1 files changed, 252 insertions, 0 deletions

diff --git a/lib/usbhost/USB_Host_Shield_2.0/usbhub.h b/lib/usbhost/USB_Host_Shield_2.0/usbhub.h
new file mode 100644
index 000000000..1ac949445
--- /dev/null
+++ b/lib/usbhost/USB_Host_Shield_2.0/usbhub.h
@@ -0,0 +1,252 @@
+/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
+
+This software may be distributed and modified under the terms of the GNU
+General Public License version 2 (GPL2) as published by the Free Software
+Foundation and appearing in the file GPL2.TXT included in the packaging of
+this file. Please note that GPL2 Section 2[b] requires that all works based
+on this software must also be made publicly available under the terms of
+the GPL2 ("Copyleft").
+
+Contact information
+-------------------
+
+Circuits At Home, LTD
+Web      :  http://www.circuitsathome.com
+e-mail   :  support@circuitsathome.com
+ */
+#if !defined(__USBHUB_H__)
+#define __USBHUB_H__
+
+#include "Usb.h"
+
+#define USB_DESCRIPTOR_HUB                      0x09 // Hub descriptor type
+
+// Hub Requests
+#define bmREQ_CLEAR_HUB_FEATURE                 USB_SETUP_HOST_TO_DEVICE|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_DEVICE
+#define bmREQ_CLEAR_PORT_FEATURE                USB_SETUP_HOST_TO_DEVICE|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_OTHER
+#define bmREQ_CLEAR_TT_BUFFER                   USB_SETUP_HOST_TO_DEVICE|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_OTHER
+#define bmREQ_GET_HUB_DESCRIPTOR                USB_SETUP_DEVICE_TO_HOST|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_DEVICE
+#define bmREQ_GET_HUB_STATUS                    USB_SETUP_DEVICE_TO_HOST|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_DEVICE
+#define bmREQ_GET_PORT_STATUS                   USB_SETUP_DEVICE_TO_HOST|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_OTHER
+#define bmREQ_RESET_TT                          USB_SETUP_HOST_TO_DEVICE|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_OTHER
+#define bmREQ_SET_HUB_DESCRIPTOR                USB_SETUP_HOST_TO_DEVICE|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_DEVICE
+#define bmREQ_SET_HUB_FEATURE                   USB_SETUP_HOST_TO_DEVICE|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_DEVICE
+#define bmREQ_SET_PORT_FEATURE                  USB_SETUP_HOST_TO_DEVICE|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_OTHER
+#define bmREQ_GET_TT_STATE                      USB_SETUP_DEVICE_TO_HOST|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_OTHER
+#define bmREQ_STOP_TT                           USB_SETUP_HOST_TO_DEVICE|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_OTHER
+
+// Hub Class Requests
+#define HUB_REQUEST_CLEAR_TT_BUFFER             8
+#define HUB_REQUEST_RESET_TT                    9
+#define HUB_REQUEST_GET_TT_STATE                10
+#define HUB_REQUEST_STOP_TT                     11
+
+// Hub Features
+#define HUB_FEATURE_C_HUB_LOCAL_POWER           0
+#define HUB_FEATURE_C_HUB_OVER_CURRENT          1
+#define HUB_FEATURE_PORT_CONNECTION             0
+#define HUB_FEATURE_PORT_ENABLE                 1
+#define HUB_FEATURE_PORT_SUSPEND                2
