51 files changed, 867 insertions, 136 deletions
diff --git a/keyboards/kingly_keys/little_foot/config.h b/keyboards/kingly_keys/little_foot/config.h
new file mode 100644
index 000000000..e0bd0daf9
--- /dev/null
+++ b/keyboards/kingly_keys/little_foot/config.h
@@ -0,0 +1,58 @@
+/* Copyright 2019 Garret G. (TheRoyalSweatshirt)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.#pragma once 
+ */
+#pragma once
+#include "config_common.h"
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Kingly-Keys
+#define PRODUCT         The Little Foot
+#define DESCRIPTION     A Mighty Small, 45-Percent, Ortholinear Keyboard.
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 10
+/* key matrix pins */
+#define MATRIX_ROW_PINS { F6, B6, B2, B3, B1 }
+#define MATRIX_COL_PINS { F5, F7, B5, B4, E6, D7, C6, D4, D0, D1 }
+#define UNUSED_PINS
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+#define FORCE_NKRO
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+/* ws2812 RGB LED */
+#define RGB_DI_PIN F4
+#define RGBLED_NUM 10    // Number of LEDs
+#define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_HUE_STEP 6
+#define RGBLIGHT_SAT_STEP 4
+#define RGBLIGHT_VAL_STEP 8
diff --git a/keyboards/kingly_keys/little_foot/info.json b/keyboards/kingly_keys/little_foot/info.json
new file mode 100644
index 000000000..6a8d50894
--- /dev/null
+++ b/keyboards/kingly_keys/little_foot/info.json
@@ -0,0 +1,16 @@
+{
+  "keyboard_name": "Little Foot",
+  "url": "",
+  "maintainer": "TheRoyalSweatshirt",
+  "width": 10,
+  "height": 5,
+  "layouts": {
+    "LAYOUT_split_space_base": {
+      "key_count": 44,
+      "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":1.5, "y":4, "w":1.5}, {"x":3, "y":4, "w":2}, {"x":5, "y":4, "w":2}, {"x":7, "y":4, "w":1.5}]
+    },
+      "LAYOUT_big_space_base": {
+        "key_count": 41,
+        "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":1.5, "y":4, "w":7}]
+    }
+}
diff --git a/keyboards/kingly_keys/little_foot/keymaps/default/keymap.c b/keyboards/kingly_keys/little_foot/keymaps/default/keymap.c
new file mode 100644
index 000000000..e85e0d6c4
--- /dev/null
+++ b/keyboards/kingly_keys/little_foot/keymaps/default/keymap.c
@@ -0,0 +1,40 @@
+#include QMK_KEYBOARD_H
+// Layer names
+enum{
+  // - Base layer:
+  _BASE,
+  // - Symbols, numbers, and functions:
+  _FN,
+  // - Alternate Function layer:
+  _LN
+};
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT_split_space_base(
+    KC_1,   KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,             KC_0,
+    KC_Q,   KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,             KC_P,
+    KC_A,   KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,          KC_SCLN,
+    KC_Z,   KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,         KC_ENT,
+                MO(_FN),          KC_LSHIFT,          KC_SPACE,                 RGB_MOD
+  ),
+  [_FN] = LAYOUT_split_space_base(
+    LT(_LN, KC_ESC), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_MINS, KC_BSPC,
+    KC_TAB,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, LSFT(KC_MINS),    KC_BSLS,
+    KC_LSFT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC,          KC_QUOT,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,   KC_TRNS, KC_TRNS,          KC_TRNS,
+                  KC_TRNS,            KC_LALT,        KC_TRNS,              KC_LCTRL
+  ), 
+  [_LN] = LAYOUT_split_space_base(
+    KC_TRNS,   KC_F1,   KC_F2,  KC_F3,    KC_TRNS,    KC_TRNS,   KC_TRNS,    KC_7,    KC_8,    KC_9,
+    KC_TRNS,   KC_F4,   KC_F5,  KC_F6,    KC_TRNS,    KC_TRNS,   KC_TRNS,    KC_4,    KC_5,    KC_6,
+    KC_TRNS,   KC_F7,   KC_F8,  KC_F9,    KC_TRNS,    KC_TRNS,   KC_TRNS,    KC_1,    KC_2,    KC_3,
+    KC_TRNS,   KC_F10,  KC_F11, KC_F12,   KC_TRNS,    KC_TRNS,   KC_TRNS,   KC_TRNS,  KC_0, KC_TRNS,
+                  KC_TRNS,             KC_TRNS,          KC_TRNS,                KC_TRNS
+  )
+};
diff --git a/keyboards/kingly_keys/little_foot/little_foot.c b/keyboards/kingly_keys/little_foot/little_foot.c
new file mode 100644
index 000000000..5513b113a
--- /dev/null
+++ b/keyboards/kingly_keys/little_foot/little_foot.c
@@ -0,0 +1 @@
+#include "little_foot.h"
diff --git a/keyboards/kingly_keys/little_foot/little_foot.h b/keyboards/kingly_keys/little_foot/little_foot.h
new file mode 100644
index 000000000..860eaeb8f
--- /dev/null
+++ b/keyboards/kingly_keys/little_foot/little_foot.h
@@ -0,0 +1,35 @@
+#pragma once
+#include "quantum.h"
+#define XXX KC_NO
+#define LAYOUT_split_space_base( \
+    k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, \
+    k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, \
+    k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, \
+    k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, \
