1 files changed, 255 insertions, 0 deletions

diff --git a/lib/usbhost/USB_Host_Shield_2.0/max_LCD.cpp b/lib/usbhost/USB_Host_Shield_2.0/max_LCD.cpp
new file mode 100644
index 000000000..f0c64666f
--- /dev/null
+++ b/lib/usbhost/USB_Host_Shield_2.0/max_LCD.cpp
@@ -0,0 +1,255 @@
+/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
+
+This software may be distributed and modified under the terms of the GNU
+General Public License version 2 (GPL2) as published by the Free Software
+Foundation and appearing in the file GPL2.TXT included in the packaging of
+this file. Please note that GPL2 Section 2[b] requires that all works based
+on this software must also be made publicly available under the terms of
+the GPL2 ("Copyleft").
+
+Contact information
+-------------------
+
+Circuits At Home, LTD
+Web      :  http://www.circuitsathome.com
+e-mail   :  support@circuitsathome.com
+ */
+#include "max_LCD.h"
+#include <string.h>
+
+// pin definition and set/clear
+
+#define RS  0x04    // RS pin
+#define E   0x08    // E pin
+
+#define SET_RS  lcdPins |= RS
+#define CLR_RS  lcdPins &= ~RS
+#define SET_E   lcdPins |= E
+#define CLR_E   lcdPins &= ~E
+
+#define SENDlcdPins()   pUsb->gpioWr( lcdPins )
+
+#define LCD_sendcmd(a)  {   CLR_RS;             \
+                            sendbyte(a);    \
+                        }
+
+#define LCD_sendchar(a) {   SET_RS;             \
+                            sendbyte(a);    \
+                        }
+
+static byte lcdPins; //copy of LCD pins
+
+Max_LCD::Max_LCD(USB *pusb) : pUsb(pusb) {
+        lcdPins = 0;
+}
+
+void Max_LCD::init() {
+        _displayfunction = LCD_4BITMODE | LCD_1LINE | LCD_5x8DOTS;
+
+        //   MAX3421E::gpioWr(0x55);
+
+        begin(16, 1);
+}
+
+void Max_LCD::begin(uint8_t cols, uint8_t lines, uint8_t dotsize) {
+        if(lines > 1) {
+                _displayfunction |= LCD_2LINE;
+        }
+        _numlines = lines;
+        _currline = 0;
+
+        // for some 1 line displays you can select a 10 pixel high font
+        if((dotsize != 0) && (lines == 1)) {
+                _displayfunction |= LCD_5x10DOTS;
+        }
+
+        // SEE PAGE 45/46 FOR INITIALIZATION SPECIFICATION!
+        // according to datasheet, we need at least 40ms after power rises above 2.7V
+        // before sending commands. Arduino can turn on way befer 4.5V so we'll wait 50
+        delayMicroseconds(50000);
+        lcdPins = 0x30;
+        SET_E;
+        SENDlcdPins();
+        CLR_E;
+        SENDlcdPins();
+        delayMicroseconds(10000); // wait min 4.1ms
+        //second try
+        SET_E;
+        SENDlcdPins();
+        CLR_E;
+        SENDlcdPins();
+        delayMicroseconds(10000); // wait min 4.1ms
+        // third go!
+        SET_E;
+        SENDlcdPins();
+        CLR_E;
+        SENDlcdPins();
+        delayMicroseconds(10000);
+        // finally, set to 4-bit interface
+        lcdPins = 0x20;
+        //SET_RS;
+        SET_E;
+        SENDlcdPins();
+        //CLR_RS;
+        CLR_E;
+        SENDlcdPins();
+        delayMicroseconds(10000);
+        // finally, set # lines, font size, etc.
+        command(LCD_FUNCTIONSET | _displayfunction);
+
+        // turn the display on with no cursor or blinking default
+        _displaycontrol = LCD_DISPLAYON | LCD_CURSOROFF | LCD_BLINKOFF;
+        display();
+
+        // clear it off
+        clear();
+
+        // Initialize to default text direction (for romance languages)
+        _displaymode = LCD_ENTRYLEFT | LCD_ENTRYSHIFTDECREMENT;
+        // set the entry mode
+        command(LCD_ENTRYMODESET | _displaymode);
+}
+
+/********** high level commands, for the user! */
+void Max_LCD::clear() {
+        command(LCD_CLEARDISPLAY); // clear display, set cursor position to zero
+        delayMicroseconds(2000); // this command takes a long time!
+}
+
+void Max_LCD::home() {
+        command(LCD_RETURNHOME); // set cursor position to zero
+        delayMicroseconds(2000); // this command takes a long time!
