
76 * @brief Enables the I2C subsystem.
77 */
78#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
79#define HAL_USE_I2C FALSE
80#endif
81
82/**
83 * @brief Enables the I2S subsystem.
84 */
85#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
86#define HAL_USE_I2S FALSE
87#endif
88
89/**
90 * @brief Enables the ICU subsystem.
91 */
92#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
93#define HAL_USE_ICU FALSE
94#endif
95
96/**
97 * @brief Enables the MAC subsystem.
98 */
99#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
100#define HAL_USE_MAC FALSE
101#endif
102
103/**
104 * @brief Enables the MMC_SPI subsystem.
105 */
106#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
107#define HAL_USE_MMC_SPI FALSE
108#endif
109
110/**
111 * @brief Enables the PWM subsystem.
112 */
113#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
114#define HAL_USE_PWM TRUE
115#endif
116
117/**
118 * @brief Enables the RTC subsystem.
119 */
120#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
121#define HAL_USE_RTC FALSE
122#endif
123
124/**
125 * @brief Enables the SDC subsystem.
126 */
127#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
128#define HAL_USE_SDC FALSE
129#endif
130
131/**
132 * @brief Enables the SERIAL subsystem.
133 */
134#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
135#define HAL_USE_SERIAL FALSE
136#endif
137
138/**
139 * @brief Enables the SERIAL over USB subsystem.
140 */
141#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
142#define HAL_USE_SERIAL_USB FALSE
143#endif
144
145/**
146 * @brief Enables the SPI subsystem.
147 */
148#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
149#define HAL_USE_SPI TRUE
150#endif
151
152/**
153 * @brief Enables the UART subsystem.
154 */
155#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
156#define HAL_USE_UART FALSE
157#endif
158
159/**
160 * @brief Enables the USB subsystem.
161 */
162#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
163#define HAL_USE_USB TRUE
164#endif
165
166/**
167 * @brief Enables the WDG subsystem.
168 */
169#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
170#define HAL_USE_WDG FALSE
171#endif
172
173/*===========================================================================*/
174/* ADC driver related settings. */
175/*===========================================================================*/
176
177/**
178 * @brief Enables synchronous APIs.
179 * @note Disabling this option saves both code and data space.
180 */
181#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
182#define ADC_USE_WAIT TRUE
183#endif
184
185/**
186 * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
187 * @note Disabling this option saves both code and data space.
188 */
189#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
190#define ADC_USE_MUTUAL_EXCLUSION TRUE
191#endif
192
193/*===========================================================================*/
194/* CAN driver related settings. */
195/*===========================================================================*/
196
197/**
198 * @brief Sleep mode related APIs inclusion switch.
199 */
200#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
201#define CAN_USE_SLEEP_MODE TRUE
202#endif
203
204/*===========================================================================*/
205/* I2C driver related settings. */
206/*===========================================================================*/
207
208/**
209 * @brief Enables the mutual exclusion APIs on the I2C bus.
210 */
211#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
212#define I2C_USE_MUTUAL_EXCLUSION TRUE
213#endif
214
215/*===========================================================================*/
216/* MAC driver related settings. */
217/*===========================================================================*/
218
219/**
220 * @brief Enables an event sources for incoming packets.
221 */
222#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
223#define MAC_USE_ZERO_COPY FALSE
224#endif
225
226/**
227 * @brief Enables an event sources for incoming packets.
228 */
229#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
230#define MAC_USE_EVENTS TRUE
231#endif
232
233/*===========================================================================*/
234/* MMC_SPI driver related settings. */
235/*===========================================================================*/
236
237/**
238 * @brief Delays insertions.
239 * @details If enabled this options inserts delays into the MMC waiting
240 * routines releasing some extra CPU time for the threads with
241 * lower priority, this may slow down the driver a bit however.
242 * This option is recommended also if the SPI driver does not
243 * use a DMA channel and heavily loads the CPU.
244 */
245#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
246#define MMC_NICE_WAITING TRUE
247#endif
248
249/*===========================================================================*/
250/* SDC driver related settings. */
251/*===========================================================================*/
252
253/**
254 * @brief Number of initialization attempts before rejecting the card.
255 * @note Attempts are performed at 10mS intervals.
256 */
257#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
258#define SDC_INIT_RETRY 100
259#endif
260
261/**
262 * @brief Include support for MMC cards.