+         k42,        k46,      k47,         k49        \
+) \
+{ \
+    { k01, k02, k03, k04, k05, k06, k07, k08, k09, k010 }, \
+    { k11, k12, k13, k14, k15, k16, k17, k18, k19, k110 }, \
+    { k21, k22, k23, k24, k25, k26, k27, k28, k29, k210 }, \
+    { k31, k32, k33, k34, k35, k36, k37, k38, k39, k310 }, \
+    { XXX, k42, XXX, XXX, XXX, k46, k47, XXX, k49, XXX  }  \
+}
+#define LAYOUT_big_space_base( \
+    k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, \
+    k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, \
+    k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, \
+    k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, \
+                           k46                         \
+) \
+{ \
+    { k01, k02, k03, k04, k05, k06, k07, k08, k09, k010 }, \
+    { k11, k12, k13, k14, k15, k16, k17, k18, k19, k110 }, \
+    { k21, k22, k23, k24, k25, k26, k27, k28, k29, k210 }, \
+    { k31, k32, k33, k34, k35, k36, k37, k38, k39, k310 }, \
+    { XXX, k42, XXX, XXX, XXX, k46, XXX, XXX, k49, XXX  }  \
+}
diff --git a/keyboards/kingly_keys/little_foot/readme.md b/keyboards/kingly_keys/little_foot/readme.md
new file mode 100644
index 000000000..1052952cd
--- /dev/null
+++ b/keyboards/kingly_keys/little_foot/readme.md
@@ -0,0 +1,17 @@
+# Little Foot
+![Little_Foot](https://i.imgur.com/M0Usdtg.jpg)
+===
+A mighty small keyboard.
+Keyboard Maintainer: Garret G. - a.k.a. [The_Royal](https://www.reddit.com/user/The_Royal/) on Reddit, and [TheRoyalSweatshirt](https://github.com/TheRoyalSweatshirt) on GitHub
+Hardware Supported: Little_Foot Rev1.2 & Rev1.4, Pro-Micro, and Elite-C  
+Hardware Availability: Through GB or Direct Message 
+Make example for this keyboard (after setting up your build environment):
+    make kingly_keys/little_foot:default
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/kingly_keys/little_foot/rules.mk b/keyboards/kingly_keys/little_foot/rules.mk
new file mode 100644
index 000000000..0c3011db9
--- /dev/null
+++ b/keyboards/kingly_keys/little_foot/rules.mk
@@ -0,0 +1,25 @@
+# MCU name
+MCU = atmega32u4
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes   # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes   # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no     # Commands for debug and configuration
+SLEEP_LED_ENABLE = no   # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes               # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = yes
diff --git a/keyboards/romac/config.h b/keyboards/kingly_keys/romac/config.h
index da236c500..da236c500 100644
--- a/keyboards/romac/config.h
+++ b/keyboards/kingly_keys/romac/config.h
diff --git a/keyboards/romac/info.json b/keyboards/kingly_keys/romac/info.json
index 305785991..305785991 100644
--- a/keyboards/romac/info.json
+++ b/keyboards/kingly_keys/romac/info.json
diff --git a/keyboards/romac/keymaps/default/keymap.c b/keyboards/kingly_keys/romac/keymaps/default/keymap.c
index 35636f36b..44263453d 100644
--- a/keyboards/romac/keymaps/default/keymap.c
+++ b/keyboards/kingly_keys/romac/keymaps/default/keymap.c
@@ -25,13 +25,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                KC_7, KC_8, KC_9, \
                KC_4, KC_5, KC_6, \
                KC_1, KC_2, KC_3, \
-                MO(_FN1), KC_0, KC_ENT \
+                MO(1), KC_0, KC_DOT \
        ),
  
        [_FN1] = LAYOUT(
                KC_TRNS, KC_HOME, KC_PGUP, \
                KC_TRNS, KC_END, KC_PGDN, \
                KC_TRNS, KC_TRNS, KC_TRNS, \
-                KC_TRNS, KC_TRNS, KC_DOT \
+                KC_TRNS, KC_TRNS, KC_ENT \
        )
 };
diff --git a/keyboards/romac/keymaps/jarred/keymap.c b/keyboards/kingly_keys/romac/keymaps/jarred/keymap.c
index 472e99004..472e99004 100644
--- a/keyboards/romac/keymaps/jarred/keymap.c
+++ b/keyboards/kingly_keys/romac/keymaps/jarred/keymap.c
diff --git a/keyboards/romac/keymaps/stanrc85/config.h b/keyboards/kingly_keys/romac/keymaps/stanrc85/config.h
index 722fd7e9e..722fd7e9e 100644
--- a/keyboards/romac/keymaps/stanrc85/config.h
+++ b/keyboards/kingly_keys/romac/keymaps/stanrc85/config.h
diff --git a/keyboards/romac/keymaps/stanrc85/keymap.c b/keyboards/kingly_keys/romac/keymaps/stanrc85/keymap.c
index ecca61cae..ecca61cae 100644
--- a/keyboards/romac/keymaps/stanrc85/keymap.c
+++ b/keyboards/kingly_keys/romac/keymaps/stanrc85/keymap.c
diff --git a/keyboards/romac/keymaps/stanrc85/rules.mk b/keyboards/kingly_keys/romac/keymaps/stanrc85/rules.mk
index 1e3cebb14..1e3cebb14 100644
--- a/keyboards/romac/keymaps/stanrc85/rules.mk
+++ b/keyboards/kingly_keys/romac/keymaps/stanrc85/rules.mk
diff --git a/keyboards/romac/readme.md b/keyboards/kingly_keys/romac/readme.md
index 98ed21502..98ed21502 100644
--- a/keyboards/romac/readme.md