+}
+
+void Max_LCD::setCursor(uint8_t col, uint8_t row) {
+        int row_offsets[] = {0x00, 0x40, 0x14, 0x54};
+        if(row > _numlines) {
+                row = _numlines - 1; // we count rows starting w/0
+        }
+
+        command(LCD_SETDDRAMADDR | (col + row_offsets[row]));
+}
+
+// Turn the display on/off (quickly)
+
+void Max_LCD::noDisplay() {
+        _displaycontrol &= ~LCD_DISPLAYON;
+        command(LCD_DISPLAYCONTROL | _displaycontrol);
+}
+
+void Max_LCD::display() {
+        _displaycontrol |= LCD_DISPLAYON;
+        command(LCD_DISPLAYCONTROL | _displaycontrol);
+}
+
+// Turns the underline cursor on/off
+
+void Max_LCD::noCursor() {
+        _displaycontrol &= ~LCD_CURSORON;
+        command(LCD_DISPLAYCONTROL | _displaycontrol);
+}
+
+void Max_LCD::cursor() {
+        _displaycontrol |= LCD_CURSORON;
+        command(LCD_DISPLAYCONTROL | _displaycontrol);
+}
+
+
+// Turn on and off the blinking cursor
+
+void Max_LCD::noBlink() {
+        _displaycontrol &= ~LCD_BLINKON;
+        command(LCD_DISPLAYCONTROL | _displaycontrol);
+}
+
+void Max_LCD::blink() {
+        _displaycontrol |= LCD_BLINKON;
+        command(LCD_DISPLAYCONTROL | _displaycontrol);
+}
+
+// These commands scroll the display without changing the RAM
+
+void Max_LCD::scrollDisplayLeft(void) {
+        command(LCD_CURSORSHIFT | LCD_DISPLAYMOVE | LCD_MOVELEFT);
+}
+
+void Max_LCD::scrollDisplayRight(void) {
+        command(LCD_CURSORSHIFT | LCD_DISPLAYMOVE | LCD_MOVERIGHT);
+}
+
+// This is for text that flows Left to Right
+
+void Max_LCD::leftToRight(void) {
+        _displaymode |= LCD_ENTRYLEFT;
+        command(LCD_ENTRYMODESET | _displaymode);
+}
+
+// This is for text that flows Right to Left
+
+void Max_LCD::rightToLeft(void) {
+        _displaymode &= ~LCD_ENTRYLEFT;
+        command(LCD_ENTRYMODESET | _displaymode);
+}
+
+// This will 'right justify' text from the cursor
+
+void Max_LCD::autoscroll(void) {
+        _displaymode |= LCD_ENTRYSHIFTINCREMENT;
+        command(LCD_ENTRYMODESET | _displaymode);
+}
+
+// This will 'left justify' text from the cursor
+
+void Max_LCD::noAutoscroll(void) {
+        _displaymode &= ~LCD_ENTRYSHIFTINCREMENT;
+        command(LCD_ENTRYMODESET | _displaymode);
+}
+
+// Allows us to fill the first 8 CGRAM locations
+// with custom characters
+
+void Max_LCD::createChar(uint8_t location, uint8_t charmap[]) {
+        location &= 0x7; // we only have 8 locations 0-7
+        command(LCD_SETCGRAMADDR | (location << 3));
+        for(int i = 0; i < 8; i++) {
+                write(charmap[i]);
+        }
+}
+
+/*********** mid level commands, for sending data/cmds */
+
+inline void Max_LCD::command(uint8_t value) {
+        LCD_sendcmd(value);
+        delayMicroseconds(100);
+}
+
+#if defined(ARDUINO) && ARDUINO >=100
+
+inline size_t Max_LCD::write(uint8_t value) {
+        LCD_sendchar(value);
+        return 1; // Assume success
+}
+#else
+
+inline void Max_LCD::write(uint8_t value) {
+        LCD_sendchar(value);
+}
+#endif
+
+void Max_LCD::sendbyte(uint8_t val) {
+        lcdPins &= 0x0f; //prepare place for the upper nibble
+        lcdPins |= (val & 0xf0); //copy upper nibble to LCD variable
+        SET_E; //send
+        SENDlcdPins();
+        delayMicroseconds(2);
+        CLR_E;
+        delayMicroseconds(2);
+        SENDlcdPins();
+        lcdPins &= 0x0f; //prepare place for the lower nibble
+        lcdPins |= (val << 4) & 0xf0; //copy lower nibble to LCD variable
+        SET_E; //send
+        SENDlcdPins();
+        CLR_E;
+        SENDlcdPins();
+        delayMicroseconds(100);
+}