263 * @note MMC support is not yet implemented so this option must be kept
264 * at @p FALSE.
265 */
266#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
267#define SDC_MMC_SUPPORT FALSE
268#endif
269
270/**
271 * @brief Delays insertions.
272 * @details If enabled this options inserts delays into the MMC waiting
273 * routines releasing some extra CPU time for the threads with
274 * lower priority, this may slow down the driver a bit however.
275 */
276#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
277#define SDC_NICE_WAITING TRUE
278#endif
279
280/*===========================================================================*/
281/* SERIAL driver related settings. */
282/*===========================================================================*/
283
284/**
285 * @brief Default bit rate.
286 * @details Configuration parameter, this is the baud rate selected for the
287 * default configuration.
288 */
289#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
290#define SERIAL_DEFAULT_BITRATE 38400
291#endif
292
293/**
294 * @brief Serial buffers size.
295 * @details Configuration parameter, you can change the depth of the queue
296 * buffers depending on the requirements of your application.
297 * @note The default is 64 bytes for both the transmission and receive
298 * buffers.
299 */
300#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
301#define SERIAL_BUFFERS_SIZE 16
302#endif
303
304/*===========================================================================*/
305/* SERIAL_USB driver related setting. */
306/*===========================================================================*/
307
308/**
309 * @brief Serial over USB buffers size.
310 * @details Configuration parameter, the buffer size must be a multiple of
311 * the USB data endpoint maximum packet size.
312 * @note The default is 64 bytes for both the transmission and receive
313 * buffers.
314 */
315#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
316#define SERIAL_USB_BUFFERS_SIZE 1
317#endif
318
319/*===========================================================================*/
320/* SPI driver related settings. */
321/*===========================================================================*/
322
323/**
324 * @brief Enables synchronous APIs.
325 * @note Disabling this option saves both code and data space.
326 */
327#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
328#define SPI_USE_WAIT TRUE
329#endif
330
331/**
332 * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
333 * @note Disabling this option saves both code and data space.
334 */
335#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
336#define SPI_USE_MUTUAL_EXCLUSION TRUE
337#endif
338
339
340/*===========================================================================*/
341/* USB driver related settings. */
342/*===========================================================================*/
343
344/**
345 * @brief Enables synchronous APIs.
346 * @note Disabling this option saves both code and data space.
347 */
348#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
349#define USB_USE_WAIT TRUE
350#endif
351
352#endif /* _HALCONF_H_ */
353
354/** @} */
diff --git a/keyboards/xiaomi/mk02/keymaps/default/keymap.c b/keyboards/xiaomi/mk02/keymaps/default/keymap.c
new file mode 100644
index 000000000..cea3aae57
--- /dev/null
+++ b/keyboards/xiaomi/mk02/keymaps/default/keymap.c
@@ -0,0 +1,27 @@
1/* Copyright 2019 Ryota Goto
2
3This program is free software: you can redistribute it and/or modify
4it under the terms of the GNU General Public License as published by
5the Free Software Foundation, either version 2 of the License, or
6(at your option) any later version.
7
8This program is distributed in the hope that it will be useful,
9but WITHOUT ANY WARRANTY; without even the implied warranty of
10MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11GNU General Public License for more details.
12
13You should have received a copy of the GNU General Public License
14along with this program. If not, see <http://www.gnu.org/licenses/>.
15*/
16#include QMK_KEYBOARD_H
17
18const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
19 [0] = LAYOUT_tkl_ansi( /* Base */
20 KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \
21 KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \
22 KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \
23 KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
24 KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \
25 KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \
26 ),
27};
diff --git a/keyboards/xiaomi/mk02/ld/STM32F072_0x2000_bootloader.ld b/keyboards/xiaomi/mk02/ld/STM32F072_0x2000_bootloader.ld
new file mode 100644
index 000000000..65441f471
--- /dev/null
+++ b/keyboards/xiaomi/mk02/ld/STM32F072_0x2000_bootloader.ld
@@ -0,0 +1,85 @@
1/*
2 ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
3
4 Licensed under the Apache License, Version 2.0 (the "License");
5 you may not use this file except in compliance with the License.
6 You may obtain a copy of the License at
7
8 http://www.apache.org/licenses/LICENSE-2.0
9
10 Unless required by applicable law or agreed to in writing, software
11 distributed under the License is distributed on an "AS IS" BASIS,
12 WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 See the License for the specific language governing permissions and
14 limitations under the License.