+++ b/keyboards/kingly_keys/romac/readme.md
diff --git a/keyboards/romac/romac.c b/keyboards/kingly_keys/romac/romac.c
index 24f4c1633..24f4c1633 100644
--- a/keyboards/romac/romac.c
+++ b/keyboards/kingly_keys/romac/romac.c
diff --git a/keyboards/romac/romac.h b/keyboards/kingly_keys/romac/romac.h
index e6fb9694d..e6fb9694d 100644
--- a/keyboards/romac/romac.h
+++ b/keyboards/kingly_keys/romac/romac.h
diff --git a/keyboards/kingly_keys/romac/rules.mk b/keyboards/kingly_keys/romac/rules.mk
new file mode 100644
index 000000000..1dd9bd658
--- /dev/null
+++ b/keyboards/kingly_keys/romac/rules.mk
@@ -0,0 +1,26 @@
+# MCU name
+MCU = atmega32u4
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = full # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes   # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes   # Audio control and System control(+450)
+CONSOLE_ENABLE = no     # Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes               # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = no
diff --git a/keyboards/kingly_keys/romac_plus/config.h b/keyboards/kingly_keys/romac_plus/config.h
new file mode 100644
index 000000000..503a463f5
--- /dev/null
+++ b/keyboards/kingly_keys/romac_plus/config.h
@@ -0,0 +1,46 @@
+#pragma once
+#include "config_common.h"
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    TheRoyalSweatshirt
+#define PRODUCT         RoMac+
+#define DESCRIPTION     A *Plaid inspired twelve-key macropad with upgraded features
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 3
+/* key matrix pins */
+#define MATRIX_ROW_PINS { C6, D4, D2, D3 }
+#define MATRIX_COL_PINS { F6, F5, F4 }
+#define UNUSED_PINS
+#define ENCODERS_PAD_A { B3 }
+#define ENCODERS_PAD_B { B2 }
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 0
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+/* ws2812 RGB LED */
+#define RGB_DI_PIN F7
+#define RGBLED_NUM 4    // Number of LEDs
+#define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_HUE_STEP 6
+#define RGBLIGHT_SAT_STEP 4
+#define RGBLIGHT_VAL_STEP 8
diff --git a/keyboards/kingly_keys/romac_plus/info.json b/keyboards/kingly_keys/romac_plus/info.json
new file mode 100644
index 000000000..5c73db5b2
--- /dev/null
+++ b/keyboards/kingly_keys/romac_plus/info.json
@@ -0,0 +1,13 @@
+{
+  "keyboard_name": "RoMac+",
+  "url": "",
+  "maintainer": "TheRoyalSweatshirt",
+  "width": 3,
+  "height": 4,
+  "layouts": {
+    "LAYOUT": {
+      "key_count": 12,
+          "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}]
+        }
+  }
+}
diff --git a/keyboards/kingly_keys/romac_plus/keymaps/default/keymap.c b/keyboards/kingly_keys/romac_plus/keymaps/default/keymap.c
new file mode 100644
index 000000000..556af1d1e
--- /dev/null
+++ b/keyboards/kingly_keys/romac_plus/keymaps/default/keymap.c
@@ -0,0 +1,65 @@
+/* Copyright 2018 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+#define BASE 0
+#define FN 1
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+        [BASE] = LAYOUT(
+                KC_7, KC_8, KC_9,
+                KC_4, KC_5, KC_6,
+                KC_1, KC_2, KC_3,
+                MO(1), KC_0, KC_DOT
+        ),
+  
+        [FN] = LAYOUT(
+                KC_TRNS, KC_HOME, KC_PGUP,
+                KC_TRNS, KC_END, KC_PGDN,
+                KC_TRNS, KC_TRNS, KC_TRNS,
+                KC_TRNS, KC_TRNS, KC_ENT
+        )
+};
+#ifdef OLED_DRIVER_ENABLE
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+    return OLED_ROTATION_270;  // flips the display 180 degrees if offhand
+}
+void oled_task_user(void) {
+  // Host Keyboard Layer Status
+  oled_write_P(PSTR("Let's\nbuild\nsome-\nthing\nto-\nget-\nher!"), false);
+  switch (get_highest_layer(layer_state)) {
+    case BASE:
+      oled_write_ln_P(PSTR(""), false);
+      break;
+    case FN:
+      oled_write_ln_P(PSTR("FN"), false);
+      break;
+    default:
+      // Or use the write_ln shortcut over adding '\n' to the end of your string
+      oled_write_ln_P(PSTR("Undef"), false);
+  }
+  // Host Keyboard LED Status
+  uint8_t led_usb_state = host_keyboard_leds();
+  oled_write_P(IS_LED_ON(led_usb_state, USB_LED_NUM_LOCK) ? PSTR("NLCK ") : PSTR("     "), false);
+  oled_write_P(IS_LED_ON(led_usb_state, USB_LED_CAPS_LOCK) ? PSTR("CAPS ") : PSTR("       "), false);
+  oled_write_P(IS_LED_ON(led_usb_state, USB_LED_SCROLL_LOCK) ? PSTR("SCRLK") : PSTR("       "), false);
+}
+#endif
diff --git a/keyboards/kingly_keys/romac_plus/readme.md b/keyboards/kingly_keys/romac_plus/readme.md
new file mode 100644
index 000000000..4411701ca
--- /dev/null
+++ b/keyboards/kingly_keys/romac_plus/readme.md
@@ -0,0 +1,16 @@
+# RoMac+
+![RoMac+](https://i.imgur.com/YJ2nCrS.png)
+An Upgraded “Plaid” Inspired 12-Key (3x4) Macropad With Fancy Features.
