1 files changed, 13 insertions, 0 deletions

diff --git a/lib/usbhost/USB_Host_Shield_2.0/WiiCameraReadme.md b/lib/usbhost/USB_Host_Shield_2.0/WiiCameraReadme.md
new file mode 100644
index 000000000..8577d73fb
--- /dev/null
+++ b/lib/usbhost/USB_Host_Shield_2.0/WiiCameraReadme.md
@@ -0,0 +1,13 @@
+Please see <http://wiibrew.org/wiki/Wiimote#IR_Camera> for the complete capabilities of the Wii camera. The IR camera code was written based on the above website and with support from Kristian Lauszus.
+
+This library is large, if you run into memory problems when uploading to the Arduino, disable serial debugging.
+
+To enable the IR camera code, simply set ```ENABLE_WII_IR_CAMERA``` to 1 in [settings.h](settings.h).
+
+This library implements the following settings:
+
+* Report sensitivity mode: 00 00 00 00 00 00 90 00 41    40 00   Suggested by inio (high sensitivity)
+* Data Format: Extended mode (0x03).  Full mode is not working yet. The output reports 0x3e and 0x3f need tampering with
+        * In this mode the camera outputs x and y coordinates and a size dimension for the 4 brightest points.
+
+Again, read through <http://wiibrew.org/wiki/Wiimote#IR_Camera> to get an understanding of the camera and its settings.