15*/
16
17/*
18 * STM32F072x8 memory setup - with a 0x2000 user bootloader
19 */
20MEMORY
21{
22 flash0 : org = 0x08002000, len = 64k - 0x2000
23 flash1 : org = 0x00000000, len = 0
24 flash2 : org = 0x00000000, len = 0
25 flash3 : org = 0x00000000, len = 0
26 flash4 : org = 0x00000000, len = 0
27 flash5 : org = 0x00000000, len = 0
28 flash6 : org = 0x00000000, len = 0
29 flash7 : org = 0x00000000, len = 0
30 ram0 : org = 0x20000000, len = 16k
31 ram1 : org = 0x00000000, len = 0
32 ram2 : org = 0x00000000, len = 0
33 ram3 : org = 0x00000000, len = 0
34 ram4 : org = 0x00000000, len = 0
35 ram5 : org = 0x00000000, len = 0
36 ram6 : org = 0x00000000, len = 0
37 ram7 : org = 0x00000000, len = 0
38}
39
40/* For each data/text section two region are defined, a virtual region
41 and a load region (_LMA suffix).*/
42
43/* Flash region to be used for exception vectors.*/
44REGION_ALIAS("VECTORS_FLASH", flash0);
45REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
46
47/* Flash region to be used for constructors and destructors.*/
48REGION_ALIAS("XTORS_FLASH", flash0);
49REGION_ALIAS("XTORS_FLASH_LMA", flash0);
50
51/* Flash region to be used for code text.*/
52REGION_ALIAS("TEXT_FLASH", flash0);
53REGION_ALIAS("TEXT_FLASH_LMA", flash0);
54
55/* Flash region to be used for read only data.*/
56REGION_ALIAS("RODATA_FLASH", flash0);
57REGION_ALIAS("RODATA_FLASH_LMA", flash0);
58
59/* Flash region to be used for various.*/
60REGION_ALIAS("VARIOUS_FLASH", flash0);
61REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);
62
63/* Flash region to be used for RAM(n) initialization data.*/
64REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);
65
66/* RAM region to be used for Main stack. This stack accommodates the processing
67 of all exceptions and interrupts.*/
68REGION_ALIAS("MAIN_STACK_RAM", ram0);
69
70/* RAM region to be used for the process stack. This is the stack used by
71 the main() function.*/
72REGION_ALIAS("PROCESS_STACK_RAM", ram0);
73
74/* RAM region to be used for data segment.*/
75REGION_ALIAS("DATA_RAM", ram0);
76REGION_ALIAS("DATA_RAM_LMA", flash0);
77
78/* RAM region to be used for BSS segment.*/
79REGION_ALIAS("BSS_RAM", ram0);
80
81/* RAM region to be used for the default heap.*/
82REGION_ALIAS("HEAP_RAM", ram0);
83
84/* Generic rules inclusion.*/
85INCLUDE rules.ld
diff --git a/keyboards/xiaomi/mk02/mcuconf.h b/keyboards/xiaomi/mk02/mcuconf.h
new file mode 100644
index 000000000..43fe0a462
--- /dev/null
+++ b/keyboards/xiaomi/mk02/mcuconf.h
@@ -0,0 +1,176 @@
1/*
2 ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
3
4 Licensed under the Apache License, Version 2.0 (the "License");
5 you may not use this file except in compliance with the License.
6 You may obtain a copy of the License at
7
8 http://www.apache.org/licenses/LICENSE-2.0
9
10 Unless required by applicable law or agreed to in writing, software
11 distributed under the License is distributed on an "AS IS" BASIS,
12 WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 See the License for the specific language governing permissions and
14 limitations under the License.
15*/
16
17#ifndef _MCUCONF_H_
18#define _MCUCONF_H_
19
20/*
21 * STM32F0xx drivers configuration.
22 * The following settings override the default settings present in
23 * the various device driver implementation headers.
24 * Note that the settings for each driver only have effect if the whole
25 * driver is enabled in halconf.h.
26 *
27 * IRQ priorities:
28 * 3...0 Lowest...Highest.
29 *
30 * DMA priorities:
31 * 0...3 Lowest...Highest.
32 */
33
34#define STM32F0xx_MCUCONF
35// #define STM32F070xB
36
37/*
38 * HAL driver system settings.