+- Keyboard Maintainer: [Garret G.](https://github.com/TheRoyalSweatshirt)
+- Hardware Supported: RoMac+ Rev3.0, Pro Micro, Elite-C, Proton C, BlueMicro.
+- Hardware Availability: Through Online Store [Kingly-Keys](https://kingly-keys.xyz/)  (Stock Varies).
+Make example for this keyboard (after setting up your build environment):
+    make romac_plus:default
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/kingly_keys/romac_plus/romac_plus.c b/keyboards/kingly_keys/romac_plus/romac_plus.c
new file mode 100644
index 000000000..1e95f36c7
--- /dev/null
+++ b/keyboards/kingly_keys/romac_plus/romac_plus.c
@@ -0,0 +1,2 @@
+#include "romac_plus.h"
+ 
+\ No newline at end of file
diff --git a/keyboards/kingly_keys/romac_plus/romac_plus.h b/keyboards/kingly_keys/romac_plus/romac_plus.h
new file mode 100644
index 000000000..e6fb9694d
--- /dev/null
+++ b/keyboards/kingly_keys/romac_plus/romac_plus.h
@@ -0,0 +1,16 @@
+#pragma once
+#include "quantum.h"
+#define LAYOUT( \
+        K00, K01, K02, \
+        K10, K11, K12, \
+        K20, K21, K22, \
+        K30, K31, K32  \
+) \
+{ \
+        { K00,   K01,   K02 }, \
+        { K10,   K11,   K12 }, \
+        { K20,   K21,   K22 }, \
+        { K30,   K31,   K32 }  \
+}
diff --git a/keyboards/kingly_keys/romac_plus/rules.mk b/keyboards/kingly_keys/romac_plus/rules.mk
new file mode 100644
index 000000000..d0aab2dd1
--- /dev/null
+++ b/keyboards/kingly_keys/romac_plus/rules.mk
@@ -0,0 +1,24 @@
+MCU = atmega32u4
+BOOTLOADER = caterina
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes      # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no             # Enable support for HD44780 based LCDs (+400)
+ENCODER_ENABLE = yes        # Enable support for EC11 Rotary Encoder
+OLED_DRIVER_ENABLE = yes    # Enable Support for SSD1306 or SH1106 OLED Displays; Communicating over I2C
diff --git a/keyboards/ropro/config.h b/keyboards/kingly_keys/ropro/config.h
index 5079217f9..3784ebc62 100644
--- a/keyboards/ropro/config.h
+++ b/keyboards/kingly_keys/ropro/config.h
@@ -53,6 +53,8 @@
 /* ws2812 RGB LED --- DIN Pin Routed to VIA on main PCB marked "RGB" */
 #define RGB_DI_PIN D3
+#define RGBLED_NUM 18
 #define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 16
diff --git a/keyboards/ropro/info.json b/keyboards/kingly_keys/ropro/info.json
index f7b62f664..f7b62f664 100644
--- a/keyboards/ropro/info.json
+++ b/keyboards/kingly_keys/ropro/info.json
diff --git a/keyboards/ropro/keymaps/default/keymap.c b/keyboards/kingly_keys/ropro/keymaps/default/keymap.c
index 6e6da8f9a..1bbe1c262 100644
--- a/keyboards/ropro/keymaps/default/keymap.c
+++ b/keyboards/kingly_keys/ropro/keymaps/default/keymap.c
@@ -30,9 +30,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   *        |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10  | F11 |  F12 |
   *        |------+------+------+------+------+-------------+------+------+------+------+------|
   *        | Esc  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |   -  |
-   *        |+------+------+------+------+-----+------+------+------+------+------+------+------|--------------.