+#define HUB_FEATURE_PORT_OVER_CURRENT           3
+#define HUB_FEATURE_PORT_RESET                  4
+#define HUB_FEATURE_PORT_POWER                  8
+#define HUB_FEATURE_PORT_LOW_SPEED              9
+#define HUB_FEATURE_C_PORT_CONNECTION           16
+#define HUB_FEATURE_C_PORT_ENABLE               17
+#define HUB_FEATURE_C_PORT_SUSPEND              18
+#define HUB_FEATURE_C_PORT_OVER_CURRENT         19
+#define HUB_FEATURE_C_PORT_RESET                20
+#define HUB_FEATURE_PORT_TEST                   21
+#define HUB_FEATURE_PORT_INDICATOR              22
+
+// Hub Port Test Modes
+#define HUB_PORT_TEST_MODE_J                    1
+#define HUB_PORT_TEST_MODE_K                    2
+#define HUB_PORT_TEST_MODE_SE0_NAK              3
+#define HUB_PORT_TEST_MODE_PACKET               4
+#define HUB_PORT_TEST_MODE_FORCE_ENABLE         5
+
+// Hub Port Indicator Color
+#define HUB_PORT_INDICATOR_AUTO                 0
+#define HUB_PORT_INDICATOR_AMBER                1
+#define HUB_PORT_INDICATOR_GREEN                2
+#define HUB_PORT_INDICATOR_OFF                  3
+
+// Hub Port Status Bitmasks
+#define bmHUB_PORT_STATUS_PORT_CONNECTION       0x0001
+#define bmHUB_PORT_STATUS_PORT_ENABLE           0x0002
+#define bmHUB_PORT_STATUS_PORT_SUSPEND          0x0004
+#define bmHUB_PORT_STATUS_PORT_OVER_CURRENT     0x0008
+#define bmHUB_PORT_STATUS_PORT_RESET            0x0010
+#define bmHUB_PORT_STATUS_PORT_POWER            0x0100
+#define bmHUB_PORT_STATUS_PORT_LOW_SPEED        0x0200
+#define bmHUB_PORT_STATUS_PORT_HIGH_SPEED       0x0400
+#define bmHUB_PORT_STATUS_PORT_TEST             0x0800
+#define bmHUB_PORT_STATUS_PORT_INDICATOR        0x1000
+
+// Hub Port Status Change Bitmasks (used one byte instead of two)
+#define bmHUB_PORT_STATUS_C_PORT_CONNECTION     0x0001
+#define bmHUB_PORT_STATUS_C_PORT_ENABLE         0x0002
+#define bmHUB_PORT_STATUS_C_PORT_SUSPEND        0x0004
+#define bmHUB_PORT_STATUS_C_PORT_OVER_CURRENT   0x0008
+#define bmHUB_PORT_STATUS_C_PORT_RESET          0x0010
+
+// Hub Status Bitmasks (used one byte instead of two)
+#define bmHUB_STATUS_LOCAL_POWER_SOURCE         0x01
+#define bmHUB_STATUS_OVER_CURRENT               0x12
+
+// Hub Status Change Bitmasks (used one byte instead of two)
+#define bmHUB_STATUS_C_LOCAL_POWER_SOURCE       0x01
+#define bmHUB_STATUS_C_OVER_CURRENT             0x12
+
+
+// Hub Port Configuring Substates
+#define USB_STATE_HUB_PORT_CONFIGURING          0xb0
+#define USB_STATE_HUB_PORT_POWERED_OFF          0xb1
+#define USB_STATE_HUB_PORT_WAIT_FOR_POWER_GOOD  0xb2
+#define USB_STATE_HUB_PORT_DISCONNECTED         0xb3
+#define USB_STATE_HUB_PORT_DISABLED             0xb4
+#define USB_STATE_HUB_PORT_RESETTING            0xb5
+#define USB_STATE_HUB_PORT_ENABLED              0xb6
+
+// Additional Error Codes
+#define HUB_ERROR_PORT_HAS_BEEN_RESET           0xb1
+
+// The bit mask to check for all necessary state bits
+#define bmHUB_PORT_STATUS_ALL_MAIN              ((0UL | bmHUB_PORT_STATUS_C_PORT_CONNECTION | bmHUB_PORT_STATUS_C_PORT_ENABLE | bmHUB_PORT_STATUS_C_PORT_SUSPEND | bmHUB_PORT_STATUS_C_PORT_RESET) << 16) | bmHUB_PORT_STATUS_PORT_POWER | bmHUB_PORT_STATUS_PORT_ENABLE | bmHUB_PORT_STATUS_PORT_CONNECTION | bmHUB_PORT_STATUS_PORT_SUSPEND)