39 */
40#define STM32_NO_INIT FALSE
41#define STM32_PVD_ENABLE FALSE
42#define STM32_PLS STM32_PLS_LEV0
43#define STM32_HSI_ENABLED TRUE
44#define STM32_HSI14_ENABLED TRUE
45#define STM32_HSI48_ENABLED FALSE
46#define STM32_LSI_ENABLED TRUE
47#define STM32_HSE_ENABLED FALSE
48#define STM32_LSE_ENABLED FALSE
49#define STM32_SW STM32_SW_PLL
50#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2
51#define STM32_PREDIV_VALUE 1
52#define STM32_PLLMUL_VALUE 12
53#define STM32_HPRE STM32_HPRE_DIV1
54#define STM32_PPRE STM32_PPRE_DIV1
55#define STM32_ADCSW STM32_ADCSW_HSI14
56#define STM32_ADCPRE STM32_ADCPRE_DIV4
57#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
58#define STM32_ADCPRE STM32_ADCPRE_DIV4
59#define STM32_ADCSW STM32_ADCSW_HSI14
60#define STM32_USBSW STM32_USBSW_HSI48
61#define STM32_CECSW STM32_CECSW_HSI
62#define STM32_I2C1SW STM32_I2C1SW_HSI
63#define STM32_USART1SW STM32_USART1SW_PCLK
64#define STM32_RTCSEL STM32_RTCSEL_LSI
65
66/*
67 * ADC driver system settings.
68 */
69#define STM32_ADC_USE_ADC1 FALSE
70#define STM32_ADC_ADC1_DMA_PRIORITY 2
71#define STM32_ADC_IRQ_PRIORITY 2
72#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
73
74/*
75 * EXT driver system settings.
76 */
77#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3
78#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3
79#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3
80#define STM32_EXT_EXTI16_IRQ_PRIORITY 3
81#define STM32_EXT_EXTI17_IRQ_PRIORITY 3
82
83/*
84 * GPT driver system settings.
85 */
86#define STM32_GPT_USE_TIM1 FALSE
87#define STM32_GPT_USE_TIM2 FALSE
88#define STM32_GPT_USE_TIM3 FALSE
89#define STM32_GPT_USE_TIM14 FALSE
90#define STM32_GPT_TIM1_IRQ_PRIORITY 2
91#define STM32_GPT_TIM2_IRQ_PRIORITY 2
92#define STM32_GPT_TIM3_IRQ_PRIORITY 2
93#define STM32_GPT_TIM14_IRQ_PRIORITY 2
94
95/*
96 * I2C driver system settings.
97 */
98#define STM32_I2C_USE_I2C1 FALSE
99#define STM32_I2C_USE_I2C2 FALSE
100#define STM32_I2C_BUSY_TIMEOUT 50
101#define STM32_I2C_I2C1_IRQ_PRIORITY 3
102#define STM32_I2C_I2C2_IRQ_PRIORITY 3
103#define STM32_I2C_USE_DMA TRUE
104#define STM32_I2C_I2C1_DMA_PRIORITY 1
105#define STM32_I2C_I2C2_DMA_PRIORITY 1
106#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
107#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
108#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
109
110/*
111 * ICU driver system settings.
112 */
113#define STM32_ICU_USE_TIM1 FALSE
114#define STM32_ICU_USE_TIM2 FALSE
115#define STM32_ICU_USE_TIM3 FALSE
116#define STM32_ICU_TIM1_IRQ_PRIORITY 3
117#define STM32_ICU_TIM2_IRQ_PRIORITY 3
118#define STM32_ICU_TIM3_IRQ_PRIORITY 3
119
120/*
121 * PWM driver system settings.
122 */
123#define STM32_PWM_USE_ADVANCED FALSE
124#define STM32_PWM_USE_TIM1 FALSE
125#define STM32_PWM_USE_TIM2 FALSE
126#define STM32_PWM_USE_TIM3 TRUE
127#define STM32_PWM_TIM1_IRQ_PRIORITY 3
128#define STM32_PWM_TIM2_IRQ_PRIORITY 3
129#define STM32_PWM_TIM3_IRQ_PRIORITY 3
130
131/*
132 * SERIAL driver system settings.
133 */
134#define STM32_SERIAL_USE_USART1 FALSE
135#define STM32_SERIAL_USE_USART2 FALSE
136#define STM32_SERIAL_USART1_PRIORITY 3
137#define STM32_SERIAL_USART2_PRIORITY 3
138
139/*
140 * SPI driver system settings.