+   *        |+------+------+------+------+-----+------+------+------+------+------+------+------|
-   *        | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp | Rotary Click |
+   *  RotEn | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
-   * ,------+------+------+------+------+------+------+------+------+------+------+------+------|--------------'
+   * ,------+------+------+------+------+------+------+------+------+------+------+------+------|
   * | PgUp | Ctrl |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
   * |------+------+------+------+------+------+-------------+------+------+------+------+------|
   * | Lower| Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
@@ -43,9 +43,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
        [_BASE] = LAYOUT(
              KC_F1,     KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,    KC_F11,    KC_F12,
              KC_ESC,    KC_1,     KC_2,     KC_3,     KC_4,     KC_5,     KC_6,     KC_7,     KC_8,     KC_9,      KC_0,    KC_MINUS,
-KC_CAPS,      KC_TAB,    KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,     KC_Y,     KC_U,     KC_I,     KC_O,      KC_P,     KC_BSPC,   
+    KC_NO,    KC_TAB,    KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,     KC_Y,     KC_U,     KC_I,     KC_O,      KC_P,     KC_BSPC,   
    KC_PGUP,  KC_LCTRL,  KC_A,     KC_S,     KC_D,     KC_F,     KC_G,     KC_H,     KC_J,     KC_K,     KC_L,      KC_SCLN,  KC_QUOT,
-    LOWER,    KC_LSHIFT, KC_Z,     KC_X,     KC_C,     KC_V,     KC_B,     KC_N,     KC_M,     KC_COMM,  KC_DOT,    KC_SLSH,   KC_ENT,
+    KC_HOME,  KC_LSFT,  KC_Z,     KC_X,     KC_C,     KC_V,     KC_B,     KC_N,     KC_M,     KC_COMM,  KC_DOT,    KC_SLSH,   KC_ENT,
    KC_PGDN,  KC_DEL,    KC_RCTRL, KC_LGUI,  KC_LALT,  LOWER,    KC_SPC,   KC_SPC,   KC_END,   KC_LEFT,  KC_DOWN,   KC_UP,    KC_RGHT
  ),
@@ -54,9 +54,9 @@ KC_CAPS,      KC_TAB,    KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,     KC_Y,
   *        |TOGRGB|      |      |      |Sat(-)|Hue(-)|Hue(+)|Sat(+)|      |      |Brght-|Brght+|
   *        |------+------+------+------+------+-------------+------+------+------+------+------|
   *        |  `   |      |      |      |      |      |      |      |      |      |      |   =  |
-   *        |+------+------+------+------+-----+------+------+------+------+------+------+------|--------------.
+   *        |+------+------+------+------+-----+------+------+------+------+------+------+------|
-   *        |      |      |  Up  |      |      |      |      |      |      |   [  |   ]  |   \  |    NumLock   |
+   *  RotEn |      |      |  Up  |      |      |      |      |      |      |   [  |   ]  |   \  |
-   * ,------+------+------+------+------+------+------+------+------+------+------+------+------|--------------'
+   * ,------+------+------+------+------+------+------+------+------+------+------+------+------|
   * | Home |      | Left | Down |Right |      |      |      |      |      |      |      |      |
   * |------+------+------+------+------+------+-------------+------+------+------+------+------|
   * |      |      |      |      |      |      |      |      |      |      |      |      |      |
@@ -67,7 +67,7 @@ KC_CAPS,      KC_TAB,    KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,     KC_Y,
    [_LOWER] = LAYOUT(
              RGB_TOG,  KC_TRNS,  KC_TRNS,  KC_TRNS,  RGB_SAD,  RGB_HUD,  RGB_HUI,  RGB_SAI,  KC_TRNS,  KC_TRNS,  RGB_VAD,  RGB_VAI,
              KC_GRAVE, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_EQUAL,
-KC_NLCK,      KC_TRNS,  KC_TRNS,  KC_UP,    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_LBRC,  KC_RBRC,  KC_BSLS, 
+    KC_NLCK,  KC_TRNS,  KC_TRNS,  KC_UP,    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_LBRC,  KC_RBRC,  KC_BSLS, 
    KC_HOME,  KC_TRNS,  KC_LEFT,  KC_DOWN,  KC_RGHT,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
    KC_END,   KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_PSCR
diff --git a/keyboards/ropro/keymaps/default/readme.md b/keyboards/kingly_keys/ropro/keymaps/default/readme.md
index 5d7ff3dcc..5d7ff3dcc 100644
--- a/keyboards/ropro/keymaps/default/readme.md
+++ b/keyboards/kingly_keys/ropro/keymaps/default/readme.md
diff --git a/keyboards/ropro/readme.md b/keyboards/kingly_keys/ropro/readme.md
index 0a90c87f8..0a90c87f8 100644
--- a/keyboards/ropro/readme.md
+++ b/keyboards/kingly_keys/ropro/readme.md
diff --git a/keyboards/ropro/ropro.c b/keyboards/kingly_keys/ropro/ropro.c
index ccb1ed0df..ccb1ed0df 100644
--- a/keyboards/ropro/ropro.c
+++ b/keyboards/kingly_keys/ropro/ropro.c
diff --git a/keyboards/ropro/ropro.h b/keyboards/kingly_keys/ropro/ropro.h
index cb635cff3..cb635cff3 100644
--- a/keyboards/ropro/ropro.h
+++ b/keyboards/kingly_keys/ropro/ropro.h
diff --git a/keyboards/kingly_keys/ropro/rules.mk b/keyboards/kingly_keys/ropro/rules.mk
new file mode 100644
index 000000000..0819dbafa
--- /dev/null
+++ b/keyboards/kingly_keys/ropro/rules.mk