+
+// Bit mask to check for DISABLED state in HubEvent::bmStatus field
+#define bmHUB_PORT_STATE_CHECK_DISABLED         (0x0000 | bmHUB_PORT_STATUS_PORT_POWER | bmHUB_PORT_STATUS_PORT_ENABLE | bmHUB_PORT_STATUS_PORT_CONNECTION | bmHUB_PORT_STATUS_PORT_SUSPEND)
+
+// Hub Port States
+#define bmHUB_PORT_STATE_DISABLED               (0x0000 | bmHUB_PORT_STATUS_PORT_POWER | bmHUB_PORT_STATUS_PORT_CONNECTION)
+
+// Hub Port Events
+#define bmHUB_PORT_EVENT_CONNECT                (((0UL | bmHUB_PORT_STATUS_C_PORT_CONNECTION) << 16) | bmHUB_PORT_STATUS_PORT_POWER | bmHUB_PORT_STATUS_PORT_CONNECTION)
+#define bmHUB_PORT_EVENT_DISCONNECT             (((0UL | bmHUB_PORT_STATUS_C_PORT_CONNECTION) << 16) | bmHUB_PORT_STATUS_PORT_POWER)
+#define bmHUB_PORT_EVENT_RESET_COMPLETE         (((0UL | bmHUB_PORT_STATUS_C_PORT_RESET) << 16) | bmHUB_PORT_STATUS_PORT_POWER | bmHUB_PORT_STATUS_PORT_ENABLE | bmHUB_PORT_STATUS_PORT_CONNECTION)
+
+#define bmHUB_PORT_EVENT_LS_CONNECT             (((0UL | bmHUB_PORT_STATUS_C_PORT_CONNECTION) << 16) | bmHUB_PORT_STATUS_PORT_POWER | bmHUB_PORT_STATUS_PORT_CONNECTION | bmHUB_PORT_STATUS_PORT_LOW_SPEED)
+#define bmHUB_PORT_EVENT_LS_RESET_COMPLETE      (((0UL | bmHUB_PORT_STATUS_C_PORT_RESET) << 16) | bmHUB_PORT_STATUS_PORT_POWER | bmHUB_PORT_STATUS_PORT_ENABLE | bmHUB_PORT_STATUS_PORT_CONNECTION | bmHUB_PORT_STATUS_PORT_LOW_SPEED)
+#define bmHUB_PORT_EVENT_LS_PORT_ENABLED        (((0UL | bmHUB_PORT_STATUS_C_PORT_CONNECTION | bmHUB_PORT_STATUS_C_PORT_ENABLE) << 16) | bmHUB_PORT_STATUS_PORT_POWER | bmHUB_PORT_STATUS_PORT_ENABLE | bmHUB_PORT_STATUS_PORT_CONNECTION | bmHUB_PORT_STATUS_PORT_LOW_SPEED)
+
+struct HubDescriptor {
+        uint8_t bDescLength; // descriptor length
+        uint8_t bDescriptorType; // descriptor type
+        uint8_t bNbrPorts; // number of ports a hub equiped with
+
+        struct {
+                uint16_t LogPwrSwitchMode : 2;
+                uint16_t CompoundDevice : 1;
+                uint16_t OverCurrentProtectMode : 2;
+                uint16_t TTThinkTime : 2;
+                uint16_t PortIndicatorsSupported : 1;
+                uint16_t Reserved : 8;
+        } __attribute__((packed));
+
+        uint8_t bPwrOn2PwrGood;
+        uint8_t bHubContrCurrent;
+} __attribute__((packed));
+
+struct HubEvent {
+
+        union {
+
+                struct {
+                        uint16_t bmStatus; // port status bits
+                        uint16_t bmChange; // port status change bits
+                } __attribute__((packed));
+                uint32_t bmEvent;
+                uint8_t evtBuff[4];
+        };
+} __attribute__((packed));
+
+class USBHub : USBDeviceConfig {
+        static bool bResetInitiated; // True when reset is triggered
+
+        USB *pUsb; // USB class instance pointer
+
+        EpInfo epInfo[2]; // interrupt endpoint info structure
+
+        uint8_t bAddress; // address
+        uint8_t bNbrPorts; // number of ports
+        //        uint8_t bInitState; // initialization state variable
+        uint32_t qNextPollTime; // next poll time
+        bool bPollEnable; // poll enable flag
+