141 */
142#define STM32_SPI_USE_SPI1 FALSE
143#define STM32_SPI_USE_SPI2 TRUE
144#define STM32_SPI_SPI1_DMA_PRIORITY 1
145#define STM32_SPI_SPI2_DMA_PRIORITY 1
146#define STM32_SPI_SPI1_IRQ_PRIORITY 2
147#define STM32_SPI_SPI2_IRQ_PRIORITY 2
148#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
149#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
150#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
151
152/*
153 * ST driver system settings.
154 */
155#define STM32_ST_IRQ_PRIORITY 2
156#define STM32_ST_USE_TIMER 2
157
158/*
159 * UART driver system settings.
160 */
161#define STM32_UART_USE_USART1 FALSE
162#define STM32_UART_USE_USART2 FALSE
163#define STM32_UART_USART1_IRQ_PRIORITY 3
164#define STM32_UART_USART2_IRQ_PRIORITY 3
165#define STM32_UART_USART1_DMA_PRIORITY 0
166#define STM32_UART_USART2_DMA_PRIORITY 0
167#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
168
169/*
170 * USB driver system settings.
171 */
172#define STM32_USB_USE_USB1 TRUE
173#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
174#define STM32_USB_USB1_LP_IRQ_PRIORITY 3
175
176#endif /* _MCUCONF_H_ */
diff --git a/keyboards/xiaomi/mk02/mk02.c b/keyboards/xiaomi/mk02/mk02.c
new file mode 100644
index 000000000..d3ecc155f
--- /dev/null
+++ b/keyboards/xiaomi/mk02/mk02.c
@@ -0,0 +1,8 @@
1#include "mk02.h"
2
3void bootloader_jump(void) {
4 uint32_t *magic_address = (void*)0x20000FFC;
5 *magic_address = 0x626c6472;
6
7 NVIC_SystemReset();
8}
diff --git a/keyboards/xiaomi/mk02/mk02.h b/keyboards/xiaomi/mk02/mk02.h
new file mode 100644
index 000000000..12a7c8e1a
--- /dev/null
+++ b/keyboards/xiaomi/mk02/mk02.h
@@ -0,0 +1,20 @@
1#pragma once
2
3#include "quantum.h"
4
5#define LAYOUT_tkl_ansi( \
6 K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K015, K016, \
7 K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, \
8 K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, \
9 K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, \
10 K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K412, K414, \
11 K500, K501, K502, K505, K509, K510, K511, K512, K513, K514, K515 \
12) \
13{ \
14 { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, KC_NO, K014, K015, K016 }, \
15 { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116 }, \
16 { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216 }, \
17 { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, KC_NO, KC_NO, KC_NO, KC_NO }, \
18 { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, KC_NO, K412, KC_NO, K414, KC_NO, KC_NO }, \
19 { K500, K501, K502, KC_NO, KC_NO, K505, KC_NO, KC_NO, KC_NO, K509, K510, K511, K512, K513, K514, K515, KC_NO } \
20}
diff --git a/keyboards/xiaomi/mk02/rules.mk b/keyboards/xiaomi/mk02/rules.mk
new file mode 100644
index 000000000..93ff487dc
--- /dev/null
+++ b/keyboards/xiaomi/mk02/rules.mk
@@ -0,0 +1,17 @@
1# MCU name
2MCU = STM32F072
3MCU_LDSCRIPT = STM32F072_0x2000_bootloader
4
5DFU_ARGS = -d 0483:df11 -a 0 -s 0x08002000:leave
6DFU_SUFFIX_ARGS = -v 0483 -p DF11
7
8BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
9MOUSEKEY_ENABLE = no # Mouse keys
10EXTRAKEY_ENABLE = no # Audio control and System control
11CONSOLE_ENABLE = no # Console for debug
12COMMAND_ENABLE = no # Commands for debug and configuration
13SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
14NKRO_ENABLE = no # USB Nkey Rollover
15CUSTOM_MATRIX = no # Custom matrix file
16# BACKLIGHT_ENABLE = yes # This is broken on 072 for some reason
17RGBLIGHT_ENABLE = no
generated by cgit v1.2.3 (git 2.25.1) at 2025-11-18 19:29:14 +0000