@@ -0,0 +1,33 @@
+# MCU name
+MCU = atmega32u4
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = caterina
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+ENCODER_ENABLE = yes
+RGBLIGHT_ENABLE = yes
+LAYOUTS_HAS_RGB = yes
diff --git a/keyboards/kingly_keys/smd_milk/2_milk.c b/keyboards/kingly_keys/smd_milk/2_milk.c
new file mode 100644
index 000000000..95fa50e02
--- /dev/null
+++ b/keyboards/kingly_keys/smd_milk/2_milk.c
@@ -0,0 +1,16 @@
+/* Copyright 2019 Sebastian Williams
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "smd_milk.h"
diff --git a/keyboards/kingly_keys/smd_milk/2_milk.h b/keyboards/kingly_keys/smd_milk/2_milk.h
new file mode 100644
index 000000000..8f294817f
--- /dev/null
+++ b/keyboards/kingly_keys/smd_milk/2_milk.h
@@ -0,0 +1,26 @@
+/* Copyright 2019 Sebastian Williams
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+#include "quantum.h"
+#define LAYOUT( \
+  K00,  \
+  K01  \
+) { \
+  { K00 }, \
+  { K01 } \
+}
diff --git a/keyboards/kingly_keys/smd_milk/config.h b/keyboards/kingly_keys/smd_milk/config.h
new file mode 100644
index 000000000..6e16d373d
--- /dev/null
+++ b/keyboards/kingly_keys/smd_milk/config.h
@@ -0,0 +1,56 @@
+/* Copyright 2019 Sebastian Williams
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+#include "config_common.h"
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0xB195
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Kingly-Keys
+#define PRODUCT         SMD-2% Milk
+#define DESCRIPTION     The SMD Ed. of the Milk themed 2% Keyboard by rionlion100
+/* key matrix size */
+#define MATRIX_ROWS 2
+#define MATRIX_COLS 1
+/* key matrix pins */
+#define MATRIX_ROW_PINS { C5, D2 }
+#define MATRIX_COL_PINS { D3 }
+#define UNUSED_PINS
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION ROW2COL
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+#define FORCE_NKRO
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+/* ws2812 RGB LED */
+#define RGB_DI_PIN B3
+#define RGBLED_NUM 4  // Number of LEDs
+#define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_HUE_STEP 6
+#define RGBLIGHT_SAT_STEP 4
+#define RGBLIGHT_VAL_STEP 10
+\ No newline at end of file
diff --git a/keyboards/kingly_keys/smd_milk/info.json b/keyboards/kingly_keys/smd_milk/info.json
new file mode 100644
index 000000000..8d9dbab99
--- /dev/null
+++ b/keyboards/kingly_keys/smd_milk/info.json
@@ -0,0 +1,15 @@
+{
+  "keyboard_name": "smd_milk",
+  "keyboard_folder": "kinlgy_keys/smd_milk",
+  "url": "",
+  "maintainer": "TheRoyalSweatshirt",
+  "width": 1,
+  "height": 2,
+  "layouts": {
+    "LAYOUT": {
+      "key_count": 2,
+      "layout": [ {"x": 0, "y": 0 }, {"x": 0, "y": 1 }]
+    }
+  }
+}
diff --git a/keyboards/kingly_keys/smd_milk/keymaps/default/keymap.c b/keyboards/kingly_keys/smd_milk/keymaps/default/keymap.c
new file mode 100644
index 000000000..22fb9cad6
--- /dev/null
+++ b/keyboards/kingly_keys/smd_milk/keymaps/default/keymap.c
@@ -0,0 +1,8 @@
+#include QMK_KEYBOARD_H
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+      [0] = LAYOUT(
+          KC_HOME,
+          KC_END
+          )
+};
diff --git a/keyboards/kingly_keys/smd_milk/readme.md b/keyboards/kingly_keys/smd_milk/readme.md
new file mode 100644
index 000000000..98823d54a
--- /dev/null
+++ b/keyboards/kingly_keys/smd_milk/readme.md
@@ -0,0 +1,21 @@
+# 2% Milk
+![SMD_MILK](https://i.imgur.com/oAeKSGF.jpg)
+An SMD Version of the 2% Meme board themed around a milk carton and love
+Keyboard Maintainer: [Garret G.](https://github.com/TheRoyalSweatshirt) a.k.a. [/u/The_Royal](https://www.reddit.com/user/The_Royal)  
+Hardware Availability: Through GB
+Make example for this keyboard (after setting up your build environment):
+    make kingly_keys/smd_milk:default
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+### Credits
+ Original Concept by rionlion100
+ Case design by Soft
+ Original 2% Milk PCB by PyroL
+ new SMD PCB by The_Royal
+ Name by jetpacktuxedo
diff --git a/keyboards/kingly_keys/smd_milk/rules.mk b/keyboards/kingly_keys/smd_milk/rules.mk
new file mode 100644
index 000000000..815f4866c
--- /dev/null
+++ b/keyboards/kingly_keys/smd_milk/rules.mk
@@ -0,0 +1,26 @@
+# MCU name
+MCU = atmega32u2
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE  = no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  = no   # Mouse keys(+4700)
+EXTRAKEY_ENABLE  = no   # Audio control and System control(+450)
+CONSOLE_ENABLE  = yes   # Console for debug(+400)
+COMMAND_ENABLE  = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE  = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE  = yes              # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE  = no  # Custom backlighting code is used, so this should not be enabled
+AUDIO_ENABLE  = no # This can be enabled if a speaker is connected to the expansion port. Not compatible with RGBLIGHT below
+RGBLIGHT_ENABLE  = yes # This can be enabled if a ws2812 strip is connected to the expansion port.