+        uint8_t CheckHubStatus();
+        uint8_t PortStatusChange(uint8_t port, HubEvent &evt);
+
+public:
+        USBHub(USB *p);
+
+        uint8_t ClearHubFeature(uint8_t fid);
+        uint8_t ClearPortFeature(uint8_t fid, uint8_t port, uint8_t sel = 0);
+        uint8_t GetHubDescriptor(uint8_t index, uint16_t nbytes, uint8_t *dataptr);
+        uint8_t GetHubStatus(uint16_t nbytes, uint8_t* dataptr);
+        uint8_t GetPortStatus(uint8_t port, uint16_t nbytes, uint8_t* dataptr);
+        uint8_t SetHubDescriptor(uint8_t port, uint16_t nbytes, uint8_t* dataptr);
+        uint8_t SetHubFeature(uint8_t fid);
+        uint8_t SetPortFeature(uint8_t fid, uint8_t port, uint8_t sel = 0);
+
+        void PrintHubStatus();
+
+        uint8_t Init(uint8_t parent, uint8_t port, bool lowspeed);
+        uint8_t Release();
+        uint8_t Poll();
+        void ResetHubPort(uint8_t port);
+
+        virtual uint8_t GetAddress() {
+                return bAddress;
+        };
+
+        virtual bool DEVCLASSOK(uint8_t klass) {
+                return (klass == 0x09);
+        }
+
+};
+
+// Clear Hub Feature
+
+inline uint8_t USBHub::ClearHubFeature(uint8_t fid) {
+        return ( pUsb->ctrlReq(bAddress, 0, bmREQ_CLEAR_HUB_FEATURE, USB_REQUEST_CLEAR_FEATURE, fid, 0, 0, 0, 0, NULL, NULL));
+}
+// Clear Port Feature
+
+inline uint8_t USBHub::ClearPortFeature(uint8_t fid, uint8_t port, uint8_t sel) {
+        return ( pUsb->ctrlReq(bAddress, 0, bmREQ_CLEAR_PORT_FEATURE, USB_REQUEST_CLEAR_FEATURE, fid, 0, ((0x0000 | port) | (sel << 8)), 0, 0, NULL, NULL));
+}
+// Get Hub Descriptor
+
+inline uint8_t USBHub::GetHubDescriptor(uint8_t index, uint16_t nbytes, uint8_t *dataptr) {
+        return ( pUsb->ctrlReq(bAddress, 0, bmREQ_GET_HUB_DESCRIPTOR, USB_REQUEST_GET_DESCRIPTOR, index, 0x29, 0, nbytes, nbytes, dataptr, NULL));
+}
+// Get Hub Status
+
+inline uint8_t USBHub::GetHubStatus(uint16_t nbytes, uint8_t* dataptr) {
+        return ( pUsb->ctrlReq(bAddress, 0, bmREQ_GET_HUB_STATUS, USB_REQUEST_GET_STATUS, 0, 0, 0x0000, nbytes, nbytes, dataptr, NULL));
+}
+// Get Port Status
+
+inline uint8_t USBHub::GetPortStatus(uint8_t port, uint16_t nbytes, uint8_t* dataptr) {
+        return ( pUsb->ctrlReq(bAddress, 0, bmREQ_GET_PORT_STATUS, USB_REQUEST_GET_STATUS, 0, 0, port, nbytes, nbytes, dataptr, NULL));
+}
+// Set Hub Descriptor
+
+inline uint8_t USBHub::SetHubDescriptor(uint8_t port, uint16_t nbytes, uint8_t* dataptr) {
+        return ( pUsb->ctrlReq(bAddress, 0, bmREQ_SET_HUB_DESCRIPTOR, USB_REQUEST_SET_DESCRIPTOR, 0, 0, port, nbytes, nbytes, dataptr, NULL));
+}
+// Set Hub Feature
+
+inline uint8_t USBHub::SetHubFeature(uint8_t fid) {
+        return ( pUsb->ctrlReq(bAddress, 0, bmREQ_SET_HUB_FEATURE, USB_REQUEST_SET_FEATURE, fid, 0, 0, 0, 0, NULL, NULL));
+}
+// Set Port Feature
+
+inline uint8_t USBHub::SetPortFeature(uint8_t fid, uint8_t port, uint8_t sel) {
+        return ( pUsb->ctrlReq(bAddress, 0, bmREQ_SET_PORT_FEATURE, USB_REQUEST_SET_FEATURE, fid, 0, (((0x0000 | sel) << 8) | port), 0, 0, NULL, NULL));
+}
+
+void PrintHubPortStatus(USB *usbptr, uint8_t addr, uint8_t port, bool print_changes = false);
+
+#endif // __USBHUB_H__