diff --git a/keyboards/kingly_keys/smd_milk/smd_milk.c b/keyboards/kingly_keys/smd_milk/smd_milk.c
new file mode 100644
index 000000000..95fa50e02
--- /dev/null
+++ b/keyboards/kingly_keys/smd_milk/smd_milk.c
@@ -0,0 +1,16 @@
+/* Copyright 2019 Sebastian Williams
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "smd_milk.h"
diff --git a/keyboards/kingly_keys/smd_milk/smd_milk.h b/keyboards/kingly_keys/smd_milk/smd_milk.h
new file mode 100644
index 000000000..8f294817f
--- /dev/null
+++ b/keyboards/kingly_keys/smd_milk/smd_milk.h
@@ -0,0 +1,26 @@
+/* Copyright 2019 Sebastian Williams
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+#include "quantum.h"
+#define LAYOUT( \
+  K00,  \
+  K01  \
+) { \
+  { K00 }, \
+  { K01 } \
+}
diff --git a/keyboards/kingly_keys/soap/README.md b/keyboards/kingly_keys/soap/README.md
new file mode 100644
index 000000000..0e32244d2
--- /dev/null
+++ b/keyboards/kingly_keys/soap/README.md
@@ -0,0 +1,16 @@
+SOAP
+===
+![SOAP](https://i.imgur.com/6h6O4QP.png)
+A Sanitary, "SOAP" Themed, Macro Pad by [Garret G.](https://github.com/TheRoyalSweatshirt) a.k.a. [/u/The_Royal](https://www.reddit.com/user/The_Royal)  
+Keyboard Maintainer: [Garret G.](https://github.com/TheRoyalSweatshirt) a.k.a. [/u/The_Royal](https://www.reddit.com/user/The_Royal/) of Reddit.  
+Hardware Supported: SOAP rev1.0, rev2.0 PCB  
+Hardware Availability: [Kingly-Keys.xyz](https://kingly-keys.xyz/) - (Through GB)  
+Make example for this keyboard (after setting up your build environment):
+    make kingly_keys/soap:default
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.  Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs)
diff --git a/keyboards/kingly_keys/soap/config.h b/keyboards/kingly_keys/soap/config.h
new file mode 100644
index 000000000..2ffbaacc7
--- /dev/null
+++ b/keyboards/kingly_keys/soap/config.h
@@ -0,0 +1,54 @@
+/* Copyright 2019 Garret G. (TheRoyalSweatshirt)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.#pragma once 
+ */
+#include "config_common.h" 
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0003
+#define DEVICE_VER      0x0004
+#define MANUFACTURER    Kingly-Keys
+#define PRODUCT         SOAP
+#define DESCRIPTION     A Sanitary "Soap" Themed Macropad with Rotary Encoder
+ /* key matrix size */
+#define MATRIX_ROWS 2
+#define MATRIX_COLS 4
+#define ENCODERS_PAD_A { D6 }
+#define ENCODERS_PAD_B { D7 }
+ /* key matrix pins */
+#define MATRIX_ROW_PINS { C7, C6 }
+#define MATRIX_COL_PINS { F4, F1, F0, D5 }
+#define UNUSED_PINS
+ /* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+ /* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+ /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+ /* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+/* ws2812 RGB LED --- DIN Pin Routed to VIA on main PCB marked "RGB" */
+#define RGB_DI_PIN B6
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 3
diff --git a/keyboards/kingly_keys/soap/info.json b/keyboards/kingly_keys/soap/info.json
new file mode 100644
index 000000000..257391eea
--- /dev/null
+++ b/keyboards/kingly_keys/soap/info.json
@@ -0,0 +1,13 @@
+{
+  "keyboard_name": "soap",
+  "url": "https://github.com/TheRoyalSweatshirt/SOAP",
+  "maintainer": "[TheRoyalSweatshirt](https://github.com/TheRoyalSweatshirt)",
+  "width": 4,
+  "height": 2,
+  "layouts": {
+    "LAYOUT": {
+      "key_count": 8,
+      "layout": [{"label":"K00", "x":0, "y":0}, {"label":"K01", "x":1, "y":0}, {"label":"K02", "x":2, "y":0}, {"label":"K03", "x":4, "y":0}, {"label":"K10", "x":0, "y":1}, {"label":"K11", "x":1, "y":1}, {"label":"K12", "x":2, "y":1}, {"label":"K13", "x":4, "y":1}]
+    }
+  }
+}
diff --git a/keyboards/kingly_keys/soap/keymaps/default/keymap.c b/keyboards/kingly_keys/soap/keymaps/default/keymap.c
new file mode 100644
index 000000000..03966e42b
--- /dev/null
+++ b/keyboards/kingly_keys/soap/keymaps/default/keymap.c
@@ -0,0 +1,62 @@
+/* Copyright 2019 Garret G. (TheRoyalSweatshirt)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+#define BASE 0
+#define FN 1
+#define RGB RGB_MOD
+#define XXX KC_NO
+#define KC_TR KC_TRANSPARENT
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* BASE
+   * ,----------------------------------------.
+   * |  DEL  |   UP  | ENTER |       |  RGB   |
+   * |-------+-------+-------+-------+--------|
+   * | LEFT  | DOWN  | RIGHT |       |   FN   |
+   * `----------------------------------------'
+   */
+        [BASE] = LAYOUT(
+    KC_DEL,  KC_UP,   KC_ENT,           RGB, 
+    KC_LEFT, KC_DOWN, KC_RIGHT,         MO(1)
+  ),
+    /* FN
+   * ,----------------------------------------.
+   * |  HU+  |  Br+  |  Sat+ |       |        |
+   * |-------+-------+-------+-------+--------|
+   * |  HU-  |  Br-  |  Sat- |       |        |
+   * `----------------------------------------'
+   */
+        [FN] = LAYOUT(
+    RGB_HUI, RGB_VAI, RGB_SAI,         KC_TR, 
+    RGB_HUD, RGB_VAD, RGB_SAD,         KC_TR
+  )
+};
+    /*      Rotary Encoder Settings:                     */
+    /*       - Current Value = Horizontal Scrolling      */
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) {
+        if (clockwise) {
+            tap_code(KC_WH_L);
+        } else {
+            tap_code(KC_WH_R);
+        }
+    }
+}
diff --git a/keyboards/kingly_keys/soap/rules.mk b/keyboards/kingly_keys/soap/rules.mk
new file mode 100644
index 000000000..7e98ab6eb
--- /dev/null
+++ b/keyboards/kingly_keys/soap/rules.mk
@@ -0,0 +1,32 @@
+# MCU name
+MCU = atmega32u4
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+ENCODER_ENABLE = yes
+RGBLIGHT_ENABLE = yes
+LAYOUTS_HAS_RGB = yes
diff --git a/keyboards/kingly_keys/soap/soap.c b/keyboards/kingly_keys/soap/soap.c
new file mode 100644
index 000000000..a467c54b7
--- /dev/null
+++ b/keyboards/kingly_keys/soap/soap.c
@@ -0,0 +1 @@
+#include "soap.h"
diff --git a/keyboards/kingly_keys/soap/soap.h b/keyboards/kingly_keys/soap/soap.h
new file mode 100644
index 000000000..8d5eba3ad
--- /dev/null
+++ b/keyboards/kingly_keys/soap/soap.h
@@ -0,0 +1,32 @@
+/* Copyright 2019 Garret G. (TheRoyalSweatshirt)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * 
+ * Note:  Matrix is a little wacky with the rotary encoder click mapping being
+ * on the opposite side of the board.  Remember to pay attention to 
+ * the 13th column where the lone key mapped for rotary encoder click (K132).
+*/
+#pragma once
+#include "quantum.h"
+#define LAYOUT( \
+    K00, K01, K02, K03, \
+    K10, K11, K12, K13 \
+) { \
+    { K00, K01, K02, K03 }, \
+    { K10, K11, K12, K13 } \
+}
diff --git a/keyboards/romac/rules.mk b/keyboards/romac/rules.mk
deleted file mode 100644
index b500f1b88..000000000
--- a/keyboards/romac/rules.mk
+++ /dev/null
@@ -1,57 +0,0 @@
-# MCU name
-MCU = atmega32u4
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-# Boot Section Size in *bytes*
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = full # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes   # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes   # Audio control and System control(+450)
-CONSOLE_ENABLE = no     # Console for debug(+400)
-COMMAND_ENABLE = no    # Commands for debug and configuration
-SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes               # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
-AUDIO_ENABLE = no
-RGBLIGHT_ENABLE = no
diff --git a/keyboards/ropro/rules.mk b/keyboards/ropro/rules.mk
deleted file mode 100644
index c63f62146..000000000
--- a/keyboards/ropro/rules.mk
+++ /dev/null
@@ -1,67 +0,0 @@
-# MCU name
-MCU = atmega32u4
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-# Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
-BOOTLOADER = caterina
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no        # Console for debug(+400)
-COMMAND_ENABLE = no        # Commands for debug and configuration
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no            # MIDI controls
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-ENCODER_ENABLE = yes
-RGBLIGHT_ENABLE = yes
-LAYOUTS_HAS_RGB = yes